Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Visible LEDs CRM-1-0003-9903-I attributes and parameters. Explore more Visible LEDs devices from Visual Communications Company
Optoelectronic Type:
CRM-1-0003-9903-I Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
With over 40 years of experience as a global provider, we have the knowledge and the products to satisfy any application or product requirement. Our products stand out thanks to their excellent quality, innovative design, and ease of assembly. Our range of standard components is complemented by our value-added service, in which we offer components and assemblies customized according to a customer’s specific requirements. VCC manufactures one of the world’s largest ranges of HMI products. Depending on the requirements in terms of environment and function, VCC customers will find the right solution for all applications and industries. Value-added services is defined as individually modify our standard components in accordance with our customers’ needs. Depending on the design specifications, environmental requirements, we customize our standard components in close collaboration with our customers
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
KP-2012CGCK
Kingbright Electronic
KP-2012CGCK by Kingbright Electronic is a 1.3mm GREEN LED with a peak wavelength of 574nm and 40.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C, making it suitable for various visible lighting needs.
VLMRGB6112-00-GS08
Vishay Intertechnology's VLMRGB6112-00-GS08 is a 3-element LED with built-in Zener diode, featuring peak wavelengths of 630/518/468nm. With a max forward current of 0.03A and viewing angle of 60°, it's ideal for applications requiring triple color illumination in compact spaces. Suitable for surface mount installations, this LED has a nominal luminous intensity of 730.0/1030.0/230.0mcd.
LST676-Q1R2-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LST676-Q1R2-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
HLMP-1790-A00A2
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C155
Hewlett Packard
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 9/15; Lens Type: DIFFUSED; Shape: RECTANGULAR;
HLMP-3507-EF000
Broadcom
HLMP-3507-EF000 by Broadcom is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging.
TLCR5800
Vishay Intertechnology's TLCR5800 is a 5mm single color LED with peak wavelength of 622nm and max forward current of 0.05A. Ideal for applications requiring high luminous intensity, such as indicator lights in electronic devices. Operating temperature range from -40°C to 100°C makes it versatile for various environments.
APHHS1005SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Color: HYPER RED;
HSMG-C120
HSMG-C120 by Broadcom is a 1.2mm single color LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 155°, it's suitable for surface mount configurations in various electronic devices. Operating b/w -40°C to 85°C, this LED offers clear untinted nondiffused lighting with a nominal luminous intensity of 15.0mcd.
SSL-LX3044SYC
Lumex
SSL-LX3044SYC by Lumex is a 3mm single color LED with built-in resistor, emitting super yellow light at peak wavelength of 590nm. With max forward current of 0.025A and viewing angle of 30°, it's ideal for applications requiring radial mounting such as indicator lights in electronic devices.
555-3008F
Dialight
Dialight's 555-3008F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0038A, and operates b/w -55 to 100°C. Ideal for applications requiring red diffused light emission in compact spaces.
ASMB-MTB0-0B3A2
ASMB-MTB0-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. It has a peak wavelength of 634/522/465nm, max forward current of 0.025A, and viewing angle of 115°. Ideal for surface mount applications requiring vibrant RGB illumination in compact spaces.
LGR971-LM
Infineon Technologies
LGR971-LM LED by Infineon has a peak wavelength of 586nm, forward voltage of 2.5V, and max forward current of 0.025A. With a diffused lens and green color at wavelength, it's ideal for applications requiring a viewing angle of 160° in environments ranging from -30°C to 85°C.
LBQ39G-L2OO-35-1
Osram Opto Semiconductors LBQ39G-L2OO-35-1 is a 1.1mm BLUE SINGLE COLOR LED with peak wavelength of 465nm and max forward current of 0.015A. Ideal for surface mount applications, it has a viewing angle of 170° and operates b/w -30 to 85 °C temperatures.
598-8621-207F
Dialight's 598-8621-207F is a dual-color LED with water-clear lens, featuring separate configuration and 2.7mm size. With max forward current of 0.02A, it emits red-orange/green light at 3.5V for applications like indicator lights in electronics due to its compact size and surface mounting feature.
LTST-C19HE1WT
Lite-on Technology
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
KP-1608SRC-PRV
KP-1608SRC-PRV by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
KP-2012SRC-PRV
Kingbright Electronic's KP-2012SRC-PRV is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and 100.0mcd luminous intensity. Ideal for applications requiring super bright red illumination, such as indicator lights in electronic devices.
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
S4WM-2296409051-0E000K3S-00001
Seoul Semiconductor
Seoul Semiconductor's S4WM-2296409051-0E000K3S-00001 is a 22mm COB LED with max. forward current of 1.85A and voltage of 50.7V. Ideal for surface mount applications, it emits neutral white light at a wide 118° viewing angle, suitable for various lighting designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Visual Communications Company
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved