Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's M63M502KB40 is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a temperature coefficient of 100 ppm/°C.
Median Price
$6.065
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
RS Americas
1+ parts
$1.540
100+ parts
-
1k+ parts
10k+ parts
Farnell
$5.060
$3.070
$2.910
RS (Exports)
$5.770
$4.330
Newark
$6.360
$4.620
$4.020
Mouser Electronics
$6.830
$4.710
$3.840
DigiKey
$6.910
$5.042
$3.943
Nova Conductors
$3.299
Vyrian
ECAB
Ashlea Components Ltd
Netroflash
$3.134
$3.068
Argo Parts USA
Continental Prestige Electronics
$5.110
$2.460
$2.350
AZTECH Wire
$9.155
Perfect Parts
Cermet technology provides high stability and reliability, ensuring consistent performance over time.
Trimmer construction allows for precise adjustments to resistance, making it ideal for fine-tuning applications.
With a resistance of 5000 ohm, this variable resistor is suitable for a wide range of circuit applications.
With a high maximum operating temperature of 125°C, this variable resistor can withstand elevated temperatures.
The low minimum operating temperature of -55°C ensures reliable performance even in cold environments.
The temperature coefficient of 100 ppm/°C indicates minimal change in resistance with temperature variations.
Matte tin terminal finish provides good solderability and corrosion resistance for long-lasting connections.
A tolerance of 10% ensures accurate and precise resistance values for consistent circuit performance.
With a rated power dissipation of 0.5 W, this variable resistor can handle moderate power levels without overheating.
Variable Resistors M63M502KB40 attributes and parameters. Explore more Variable Resistors devices from Vishay Intertechnology
Construction:
JESD-609 Code:
Length (Lead):
Manufacturer Series:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Angle Of Rotation:
Series:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Tolerance:
M63M502KB40 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - Multiple Devices Marking 09/Jul/2020
PCN Assembly/Origin - Mult Devs Assembly Line 10/Mar/2023
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Shenzhen Yixinsemi Electronics
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Gec Plessey Semiconductors
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
3386R-1-502LF
Bourns
Bourns 3386R-1-502LF is a linear trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3309P-1-104
The Bourns 3309P-1-104 is a linear variable resistor with a resistance of 100k ohm, rated power dissipation of 0.5W, and an operating voltage of 250V. It is commonly used in applications requiring precise resistance adjustments such as audio equipment, instrumentation, and industrial controls.
84WR5KLFTR
Tt Electronics Plc
84WR5KLFTR by Tt Electronics Plc is a CERMET variable resistor with 12 turns and 5000 ohm resistance. It has a linear law of resistance, operates b/w -65 to 150 °C, and can handle up to 200V. This SMT trimmer is ideal for applications requiring precise voltage adjustments in compact electronic devices.
3296W-1-253LF
Bourns 3296W-1-253LF is a CERMET multi-turn trimmer resistor with 25 turns and 25000 ohm resistance. Operating voltage of 300V, rated power dissipation of 0.5W, and linear law of resistance make it ideal for precision applications in electronics. With a temperature coefficient of 100 ppm/°C, it ensures stable performance in temperatures ranging from -55 to 125 °C.
72PMR50LFTB
72PMR50LFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and voltage rating of 200V, it offers precise adjustment in applications requiring a resistance range from -55°C to 125°C. Its compact design with through-hole mounting makes it ideal for electronic circuits where accurate resistance control is essential.
3306W-1-501
Bourns 3306W-1-501 is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 25% tolerance. It operates b/w -25 to 100 °C and has a rated power dissipation of 0.2 W. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
KU1031S28
Precision Electronics
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Technology: CARBON;
3364W-1-503E
Bourns 3364W-1-503E is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 25% tolerance. It is used in applications requiring precise resistance adjustments due to its screw actuator, SMT package style, and surface mounting type.
RRS80RE
Ohmite Manufacturing
Ohmite Manufacturing's RRS80RE is a 80 ohm linear wire wound potentiometer with 10% tolerance. Featuring a 500 W power dissipation, it has a circular package with panel mount style for applications requiring precise resistance adjustment in horizontal orientation.
RHS5K0E
Ohmite Manufacturing's RHS5K0E is a 5000 ohm linear wire wound potentiometer with 3 lug terminals. It features a 25W power dissipation rating, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications requiring precise resistance adjustments in circuits.
RV4NAYSD103A
Nte Electronics
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
3306P-1-203
Bourns 3306P-1-203 is a CERMET trimmer resistor with 20000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for adjusting voltage with a linear law of resistance. Operating temperature ranges from -25 to 100 °C.
RK50114A0001
Alps Alpine
Alps Alpine RK50114A0001 is a 50000 ohm POTENTIOMETER with AUDIO Law Of Resistance. It features HORIZONTAL Actuator, SHAFT Type, and 20% Tolerance. Ideal for PCB Mount applications, it has THROUGH HOLE MOUNT and 300° Angle Of Rotation capabilities.
3362U-1-502LF
Bourns 3362U-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3306P-1-103
Bourns 3306P-1-103 is a CERMET trimmer resistor with 10000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for voltage control with an operating range of -25 to 100 °C.
PTV09A-2015U-B103
Bourns PTV09A-2015U-B103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. Ideal for PCB mounting applications in devices requiring precise voltage control within -10 to 50 °C operating temperature range.
6574S-1-502
Bourns 6574S-1-502 is a linear potentiometer with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, shaft actuator type, and operates b/w -40 to 125 °C. Ideal for servo mount applications requiring precise resistance adjustments in a panel-mount setup.
3299X-1-502LF
The Bourns 3299X-1-502LF is a linear trimmer pot with a resistance of 5000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications where precise resistance adjustments are required.
T63YB103JT20
Vishay Intertechnology's T63YB103JT20 is a CERMET TRIMMER resistor with 14 turns, linear resistance law, and 5% tolerance. It has a rated power dissipation of 0.25W, operates at temperatures from -55 to 155°C, and has an operating voltage of 50V. Ideal for PCB mounting applications requiring precise resistance adjustments in various electronic circuits.
3362U-1-501LF
Bourns 3362U-1-501LF is a CERMET trimmer resistor with 500 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a rated power dissipation of 0.5W and operates b/w -55°C to 125°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M63M203KB30T607
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Height (Package): 4.83 mm;
M63M201KB40
TRIMMER; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Minimum Operating Temperature: -55 Cel;
M63M202KB30T607
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Package Style (Meter): PCB Mount;
M63M201KB30T607
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Minimum Operating Temperature: -55 Cel;
M63M101KB40
M63M102KB30T607
M63M502KB30T614
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; JESD-609 Code: e3;
M63M502KB30T640
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Temperature Coef (ppm/Cel): 100;
M63M502KB40T607
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Series: 63;
M63M502KB40T614
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Technology: CERMET;
M63M502KB40T640
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Height (Package): 4.83 mm;
M63M502KT20
M63M502KT20T607
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Packing Method: Tube;
M63M502KT20T614
POTENTIOMETER; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Construction: Trimmer;
M63M502KT20T640
M63M501KB30T607
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Angle Of Rotation: 270 deg;
M63M502KB30T607
Vishay Intertechnology's M63M502KB30T607 is a CERMET TRIMMER resistor with 10% tolerance, rated at 0.5W power dissipation. Featuring linear resistance law and 270° rotation angle, it is ideal for PCB mounting applications requiring precise resistance adjustments in temperatures ranging from -55°C to 125°C.
M63M503KB30T607
M63M502KB30
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Terminal Finish: Matte Tin (Sn);
M63M503KB30T614
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved