Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's 594D107X0016C2T is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and low Tan Delta of 0.08. Ideal for applications requiring high ripple current (1170mA) and compact SMT package design in electronics operating b/w -55°C to 125°C.
Median Price
$1.870
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.510
100+ parts
-
1k+ parts
10k+ parts
Arrow
$1.406
Chip1Stop
$1.770
RS Americas
$3.380
$3.130
$2.730
DigiKey
$4.000
$2.236
Element14
$4.730
$3.530
$2.720
TTI Europe
Verical
$1.970
$1.562
$1.464
Farnell
$1.710
$1.480
Vyrian
$1.188
NAC Semi
$2.270
Component Electronics Inc.
$3.850
$2.880
$2.500
Sensible Micro Corp
Pegasus Components GmbH
Chip Stock
VNN
Speed Components Ltd
Mil-Aero Solutions, Inc.
Semi Source
ComSIT Distribution GmbH
Prism Electronics
Bristol Electronics
Nova Conductors
Electronics Depot
EPE Components Inc.
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Corohmni
$0.450
Ampacity Inc.
$2.200
Allen Electronics Distributors
$2.970
Kepictronics
Perfect Parts
Eastek
GreenTree Electronics
Netroflash
Formix International (Excess)
Tantalum capacitors have high volumetric efficiency and excellent stability, making them a reliable choice for various applications.
Low tan delta indicates low dissipation factor, ensuring efficient energy storage and minimal power loss.
Low leakage current helps in maintaining steady performance and reliability of the capacitor.
High ripple current rating allows for reliable operation in applications where fluctuating currents are present.
Suitable capacitance value for various filtering and decoupling applications in electronic circuits.
A suitable voltage rating for use in low to moderate voltage applications, providing adequate safety margin.
Low ESR value indicates high efficiency and stability of the capacitor in filtering and energy storage applications.
Surface mount capability allows for easy and efficient installation on PCBs, saving space and facilitating automated assembly processes.
Fixed Capacitors 594D107X0016C2T attributes and parameters. Explore more Fixed Capacitors devices from Vishay Intertechnology
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
594D107X0016C2T Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
PCN Packaging - MSID Label 20/Dec/2018
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
EU2B-YS3203C
Idec
ROTARY SWITCH;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Bkc Semiconductors
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
12065C104KAT2A
KYOCERA AVX
12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.
EEEFT1H221AP
Panasonic
Panasonic EEEFT1H221AP is a 220uF aluminum electrolytic capacitor with 50V URdc. It features tan delta of 0.1, leakage current of 0.11mA, and ripple current of 435.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0603C102K5RACAUTO
KEMET Corporation
C0603C102K5RACAUTO by KEMET is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 standard compliance and 50V rated DC voltage. With SMT package style and compact dimensions of 1.6mm x 0.8mm x 0.8mm, it is suitable for surface mounting in tight spaces.
M39006/30-0038
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10C220JB8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10C220JB8NNNC is a ceramic capacitor with 0.000022 uF capacitance and 50V URdc. With C0G temp characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in a compact form factor.
C0805C222F5GACTU
The KEMET Corporation C0805C222F5GACTU is a ceramic capacitor with 0.0022 uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With SMT package style and wraparound terminals, it is ideal for compact surface mount designs in various electronic devices.
C1608X7R1E104K080AA
TDK
The TDK C1608X7R1E104K080AA is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 25V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CL10C120JB8NNNC
CL10C120JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.000012 uF and rated DC voltage of 50V. It has negative tolerance of 5% and temperature coefficient of 30ppm/°C, suitable for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125 °C.
C2012X7R1V475K125AC
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
ECA1CHG102B
ECA1CHG102B by Panasonic is a 1000uF aluminum electrolytic capacitor with 16V rated DC voltage. It features tan delta of 0.20, leakage current of 0.16mA, and ripple current of 560mA, making it ideal for automotive applications meeting AEC-Q200 standard.
CL21B106KOQNNNE
Samsung Electro-mechanics CL21B106KOQNNNE is an 0805 SMT ceramic capacitor with 10uF capacitance and 16V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact surface mount package.
C0402C104K4RAC7411
KEMET C0402C104K4RAC7411 is a ceramic capacitor with 0.1uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55°C to 125°C.
GMJ316BB7106KLHT
Taiyo Yuden
Taiyo Yuden GMJ316BB7106KLHT is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2mm x 1.6mm x 1.6mm dimensions.
GRM155R61E105KA12D
Murata Manufacturing
Murata Manufacturing's GRM155R61E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/22-0350
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/25-0248
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
08055C104K4T2A
08055C104K4T2A by KYOCERA AVX is an 0805 SMT ceramic capacitor with 0.1uF capacitance, 10% tolerance, X7R temperature characteristics. It operates b/w -55 to 125 °C and is ideal for automotive applications meeting AEC-Q200 standard.
GCM21BR72A104KA37L
Murata Manufacturing's GCM21BR72A104KA37L is a ceramic capacitor with capacitance of 0.1uF, rated at 100V DC. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL10B104KB8NNND
CL10B104KB8NNND by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high reliability and compact size.
C0805C104K5RAC7210
KEMET C0805C104K5RAC7210 is a ceramic capacitor with 10% tolerance, X7R temperature characteristics, and 0.1uF capacitance. Ideal for surface mount applications in electronics due to its compact size (2x1.25x.78mm) and 50V rated DC voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
594D156X0050R2T
Vishay Intertechnology
Vishay Intertechnology's 594D156X0050R2T is a TANTALUM CAPACITOR with 15uF capacitance, 50V URdc, and 0.06 Tan Delta. Ideal for applications requiring high ripple current (850mA) and low leakage current (0.0075mA), such as power supplies and filtering circuits in electronics.
594D107X0025R2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D686X0025R2T
Vishay Intertechnology's 594D686X0025R2T is a TANTALUM CAPACITOR with a capacitance of 68 uF and rated DC voltage of 25 V. It has a low Tan Delta of 0.06, leakage current of 0.017 mA, and high ripple current capability of 1620 mA. This rectangular package capacitor is suitable for surface mount applications in various electronic devices.
594D475X9050C2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D107X0016D2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D476X9020D2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D107X9016C2T
Vishay Intertechnology's 594D107X9016C2T is a TANTALUM CAPACITOR with 100uF capacitance, 16V URdc, and low ESR of 80mohm. Ideal for applications requiring high ripple current (1170mA) and low leakage current (0.016mA), such as power supplies and filtering circuits in electronics.
594D127X0020R2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D476X9016C2T
Vishay Intertechnology 594D476X9016C2T is a TANTALUM CAPACITOR with 47uF capacitance, 16V URdc, and 0.06 Tan Delta. Ideal for applications requiring high ripple current (1000mA) in compact SMT designs with -55 to 125 °C operating temperature range.
594D107X06R3B2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D105X0050B2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D337X0010R2T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D476X0020D2T
594D107X0010C4T
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
594D107X0010C8T
594D107X0016C4W
594D107X0016C8T
594D107X0016C8W
594D107X0016D4W
594D107X0016D8W
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved