Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Maximum Operating Temperature: 155 Cel;
Median Price
$9.695
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Farnell
1+ parts
$8.280
100+ parts
$6.660
1k+ parts
-
10k+ parts
Mouser Electronics
$9.630
$7.210
$6.430
$6.380
DigiKey
$9.760
$6.891
$5.765
Element14
$14.080
$11.220
Vyrian
Nova Conductors
Modulus Dynamics
$0.196
Aztec Data Supply Inc.
$0.595
Corohmni
$0.881
Continental Prestige Electronics
$9.520
$5.510
AZTECH Wire
$12.848
Ampacity Inc.
$15.150
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Authorized Procurement Solutions
Aranea Global
Perfect Parts
Fixed Inductors IHTH1125MZEB330M5A attributes and parameters. Explore more Fixed Inductors devices from Vishay Draloric
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Manufacturer Series:
Package Shape:
Shielded:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
IHTH1125MZEB330M5A Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
VISHAY DRALORIC In 1900 in Germany, Mr. Philip Rosenthal, as a sideline to his established business of porcelain tableware, started to manufacture ceramics for electronic applications. Starting in 1910, these were also made in Selb, Germany. In 1936 this electronic ceramics activity was separated from Rosenthal AG and made part of a joint venture with AEG named Rosenthal Isolatoren GmbH, or "RIG". The RIG name lasted until 1974, when AEG took over all of RIG and renamed it "CRL" because of its portfolio of passive components. The name was changed again in 1974 to Draloric Electronic GmbH. With the acquisition of Draloric Electronic GmbH by the electronics division of Corning Glass Works in 1981, the name was changed to Corning-Draloric, which lasted until its acquisition by Vishay Intertechnology in 1987. Vishay Draloric is a leading brand for MELF resistors and ceramic capacitor products. The Vishay Draloric product portfolio also includes thin film flat chip resistors, leaded film and wirewound resistors, and large ceramic power capacitors.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
American Power Devices
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
636CY-220M=P3
Toko
636CY-220M=P3 by Toko is a shielded, surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 22uH and max rated current of 0.9A, suitable for DC-DC converter applications due to its general purpose design and ferrite core material.
B82793-S513-N201
TDK
The TDK B82793-S513-N201 is a surface mount fixed inductor with 51uH nominal inductance and 0.8A max rated current. It is a general-purpose filter choke suitable for various applications, featuring dual in-line terminal placement and a compact rectangular package measuring 7.1mm x 6mm x 4.9mm.
SRU5016-100Y
Bourns
Bourns SRU5016-100Y is a shielded SMT inductor with 10uH nominal inductance, 0.084 ohm DC resistance, and 1A max rated current. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 40MHz.
DR74-101-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
DFE252012P-1R0M=P2
Murata Manufacturing
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
LQM21NN4R7K10L
Murata Manufacturing's LQM21NN4R7K10L is an 0805 SMT inductor with 4.7uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, self-resonance frequency of 47MHz, and ferrite core material. Ideal for general purpose use with a Q factor of at least 45 at the test frequency of 10MHz.
ARA00499
Tdk-lambda
GENERAL PURPOSE INDUCTOR; No. of Terminals: 4; Package Style (Meter): PCB Mount; Shielded: NO; Surface Mount: NO; Package Height: 29 mm;
IHLP5050FDER3R3M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Core Material: COMPOSITE;
DRA124-1R0-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 165 Cel;
DR73-151-R
LQW15AN3N6B8ZD
Murata Manufacturing's LQW15AN3N6B8ZD is a fixed inductor with 0402 size, 0.0036 uH nominal inductance, and 1.95 A max rated current. Ideal for RF applications, it features dual-ended terminals and operates b/w -55 to 125 °C with a Q factor of at least 30 at 250 MHz.
33466
Vishay Intertechnology
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; DC Resistance: .0108 ohm; Terminal Placement: RADIAL;
DR125-330-R
Eaton Corporation
Eaton Corporation's DR125-330-R is a shielded, surface mount fixed inductor with 33uH nominal inductance. It has a max rated current of 3.28A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors. The dual-ended terminal placement and ferrite core construction ensure efficient performance in compact rectangular package measuring 12.5mm x 12.5mm x 6mm.
SRP1038A-470M
Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.
74438356022HT
Wuerth Elektronik & Kg
74438356022HT by Wurth Elektronik is a shielded, dual-ended fixed inductor with a nominal inductance of 2.2uH and max rated current of 4.5A. Ideal for power applications, this SMT inductor has a self-resonance frequency of 30MHz and operates b/w -55°C to 150°C.
32860
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL; Maximum Rated Current: 56.3 A;
BDCD002016101R0MS1
Chilisin Electronics
IHLP5050FDER5R6M01
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; JESD-609 Code: e3;
CKS2125100M-T
Taiyo Yuden
CKS2125100M-T by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 85°C and a self-resonance frequency of 24MHz. This surface-mount component features dual-ended terminals and wraparound terminal shape.
SRR1210-470M
Bourns SRR1210-470M is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 3.8A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 4.5MHz and DC resistance of 0.072 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IHTH1125MZEB100M5A
Vishay Draloric
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Maximum Rated Current: 32 A;
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: YES; Surface Mount: NO;
IHTH1125KZEBR47M5A
IHTH1125MZEB330M5A
IHTH0750JZEB2R2M5A
IHTH1125MZEB1R0M5A
IHTH1125MZEB220M5A
IHTH1125MZEB470M5A
IHTH1125MZEB680M5A
IHTH1125MZEB6R8M5A
IHTH1125MZEBR47M5A
IHTH1125MZEB101M5A
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; No. of Functions: 1;
IHTH1125MZEB8R2M5A
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Terminal Shape: WIRE;
IHTH1125MZEB100M10
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Maximum Rated Current: 28 A;
IHTH1125MZEB220M10
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; DC Resistance: .00525 ohm;
IHTH1125MZEB220M40
IHTH1125MZEB2R2M40
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Nominal Inductance (L): 2.2 uH;
IHTH1125MZEB4R7M40
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: NO; Nominal Inductance (L): 4.7 uH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved