Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC IC OUTPUT OPTOCOUPLER; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED; Maximum Forward Current: .02 A; Maximum On State Current: .06 A; Configuration: SEPARATE, 2 CHANNELS; Maximum Operating Temperature: 70 Cel;
Median Price
$3.750
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Zilex Electronics Inc.
Bristol Electronics
Atlantic Semiconductor
Digiode
Aztec Data Supply Inc.
$0.171
Continental Prestige Electronics
$3.675
Argo Parts USA
Netroflash
$3.562
$3.488
Corohmni
$4.000
Advanced Electronics
$4.120
$3.914
AZTECH Wire
$12.208
Decca Corp
$17.000
$16.660
$16.493
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Metaverse IC Inc.
Corphita
Optocoupler Circuit Outputs HCPL-0731#500 attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Vicor
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Supply Voltage:
HCPL-0731#500 Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Device Design Changes 10/Nov/2015 Molding Chg 08/Feb/2016
PCN Packaging - Multiple Devices Marking/Labeling 07/Aug/2013 Marking/Labeling Revision B 14/Jan/2014
Vicor is the leader in high-performance power modules, enabling customer innovation with easy-to-deploy modular power system solutions for power delivery networks that provide the highest density and efficiency from source to point-of-load. We continuously advance the density, efficiency and power delivery capabilities of our power modules by staying on the forefront of distribution architectures, conversion topologies and packaging technology. Vicor serves customers in enterprise and high-performance computing, industrial equipment and automation, robotics, UAVs, vehicles and transportation, satellites, and aerospace and defense.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
HCPL-5231
Broadcom
Broadcom's HCPL-5231 optocoupler features 2 functions, 1500V isolation voltage, and 5MBps data rate. Ideal for logic IC output applications with a max forward current of 0.008A and operating temperature range from -55 to 125°C.
6N136M-V
Lite-on Technology
6N136M-V by Lite-on Technology is a single optocoupler with a max forward current of 0.025A and isolation voltage of 2500V. It operates b/w -55°C to 100°C, making it suitable for logic IC output applications requiring high isolation and low on-state current of 0.008A.
TLP2745(TP,E
Toshiba
Toshiba's TLP2745(TP,E optocoupler features a max forward current of 0.015A, isolation voltage of 5000V, and response time of 3ns. Ideal for logic IC output applications with a min supply voltage of 4.5V and operating temperatures ranging from -40°C to 110°C.
6N137M
6N137M by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp up to 100°C, and isolation voltage of 5000V. Ideal for logic IC output applications due to its fast response time of 40ns and data rate of 10MBps.
HCPL-2531-500E
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: TTL COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Minimum Operating Temperature: 0 Cel; Maximum Forward Current: .025 A; No. of Elements: 2;
6N140A/883B#300
The Broadcom 6N140A/883B#300 is a complex optocoupler with 4 functions, featuring a min current transfer ratio of 200%. It operates at temperatures from -55 to 125 °C and offers an isolation voltage of 1500V. Ideal for logic IC output applications, this device has a max response time of 0.00006s and a data rate of 0.1 MBps.
HCPL0637
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .015 A; Configuration: SEPARATE, 2 CHANNELS; Nominal Response Time: 100 ns;
6N136-V
Lite-on Technology's 6N136-V is a single optocoupler with max forward current of 0.025A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -55°C to 100°C with max on-state current of 0.008A.
HCPL-2730SD
HCPL-2730SD by Onsemi is a 2-channel logic IC output optocoupler with separate configuration. It offers a min current transfer ratio of 300%, max isolation voltage of 2500V, and operates b/w -40 to 85°C. Ideal for applications requiring surface mounting feature and high forward current capability up to 0.06A.
HCPL-063L500
Broadcom's HCPL-063L500 is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.015A, isolation voltage of 3750V, and data rate of 15MBps. Ideal for logic IC output applications, it operates b/w -40 to 85°C temperatures and features surface mounting.
HCNW2611-500E
Broadcom's HCNW2611-500E is a SINGLE optocoupler with 3750V isolation voltage, 100ns response time, and 10MBps data rate. Ideal for logic IC output applications, it operates b/w -40 to 85°C with a max forward current of 0.02A.
TLP351F
Toshiba's TLP351F is a single optocoupler with max. forward current of 0.005A, ideal for logic IC outputs. With a min. supply voltage of 10V and max. isolation voltage of 3750V, it operates b/w -40°C to 100°C making it suitable for various applications requiring fast response times at nominal voltage of 30V.
TLP250HF
Toshiba TLP250HF is a single optocoupler with max. forward current of 0.02A, ideal for logic IC output applications. With a response time of 50ns and isolation voltage of 3750V, it operates b/w -40 to 125°C temperatures. Suitable for through-hole mounting with a min supply voltage of 10V.
HCPL-2731
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 2500 V; Minimum Supply Voltage: 4.5 V; Additional Features: UL RECOGNIZED; CMOS COMPATIBLE;
6N137SVM
6N137SVM by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 5000V, and response time of 40ns. Ideal for logic IC output applications due to its high data rate of 10MBps and surface mounting feature.
HCPL-2601-000E
HCPL-2601-000E by Broadcom is a single optocoupler with a max forward current of 0.02A and isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 20ns, and supports data rates up to 10MBps. Ideal for logic IC output applications requiring reliable signal transmission in harsh environments.
HCPL-063A-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .01 A; Nominal Supply Voltage: 5.5 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
6N139M
6N139M by Onsemi is a single optocoupler with max forward current of 0.02A and min transfer ratio of 400%. Operating b/w -40 to 100°C, it has a max isolation voltage of 5000V. Ideal for logic IC output applications due to its through hole mount feature.
5962-8978501PA
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .05 W; JESD-609 Code: e0; No. of Elements: 2;
FOD8320R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .025 A; Maximum Response Time: .0000005 s;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-316J-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
HCPL2630S
HCPL2630S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A, operating temperature range of -40 to 85°C, and isolation voltage of 2500V. Ideal for logic IC output applications requiring fast response time at 10MBps data rate.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Maximum Power Dissipation: .06 W; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5 V;
HCPL-2630.S
HCPL-2630.S by Qt Optoelectronics is a 2-channel logic IC output optocoupler with separate configuration. It features max. forward current of 0.03A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in environments ranging from -40°C to 85°C.
HCPL-316J-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Response Time: 500 ns; Nominal Supply Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631.SD
HCPL-2631.SD by Qt Optoelectronics is a 2-channel optocoupler with max. forward current of 0.03A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a nominal data rate of 10MBps.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.5 V; No. of Elements: 2;
HCPL2601V
HCPL2601V by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates b/w -40 to 85°C, has a response time of 75ns, and is ideal for logic IC output applications.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 2500 V;
HCPL2630SV
HCPL2630SV by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A and operates at temperatures b/w -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 2500V and data rate of 10MBps in a surface mount package.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
HCPL-0600-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
Broadcom's HCPL-0600-500E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 100ns. Ideal for applications requiring high-speed data transmission in environments with temperatures ranging from -40 to 85°C.
HCPL-2601S
Fairchild Semiconductor's HCPL-2601S is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and data rate of 10MBps. It is ideal for logic IC output applications, operating b/w -40°C to 85°C with a min. supply voltage of 4.5V.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-2601.S
HCPL-2601.S by Qt Optoelectronics is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. With a data rate of 10MBps, it is ideal for logic IC output applications requiring reliable signal transmission in temperatures ranging from -40°C to 85°C.
HCPL-0201-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 20 V; Nominal Response Time: 300 ns; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .01 A;
Broadcom's HCPL-0201-500E is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. With a data rate of 5MBps, it operates b/w -40 to 85°C, making it ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
Vicor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved