Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; Shell Finish: NICKEL; Minimum Operating Temperature: -65 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Other Function RF Connectors BJ459ACWP-216 attributes and parameters. Explore more Other Function RF Connectors devices from Vertiv
Body Depth:
Body or Shell Style:
Contact Gender:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
BJ459ACWP-216 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
World’s Leading Critical Digital Infrastructure Provider Today’s networks have become more distributed and more complex, making availability and connectivity symbiotic. You can’t have one without the other. Vertiv connects and protects your network with core-to-edge solutions and expertise that is unmatched anywhere in the world
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
29976BM-2-006
Huber+suhner Ag
29976BM-2-006 by Huber+suhner Ag is a threaded RF connector with gold-plated contacts, suitable for board and panel mounting. With an insertion loss of 0.373 dB and VSWR of 1.3, it operates at temperatures ranging from -65 to 165°C. This plug-type connector has a max frequency of 65 GHz, making it ideal for high-frequency applications.
3232
Pomona Electronics
3232 by Pomona Electronics is an RF connector with gold termination and mating contact finish. Featuring bayonet coupling, it has a characteristic impedance of 50 ohm and solder termination type. Ideal for applications requiring high-quality female-female-female connectors in RF systems.
FFA.00.250.CTAC31
Lemo Usa
FFA.00.250.CTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz operating frequency. Ideal for cable mounting applications requiring a male plug with solder termination in straight mounting style.
2391
Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.
FAA.1D.694.CNL
FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.
PL155-47
Vertiv
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;
PL3455ACS-303
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE; Body Depth: 1.45 inch; Body or Shell Style: PLUG;
128-0711-201
Cinch Connectivity Solutions
128-0711-201 RF connector by Cinch Connectivity Solutions features a gold termination finish, SNAP coupling type, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as surface mount boards needing reliable female receptacle connectors.
MS-147(01)
Hirose Electric
The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.
1211-40003
Sv Microwave
The SV Microwave 1211-40003 RF SMP Connector features a body diameter of 0.165", insertion loss of 0.154 dB, and dielectric withstanding voltage of 700VAC. Ideal for applications requiring a characteristic impedance of 50 ohm, such as high-frequency communication systems operating up to 26.5 GHz.
619401-1
TE Connectivity
TE Connectivity 619401-1 RF Connector features SNAP coupling, PCT-POLYESTER insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max operating frequency of 5 GHz.
MS-156C3(20)
RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
1056724-1
TE Connectivity's 1056724-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring high-frequency signal transmission in harsh environments.
3202-6000
3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.
PKG.1B.303.CLLD72
PKG.1B.303.CLLD72 by Lemo Usa is a panel mount RF F connector with snap coupling, suitable for cable and panel mounting. It features a polyetheretherketone insulator material, solder termination, and female contact gender. Ideal for applications requiring a straight socket body style in the Other Function RF Connectors category.
11_QMA-50-2-1/133_NH
11_QMA-50-2-1/133_NH by Huber+suhner Ag is a RF CONNECTOR with SNAP coupling, suitable for cables with 0.413" diameter. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it's ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C.
U.FL-R-SMT-1(40)
U.FL-R-SMT-1(40) by Hirose Electric is a 50 ohm RF connector with 0.05 dB insertion loss, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 200VAC and insulation resistance of 500MΩ, it is ideal for board mounting in commercial settings. With a durability of 30 cycles and surface mount termination, this connector offers reliable performance in various electronic devices.
59S2AQ-40MT5-Z_1
Rosenberger Hochfrequenztechnik & Kg
59S2AQ-40MT5-Z_1 RF connector by Rosenberger features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for commercial applications, this right-angle plug connector offers high durability with 25 cycles and a wide temperature range from -40 to 105°C.
19S102-40ML5
19S102-40ML5 RF SMP connector by Rosenberger features 0.63 dB insertion loss, 1.5 VSWR, and operates up to 40 GHz. With MIL conformity, GOLD finish, and SNAP coupling, it is ideal for high-frequency applications requiring a characteristic impedance of 50 ohm.
SF1621-60048-1S
SF1621-60048-1S by Sv Microwave is a threaded RF connector with 50 ohm impedance, suitable for panel mount applications. Featuring polyetherimide insulator and stainless steel shell, it operates b/w -65 to 165 °C at frequencies up to 50 GHz. Ideal for board and panel mounting, this female jack connector has a 0.357" body depth.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved