Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Switching Regulators & Controllers TL1451G-S16-R attributes and parameters. Explore more Switching Regulators & Controllers devices from Unisonic Technologies
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TL1451G-S16-R Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Unisonic Technologies Company Limited was set up in 1990, and it is the manufacturing supplier for high-tech semiconductor devices and IC design, and its products are mainly of Power Management, and Audio Power Amplifier IC, supplemented with Motor Controller, OP, and TR. These components are primarily used in the market of PC, telecom, and consumer products, and they are sold throughout Asian area, while the company also owns direct branch in South Korea, Thailand, and India. The difference to develop a completely diverse service model from that of previous one in OEM/OEM lies on the fact that IDM would resort to more aggressive manner of approach, and one would have to fully master its independent competence in every critical point from the research and development, design, manufacturing, packaging, testing, and to the marketing of brand name. As such, it would achieve the advantage of productivity security and technical independence, which is different from the commissioned OEM model of domestic vendor supplier and would fully demonstrate its competitiveness.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SS14
Rfe International
Gulf Semiconductor
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micro Commercial Components
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Loras Industries
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
TPS62410DRCRG4
Texas Instruments
TPS62410DRCRG4 by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
TPS63030DSKR
TPS63030DSKR by Texas Instruments is a switching regulator with a max output voltage of 5.5V and max output current of 0.4A, suitable for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact square package style measuring 2.5mm x 2.5mm x 0.8mm.
TPS40210DGQR
TPS40210DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output current up to 0.4A. It is ideal for automotive applications due to its compact size (3x3mm), pulse width modulation control technique, and buck-boost switcher configuration.
MC34063ACD-TR
STMicroelectronics
MC34063ACD-TR by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current, operating at 100kHz frequency. It has a boost configuration and supports input voltages from 3V to 40V, making it ideal for commercial applications requiring efficient power conversion in a compact package.
L5970D013TR
L5970D013TR by STMicroelectronics is a voltage-mode switching regulator with a max output current of 2.25A and a max switching frequency of 280kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and features pulse frequency modulation control technique.
TPS63002DRCR
TPS63002DRCR by Texas Instruments is a switching regulator with a max output current of 2A and a max switching frequency of 1500kHz. It is commonly used in industrial applications for voltage conversion and control.
ST1S10PHR
ST1S10PHR by STMicroelectronics is a switching regulator with max output current of 3A and max switching frequency of 1100kHz. It operates in buck configuration, supports pulse width modulation control technique, and has a small outline package style. Ideal for applications requiring efficient voltage regulation in compact spaces.
TPS54308DDCR
TPS54308DDCR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 350kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact thin profile package design.
LT8608EMSE#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
AOZ1282CI-1
Alpha & Omega Semiconductor
AOZ1282CI-1 by Alpha & Omega Semiconductor is a switching regulator with 6 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4.5V to 36V and output voltage up to 30.6V at a max current of 0.6A. Ideal for applications requiring low profile, high efficiency power management solutions.
L5970D
L5970D by STMicroelectronics is a MOS switching regulator with 2.25A output current and 280kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and uses pulse frequency modulation control technique.
TPS61040DBVR
TPS61040DBVR by Texas Instruments is a switching regulator with a max output current of 0.45A and a max output voltage of 28V. It operates in pulse frequency modulation control mode, suitable for industrial applications requiring boost switcher configuration. With a small outline package style and surface mount capability, it offers efficient power management solutions in compact designs.
LT1054CS8#PBF
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1616ES6#TRPBF
Analog Devices
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
LM5085MYE/NOPB
LM5085MYE/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 10A and a wide input voltage range from 4.5V to 75V. It operates in automotive-grade temperatures (-40°C to 125°C) and has a compact package style suitable for space-constrained applications. Ideal for buck converter configurations, this IC offers high efficiency with a max switching frequency of 1000kHz.
LM2596DSADJG
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
MC33063ADRE4
MC33063ADRE4 by Texas Instruments is a switching regulator with Vsup of 5V, Isup of 4mA, and output current of 1.5A. Ideal for industrial applications, it operates b/w -40 to 85°C and supports voltage-mode control technique in a compact rectangular package.
LM2596S-ADJ
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR23625CDDA
LMR23625CDDA by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
MAX17502FATB+T
Analog Devices' MAX17502FATB+T is a current-mode switching regulator with a max output current of 1.9A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a wide input voltage range of 4.5V to 60V, it is ideal for various power management needs in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Unisonic Technologies
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved