Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .47 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
Median Price
$0.034
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.033
100+ parts
-
1k+ parts
10k+ parts
$0.029
DigiKey
$0.170
$0.071
$0.049
$0.025
Chip1Stop
Verical
$0.030
Farnell
$0.028
$0.026
Element14
$0.056
$0.045
Newark
$0.053
$0.040
IBS Electronics
Authorized Procurement Solutions
Fusible Resistors FRN25JR47 attributes and parameters. Explore more Fusible Resistors devices from Tyco Electronics Components
Additional Features:
Fusing Time:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
FRN25JR47 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1554216004
Molex
WIRE AND CABLE;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Diodes Incorporated
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS-7-F
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRF250JT-73-10RYY
Vitrohm Portuguesa Lda
Vitrohm Portuguesa Lda's CRF250JT-73-10RYY is a 10 ohm fusible resistor with wire wound technology. It has a rated power dissipation of 2.5W, operating temperature range from -55 to 350 °C, and a tolerance of 5%. Ideal for applications requiring high resistance and temperature stability in through-hole mounting setups.
R252012
Littelfuse
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Shape (Package): TUBULAR PACKAGE; Packing Method: TR; Fusing Time: 14400 s; No. of Terminals: 2;
FW50A10R0JA
Bourns
Bourns FW50A10R0JA is a 10 ohm fusible resistor with 5% tolerance, rated for 5W power dissipation. With a temperature coefficient of 200 ppm/°C, it operates b/w -55 to 275 °C. Ideal for through-hole mounting applications requiring a reliable fixed resistor in tubular package design.
R252.250
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Rated Temperature: 125 Cel; Manufacturer Series: R252; Minimum Operating Temperature: -55 Cel; Additional Features: RATED CURRENT: 0.25A;
CRF200JT-52-100RUL
CRF200JT-52-100RUL by Vitrohm Portuguesa Lda is a 100 ohm fusible resistor with 5% tolerance, rated at 2W power dissipation. With wire wound technology and tubular package shape, it operates b/w -55 to 350 °C, making it ideal for applications requiring high temperature resistance.
FKN1WSJR-52-8R2
Yageo
Yageo's FKN1WSJR-52-8R2 is a fusible resistor with 8.2 ohm resistance, 1W power dissipation, and 155°C max operating temp. Ideal for applications requiring reliable overcurrent protection in circuits due to its fusing time of 60s and cylindrical package shape. Suitable for through-hole mounting with a diameter of 3.5mm and length of 9mm.
WWF2AJT200R
Stackpole Electronics
WWF2AJT200R by Stackpole Electronics is a fusible resistor with 200 ohm resistance, 3W power dissipation, and 1s fusing time. Ideal for applications requiring high-temperature operation up to 350°C, such as automotive electronics and industrial equipment. Features wire wound technology in a tubular construction with matte tin terminal finish.
NFR25H0002201JR500
Vishay Intertechnology
Vishay Intertechnology's NFR25H0002201JR500 is a fusible resistor with 2200 ohm resistance, 5% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for applications requiring high reliability in extreme temperature environments.
AC050000B4709J6BCS
Vishay Intertechnology's AC050000B4709J6BCS is a fusible resistor with 47 ohm resistance, 5% tolerance, and 5W power dissipation. It operates b/w -40 to 200 °C and has a temperature coefficient of 200 ppm/°C. Ideal for applications requiring high reliability in harsh environments.
FKN2WSJR-73-100R
Yageo's FKN2WSJR-73-100R is a fusible resistor with 100 ohm resistance, 5% tolerance, and 2W power dissipation. It operates b/w -40 to 155 °C and has a fusing time of 60s. Ideal for applications requiring reliable overcurrent protection in electronic circuits.
FW70A10R0JA
Bourns FW70A10R0JA is a 10 ohm fusible resistor with 5% tolerance, rated for 7W power dissipation. With a temperature coefficient of 200 ppm/°C, it operates b/w -55 to 275 °C. Ideal for through-hole mounting applications requiring high operating temperatures and protection against overloads.
R252005
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Rated Temperature: 125 Cel; Additional Features: RATED CURRENT: 5A; No. of Terminals: 2; Fusing Time: 14400 s;
SP3AJT10R0
SP3AJT10R0 by Stackpole Electronics is a fusible resistor with 10 ohm resistance, 5% tolerance, and 4W power dissipation. It operates b/w -55°C to 350°C making it suitable for high-temperature applications. With wire wound technology and matte tin finish, it is ideal for through-hole mounting in various electronic circuits.
WWF2AJT150R
WWF2AJT150R by Stackpole Electronics is a fusible resistor with 150 ohm resistance, 3W power dissipation, and 1s fusing time. It is ideal for applications requiring high operating temperatures up to 350°C, such as automotive electronics and industrial equipment. With wire wound technology and tubular construction, it offers reliable performance in harsh environments.
FRN25J100R
Tyco Electronics Components
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
FRN25JR22
TE Connectivity
TE Connectivity's FRN25JR22 is a fusible resistor with 0.22 ohm resistance, 5% tolerance, and 0.25 W power dissipation. It has a thin film technology, tubular package shape, and operates b/w -55 to 155 °C. Ideal for applications requiring precise resistance values in compact spaces.
FKN3WSJT-73-22R
The Yageo FKN3WSJT-73-22R is a 22 ohm fusible resistor with 3W power dissipation and 5% tolerance. It features wire wound technology, operates b/w -40 to 155°C, and has a fusing time of 60s. Ideal for applications requiring high operating temperatures and reliable overcurrent protection in through-hole mounting setups.
FSQ510RJ
TE Connectivity's FSQ510RJ is a 10 ohm wire wound fusible resistor with 5% tolerance and 5W power dissipation. Ideal for through hole mounting, it operates b/w -55°C to 275°C with a temperature coefficient of 300 ppm/°C.
NFR2500003308JR500
Vishay Intertechnology's NFR2500003308JR500 is a fusible resistor with 3.3 ohm resistance, 5% tolerance, and 0.33 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 200 ppm/°C. Ideal for applications requiring high reliability in extreme temperature environments.
AC03000007509JACCS
Vishay Intertechnology's AC03000007509JACCS is a fusible resistor with 75 ohm resistance, 3W power dissipation, and 15V operating voltage. It features wire wound technology, tubular construction, and axial package style. Ideal for applications requiring a rated temperature of -40 to 200 °C such as UL standard compliant circuits in electronics industry.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved