Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: MIL-R-83725;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Power & Signal Relays K43C732 attributes and parameters. Explore more Power & Signal Relays devices from Tyco Electronics Cii
Relay Type:
Relay Function:
Relay Action:
Coil/Input Supply Type:
Contact/Output Supply Type:
Contact Maximum AC Current:
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum DC Rating (R Load):
Coil Power:
Coil Resistance:
Coil Maximum DC Voltage:
Coil Maximum DC Coil Current:
Coil DC Operate Voltage:
Coil DC Release Voltage:
Mounting Type:
Activation Time:
Release Time:
Minimum Operating Temperature:
Maximum Operating Temperature:
Termination Type:
Industry Standard Compliance:
Manufacturer Series:
Additional Features:
K43C732 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.49.00.75
SB
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
1N4148W-T
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M83536/6-022M
Stpi Group
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Coil or Input Supply Type: DC; Reference Standard: MIL-PRF-83536;
1-1393239-3
TE Connectivity
TE Connectivity 1-1393239-3 is a SPDT power/signal relay with 8ms operate time. With 12A AC contact current and 24V coil voltage, it's ideal for panel mounting applications requiring momentary relay action. Measuring 29mm x 12.7mm x 15.7mm, this relay offers high dielectric strength and reliable performance in various electrical systems.
RTE24024
TE Connectivity RTE24024 is a DPDT relay with 2 FORM C, operate time of 10ms, and electrical life of 30k cycles. Ideal for AC/DC applications with max contact ratings of 8A@400VAC and coil voltage of 24V. Features include sealing RT3, MOMENTARY action, and compact size at 29mm x 12.7mm x 15.7mm for panel mounting in various electronic devices.
4-1618239-9
TE Connectivity 4-1618239-9 is a SPDT power/signal relay with 1 FORM C configuration and MOMENTARY action. It has a max AC contact current of 30A and DC contact voltage of 5V, suitable for applications requiring panel mounting and solder/quick connect termination.
APF30224
Panasonic
The Panasonic APF30224 is a SPDT power/signal relay with 8ms operate time and 50000 cycles electrical life. With waterproof sealing, it operates b/w -40 to 85°C, suitable for AC applications up to 6A@250VAC. Ideal for through-hole mounting in various electronic devices.
G5V-2-H1DC24
Omron
Omron G5V-2-H1DC24 is a DPDT power/signal relay with 7ms operate time and 100000 cycles electrical life. Ideal for AC/DC applications, it has a max contact rating of 1A@125VAC/125VDC and operates at temperatures ranging from -25°C to 70°C.
1462037-1
TE Connectivity's 1462037-1 is a DPDT power/signal relay with 2 FORM C configuration, ideal for AC/DC applications. With an operate time of 8ms and electrical life of 100k cycles, it offers reliable performance. Featuring hermetically sealed construction and gold plating on end contacts, this relay ensures high insulation resistance and contact reliability.
40.52.9.024.0000
Finder
Finder's 40.52.9.024.0000 DPDT power/signal relay has a 7ms operate time and 100,000 electrical life cycles. With a max AC contact current of 15A@400VAC, it is ideal for applications requiring momentary relay action in temperatures ranging from -40 to 85°C.
M83536/15-020M
2-1419130-4
TE Connectivity 2-1419130-4 is a SPDT power/signal relay with 1 FORM C form. Operate time of 5ms, insulation resistance of 1TΩ, and sealing rating of RT3. Ideal for applications requiring momentary relay action in AC/DC circuits up to 120V/1A.
FTR-K1CK005W
Fujitsu
Fujitsu FTR-K1CK005W is a SPDT power/signal relay with 15ms operate time and 30000 cycles electrical life. It has a max AC contact current of 16A@250VAC, making it suitable for applications requiring momentary relay action in temperatures ranging from -40°C to 85°C. With a compact size of 29mm x 12.7mm x 15.7mm, it is ideal for use in various electronic devices that require reliable switching capabilities.
T92S11D12-48
TE Connectivity's T92S11D12-48 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 25ms, has an electrical life of 100k cycles, and insulation resistance of 1G ohm. With a max AC contact current of 30A@277VAC, it is ideal for applications requiring momentary relay action in sealed environments.
RT174005
TE Connectivity's RT174005 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 11ms, has a body width of 12.7mm, and can handle up to 10A@250VAC. Ideal for applications requiring momentary relay action in AC supply circuits.
1649329-1
TE Connectivity 1649329-1 is a DPDT relay with 2 FORM C, suitable for power/signal applications. It operates b/w -40 to 85°C, with coil voltage of 3.5V DC and contact current up to 8A AC/DC. Featuring SILVER NICKEL contacts, it meets UL and VDE standards for reliable performance in various industries.
4-1415540-4
TE Connectivity 4-1415540-4 is a SPDT power/signal relay with 1 FORM C form factor. It has a max AC contact current of 16A@400VAC and coil resistance of 32500 ohm. Ideal for applications requiring momentary relay action, such as panel mounting in industrial settings.
3-1618406-0
TE Connectivity 3-1618406-0 is a SPST-NO-DM power/signal relay with 100A AC contact current and 600V DC contact voltage. Featuring a coil resistance of 56 ohm, it is ideal for panel mounting applications requiring a reliable DC power supply termination via solder/quick connect.
41.52.9.024.0010
Finder 41.52.9.024.0010 is a DPDT power/signal relay with 2 FORM C configuration, suitable for AC/DC applications. Operates at 5ms with 60000 cycles lifespan, featuring 15A@400VAC contact rating and 24V coil voltage for diverse industrial uses.
M39016/6-109L
Leach International
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: MIL-PRF-39016/6;
TE Connectivity's M83536/15-020M is a 4PDT-CO power/signal relay with 16ms operate time. It has a max contact AC rating of 4A@120VAC and electrical life of 100,000 cycles. Ideal for applications requiring momentary relay action in harsh environments due to its hermetically sealed design.
G6RN-1ADC24
Omron G6RN-1ADC24 is a SPST power/signal relay with 6ms operate time and 100000 cycles electrical life. It has max AC contact current of 8A@250VAC, suitable for applications requiring momentary relay action in temperatures ranging from -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Tyco Electronics Cii
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved