Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; SEMKO; TUV; UL;
Median Price
$1.756
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$0.670
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$1.132
$0.958
$0.893
Mouser Electronics
$1.830
$1.400
$1.130
$1.060
DigiKey
$1.940
$1.460
Master Electronics
$1.683
$1.031
$0.965
Verical
$2.054
$1.430
$1.378
Nova Conductors
$1.076
Chip Stock
VNN
Electro Sonic
$1.630
$1.140
Vyrian
Semicontronic
$0.570
$0.556
$0.553
Aranea Global
$1.054
$1.012
Continental Prestige Electronics
$1.071
$1.050
Argo Parts USA
Advanced Electronics
$1.248
$1.148
Aztec Data Supply Inc.
$3.570
Perfect Parts
Assy Fe
Robosynatics
Lucentia Tech
Power & Signal Relays 9-1419125-9 attributes and parameters. Explore more Power & Signal Relays devices from Tyco Electronics Cii
Relay Type:
Relay Function:
Relay Action:
Coil/Input Supply Type:
Contact/Output Supply Type:
Contact Maximum AC Current:
Contact Maximum AC Voltage:
Contact Maximum DC Current:
Contact Maximum AC Rating (R Load):
Contact Maximum DC Voltage:
Contact Maximum DC Rating (R Load):
Coil Power:
Coil Resistance:
Coil Maximum DC Voltage:
Coil Maximum DC Coil Current:
Coil DC Operate Voltage:
Coil DC Release Voltage:
Height:
Length/Diameter:
Width:
Dimensions:
Mounting Type:
Packing Method:
Activation Time:
Release Time:
Minimum Operating Temperature:
Maximum Operating Temperature:
Termination Type:
Industry Standard Compliance:
Sealing Type:
Lifespan:
Manufacturer Series:
9-1419125-9 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.41.00.20
SB
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bourns
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Grande Electronics
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Bytesonic Electronics
T92P7D22-24
TE Connectivity
TE Connectivity's T92P7D22-24 is a power/signal relay with SPST-NO function and 2 FORM A form. It has an operate time of 25 ms and can handle a max AC contact current of 30A@277VAC. This relay is commonly used in applications requiring momentary relay action, such as control systems or industrial automation.
7-1393236-4
TE Connectivity 7-1393236-4 is a 1 FORM C power/signal relay with 5" width, operating b/w 70-85°C. It has a max AC contact current of 6A and DC contact current of 6A, suitable for panel mounting applications.
RT114024F
Tyco Electronics Elcon
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
RT424005F
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
9-1440003-3
Tyco Electronics Cii
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE;
9-1440003-0
TE Connectivity 9-1440003-0 is a SPDT power/signal relay with 1 FORM C form factor. It operates at 10ms, has a max temp of 85°C, and can handle up to 5A@277VAC. Ideal for applications requiring momentary relay action in various industries.
EE2-24NUH-L
World Products
POWER/SIGNAL RELAY; Mounting Feature: SURFACE MOUNT-STRAIGHT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
2-1393243-1
TE Connectivity 2-1393243-1 is a DPDT power/signal relay with 2 FORM C configuration. It has an operate time of 10ms and electrical life of 30,000 cycles. With a max AC contact current of 8A@400VAC, it is ideal for applications requiring momentary relay action in various industries.
G2RL-1A4-E-CF-DC24
Omron
Omron G2RL-1A4-E-CF-DC24 is a SPST power/signal relay with 7ms operate time and 30000 cycles electrical life. It has a max AC contact current of 16A@250VAC, making it suitable for applications requiring momentary relay action in temperatures ranging from -40 to 85°C.
1-1649329-5
TE Connectivity 1-1649329-5 is a DPDT relay with 2 FORM C, operate time of 8ms, and max AC contact current of 8A. Ideal for power applications requiring momentary relay action, it has a compact body size of 29mm x 12.7mm x 15.7mm and can handle up to 400VAC voltage.
APF30224
The Panasonic APF30224 is a SPDT power/signal relay with 8ms operate time and 50000 cycles electrical life. With waterproof sealing, it operates b/w -40 to 85°C, suitable for AC applications up to 6A@250VAC. Ideal for through-hole mounting in various electronic devices.
6-1393234-8
TE Connectivity 6-1393234-8 is a DPDT power/signal relay with 12ms operate time and 2000000 cycle electrical life. It has a max AC contact current of 8A@440VAC, suitable for applications requiring momentary relay action in industrial equipment and control systems.
RT314F12
TE Connectivity's RT314F12 is a 1 FORM C SPDT power/signal relay with 8ms operate time and 6000 cycles electrical life. With latched relay action, it has a max AC contact current of 16A@400VAC. Ideal for applications requiring reliable switching control in industrial settings.
M83536/10-023M
First Switchtech
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: MIL-PRF-83536;
EE2-3TNUH-L
KEMET Corporation
The KEMET Corporation's EE2-3TNUH-L is a DPDT power/signal relay with 2 FORM C configuration. It operates at 3V, has a coil resistance of 64.3 ohm, and can handle up to 60W@220VDC. Ideal for AC/DC applications in industries requiring reliable switching control within a temperature range of -40°C to 85°C.
T9A-P5D52-12
TE Connectivity's T9A-P5D52-12 is a SPDT power/signal relay with 15ms operate time and 100000 cycle electrical life. With 20A max AC/DC contact current, it is ideal for applications requiring momentary relay action in dust-proof environments.
9-1415536-4
The TE Connectivity 9-1415536-4 is a 3PDT power/signal relay with 3 FORM C configuration. It operates at temperatures from -40 to 70°C, with max AC contact current of 10A and DC coil voltage of 24V. Ideal for applications requiring momentary relay action in AC/DC circuits, featuring silver nickel end contacts and UL/VDE standards compliance.
RY611005
POWER/SIGNAL RELAY; Mounting Feature: SOCKET MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
UB2-12NUN-L
Tokin
POWER/SIGNAL RELAY; Mounting Feature: SURFACE MOUNT-STRAIGHT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; EN; IEC; TUV; UL;
EE2-5NU
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
9-1419125-9
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; SEMKO; TUV; UL;
9-1419125-7
TE Connectivity's 9-1419125-7 is a SPST power/signal relay with 1 FORM A configuration. It has an operate time of 15 ms and electrical life of 100,000 cycles. This relay is commonly used in applications requiring momentary relay action, with a max AC contact current of 10A@250VAC and max DC coil voltage of 12V.
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 3PDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
9-1419111-3
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
9-1415039-1
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 3PDT; Coil or Input Supply Type: AC; Reference Standard: UL; VDE;
9-1419128-8
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL;
9-1419111-6
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Coil or Input Supply Type: AC; Reference Standard: UL; VDE;
9-1415075-1
9-1415546-2
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Function: SPST-NO; Coil or Input Supply Type: DC; Maximum DC Coil Voltage: 24 V; Dielectric Strength Between Open Contacts: 1000 Vrms;
9-1419111-2
9-1415006-1
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; IEC; UL; VDE;
9-1419111-1
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; IEC; UL; VDE;
9-1419125-5
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CQC; TUV; UL; VDE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved