Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Insulator Material: POLYETHYLENE; Total No. of Contacts: 15;
Median Price
$2.750
Lifecycle Status
Suppliers In-Stock
54
In-Stock Inventory
1k+
Avnet
1+ parts
$1.692
100+ parts
-
1k+ parts
10k+ parts
Sager
$1.850
Heilind Electronics
$1.869
$1.501
$1.774
Bürklin Elektronik
$1.930
Interstate Connecting
$2.099
$1.840
$1.661
Arrow
$2.238
$1.917
Distrelec
$2.828
$2.020
$1.551
Boersig
$2.913
Mouser Electronics
$3.610
$3.200
$3.050
$2.440
Conrad
$3.811
RS (Exports)
$4.030
$3.710
RS Americas
$4.330
$3.340
$2.950
Newark
$4.610
$3.650
$3.170
$3.160
TE Connectivity
$4.930
$3.560
$3.070
Element14
$5.310
$5.030
$4.720
Powell Electronics
$8.520
$4.161
PEI Genesis
Chip1Stop
$2.360
$1.390
Farnell
$2.829
Verical
$2.284
Future Electronics
$2.190
TTI Europe
$1.878
$1.835
NEP Electronics
TTI
$2.140
$2.050
Master Electronics
$1.880
$1.780
$1.750
Compona
Hawk Electronics
$1.460
$1.420
Digiode
$1.662
DF Sales Co.
$1.800
Freelance Electronics
$1.910
Nova Conductors
$2.082
TME
$4.000
$2.610
$2.500
IBS Electronics
$6.665
$4.095
$3.506
$3.464
Rapid Electronics
$2.415
VNN
Chip Stock
Vyrian
NAC Semi
$3.980
Electro Sonic
$2.300
$2.010
Resion
A2Z Electronics, Inc.
Q Components
Powertech Controls
R&J Components
Atlantic Semiconductor
EMSNET
Bristol Electronics
Extreme Components
Connector Distribution Corp
Right Parts Inc.
Elcom Components
Brevan Electronics
PAR Electronics
Ampacity Inc.
$1.340
Corphita
$1.575
Argo Parts USA
Continental Prestige Electronics
$1.980
Netroflash
$2.040
Allen Electronics Distributors
$3.950
$2.960
Assy Fe
Perfect Parts
Eastek
Glotronic Ltd.
Abacus Technologies
Authorized Procurement Solutions
Robosynatics
$6.650
$6.158
Lucentia Tech
GreenTree Electronics
EMSNET (Excess)
D-Sub Connectors 1658681-1 attributes and parameters. Explore more D-Sub Connectors devices from Tyco Electronics Amp
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1658681-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Fagor Electronica S Coop
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
Electronic Transistors
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Crimson Semiconductor
M24308/2-11F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 15; Termination Type: CRIMP; MIL Conformity: YES;
M83513/03-G03N
Glenair
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Termination Type: CRIMP;
M24308/2-3F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Rated Current - Signal: 7.5 A; Filter Feature: NO;
M24308/4-1Z
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO; Mating Contact Finish: NOT SPECIFIED;
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
M83513/04-D03N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-83513; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
M83513/01-AN
Airborn
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Body Width: .384 inch;
M24308/2-37F
Amphenol
Amphenol's M24308/2-37F D-Sub Connector features 37 contacts, 7.5A power rating, and 500M ohm insulation resistance. Ideal for cable mounting applications with a temperature range of -55 to 125°C. Utilizes crimp termination and steel shell material for durability in various industrial settings.
Cristek Interconnects
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mounting Option-1: HOLE .094;
15-006593
Conec
D SUBMINIATURE CONNECTOR; Manufacturer Series: 15-00659;
M83513/04-A03N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mounting Option-1: HOLE .094;
M24308/2-13Z
TE Connectivity's M24308/2-13Z D-Sub Connector features 44 contacts, GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator, and steel shell with zinc finish. With a temperature range of -55 to 125°C, it is ideal for military applications requiring a reliable connector with a rated current of 5A. The connector has a crimp termination type and is designed for cable mounting.
M83513/04-B03N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Empty Shell: NO;
171-009-203L001
Norcomp Interconnect Devices
Norcomp's 171-009-203L001 D-Sub Connector features 1.213" body length, 5A power rating, and gold flash termination. Ideal for cable mounting applications, this connector has a durable steel shell with UL flammability rating of 94V-0.
M24308/2-22F
TE Connectivity's M24308/2-22F D-Sub Connector features 104 contacts in a receptacle body measuring 2.744" x 0.683" x 0.414". With MIL-C-24308 reliability, it is ideal for cable mounting applications requiring crimp termination and staggered contact pattern. The connector's steel shell with cadmium finish ensures durability and secure locking.
M83513/02-BN
TE Connectivity's M83513/02-BN D-Sub Connector features 15 contacts, 2 rows, and a contact pitch of 0.05". With an insulation resistance of 5000000000 ohm, it is ideal for applications requiring a durable connector with a temperature range from -55 to 125°C. Suitable for cable and panel mounting, this microminiature connector has a shell made of nickel-plated metal and is designed for high signal currents up to 3A.
748364-1
TE Connectivity's 748364-1 D-Sub Connector features 15 contacts, 0.09" pitch, and EMI shielding. With a temperature range of -55 to 105°C, it is ideal for signal applications requiring a rated current of 5A. The connector has a steel shell with UL94V-0 flammability rating and crimp termination for reliable performance in various environments.
M24308/2-12F
TE Connectivity's M24308/2-12F D-Sub Connector has 26 contacts, rated at 5A. With a body size of 1.556" x 0.509" x 0.395", it operates b/w -55°C to 125°C. Ideal for cable mounting applications, featuring female crimp termination and staggered contact pattern.
M83513/01-GN
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Body or Shell Style: PLUG;
834249014
Molex
The Molex 834249014 is a D-Sub Connector with a mating contact pitch of 0.109", body length of 1.185", and body width of 0.33". It is commonly used in cable mounting applications, featuring gold termination contact finish and a total of 25 contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1658671-1
TE Connectivity D-Sub Connector 1658671-1 features EMI shielding, 26 contacts, and 105°C max operating temp. Ideal for commercial applications requiring high insulation resistance and UL flammability rating.
1658674-1
TE Connectivity 1658674-1 D-Sub Connector features EMI shielding, insulation resistance of 500M ohm, and UL flammability rating. Ideal for applications requiring a male contact gender, with a total of 78 contacts and crimp termination type. Operating temperature range from -55 to 105 °C.
1658609-4
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Panel Mount: NO;
1658612-4
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
1658681-1
TE Connectivity 1658681-1 D-Sub Connector with 15 contacts, 0.109" pitch, and 5A signal current rating. Ideal for commercial applications requiring EMI shielding and operating temperatures from -55 to 105°C. Features glass-filled polyamide insulator, crimp termination, and UL94V-0 flammability rating.
1658682-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
1658641-2
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Finish: TIN; Additional Features: AMPLIMITE, SHIELDED; Empty Shell: NO;
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: CRIMP;
1658655-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Additional Features: AMPLIMITE, SHIELDED;
1658640-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 50;
1658641-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Ports: 1;
1658606-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Insulation Diameter: .032 inch;
1658615-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: PLUG;
1658615-4
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: #4-40UNC;
1658641-3
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
1658612-2
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
1658654-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Insulation Diameter: .19 inch; Insulator Color: BLACK;
1658683-1
TE Connectivity's 1658683-1 D-Sub Connector features 44 contacts, 0.109" pitch, and 5A signal current rating. With EMI shielding and glass-filled polyamide insulator, it operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable crimp termination in a steel shell with UL certification.
1658642-1
TE Connectivity's 1658642-1 D-Sub Connector is a male plug with a body length of 1.213", body width of 0.494", and body depth of 0.462". It is EMI shielded, has an insulation resistance of 5GΩ, and can handle temperatures from -55°C to 105°C. This connector is commonly used in cable and panel mounting applications for commercial purposes.
1658680-1
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Insulation Diameter: .217 inch; UL Flammability Code: 94V-0; Panel Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved