Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP3T; Type (Actuator): LEVER; Minimum Operating Temperature: -20 Cel; Maximum AC Contact Voltage: 125 V;
Median Price
$4.260
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
$3.870
100+ parts
$3.790
1k+ parts
-
10k+ parts
Farnell
$7.893
Chip1Stop
Nova Conductors
$4.980
VNN
Rapid Electronics
Vyrian
R&J Components
IBS Electronics
$4.030
Electro Sonic
$4.020
$3.910
$3.850
Semicontronic
$2.580
$2.516
$2.503
Aztec Data Supply Inc.
$4.643
Continental Prestige Electronics
$4.802
$4.706
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Assy Fe
Kepictronics
Argo Parts USA
Netroflash
$4.880
$4.731
$4.631
Slide Switches 1-1825289-0 attributes and parameters. Explore more Slide Switches devices from Tyco Electronics Amp
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Electrical Life:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
1-1825289-0 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.50
SB
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148WS
Promax-johnton
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Semtech
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Gulf Semiconductor
Taitron Components
JS102000SAQN
C & K Components
JS102000SAQN by C & K Components is a black slide switch with SPDT function. It has 15000 cycles electrical life, 100M ohm insulation resistance, and operates b/w -40 to 85°C. Ideal for applications requiring a compact slide switch with surface mount-right angle mounting feature.
1101-M2S3CBE2
Lamb Industries
1101-M2S3CBE2 slide switch by Lamb Industries features a copper alloy terminal, 50000 cycles electrical life, and 0.4VA@20VDC DC max power rating. Ideal for applications requiring SPST switch function with gold over nickel plating, such as in electronic devices for temperature range of -30 to 85 °C.
A9S11-0021
Omron
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Manufacturer Series: A9S; Maximum Operating Force: 3.92 N; Switch Action: LATCHED;
CJS-1200B2
Nidec Copal Electronics
The Nidec Copal Electronics CJS-1200B2 is a SPDT slide switch with 200 cycles electrical life, 2.5" body width, and gold terminal finish. It operates b/w -40 to 85°C, with a max DC contact voltage of 6V and current of 0.1A. Ideal for surface mount applications requiring latched switch action in compact spaces.
CJS-1201TA
CJS-1201TA by Nidec Copal Electronics is a waterproof slide switch with SPDT function. It has an electrical life of 200 cycles, operates b/w -40°C to 85°C, and can handle a max DC contact voltage of 6V. Ideal for surface mount applications requiring a latched switch action.
CJS-1200B
The Nidec Copal Electronics CJS-1200B is a waterproof slide switch with SPDT function. It has an electrical life of 200 cycles, max DC contact voltage of 6V, and operating force of 5.9N. Ideal for surface mount applications in environments requiring water resistance and reliable switching capabilities.
1201-M2S3CQE2
1201-M2S3CQE2 by Lamb Industries is a DPST slide switch with copper alloy terminals. It has an electrical life of 50,000 cycles and insulation resistance of 1G ohm. Ideal for applications requiring a maintained switch action, with AC max rating of 2A@250VAC and DC max rating of 5A@28VDC.
A9S11-0022
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Body Length/Diameter: 9.4 mm; DC Maximum Rating R Load (Contact): .05A@60VDC; Sealing: IP64;
1825010-2
TE Connectivity
TE Connectivity 1825010-2 is a DPDT slide switch with electrical life of 15000 cycles. It has a body width of 7.37 inch and actuator travel of 2.794 mm. Ideal for applications requiring ON-ON contact function, such as panel mounting in electronic devices.
2-1437581-2
Tyco Electronics Alcoswitch
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-RIGHT ANGLE; Switch Function: 4PDT; Type (Actuator): EXTENDED SIDE TYPE; Body Height: 4.43 mm; Terminal Finish: TIN LEAD;
CL-SB-12B-02T
CL-SB-12B-02T by Nidec Copal Electronics is a SPDT slide switch with gold-plated contacts, suitable for applications requiring 2 positions and 12VDC max contact voltage. Featuring stainless steel housing and copper alloy terminals, it offers an electrical life of 10,000 cycles. Ideal for use in electronic devices that require reliable switching capabilities in a compact form factor.
1103M2S3CQE2
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HIGH TYPE; Solderability: MIL-STD; Termination Type: SOLDER;
MJS12R
Apem Components
The Apem Components MJS12R slide switch features SPDT switch function, 10000 cycles electrical life, and 100000000 ohm insulation resistance. With a thermoplastic housing material and silver plating, it is ideal for applications requiring a compact slide switch with high durability and reliability in temperatures ranging from -10 to 60°C.
EG1218A
E-switch
EG1218A slide switch by E-switch features SPDT function, 100000000 ohm insulation resistance, and 3 PCB hole count. With a body width of 3.9878 inch and height of 5.4102 mm, it is ideal for applications requiring a compact yet durable slide switch with copper alloy contacts. Operating b/w -20 to 70 °C, it offers reliable performance in various electronic devices.
CL-SB-22C-01
Nidec Copal Electronics' CL-SB-22C-01 is a slide switch with a housing made of POLYPHENYLENE SULPHIDE and terminals made of COPPER ALLOY. It has an electrical life of 10,000 cycles and insulation resistance of 100MΩ. This switch is commonly used in applications requiring a DPDT switch function.
MSSA1350
TE Connectivity MSSA1350 is a SP3T slide switch with 15000 cycles electrical life. Made of cold rolled steel, it has insulation resistance of 1G ohm and operates b/w -20 to 85°C. Ideal for panel mounting applications, it features ON-ON-ON contact function and solder termination.
CFS-1000MC
SLIDE SWITCH; Terminal Finish: Gold (Au); JESD-609 Code: e4;
1825289-2
TE Connectivity's 1825289-2 Slide Switch features DPDT switch function, 15000 cycles electrical life, and epoxy terminal sealing. Ideal for panel mounting applications in electronics requiring a latched ON-ON contact function with max AC/DC current of 0.4A@20V.
MSSA22G
MSSA22G by Apem Components is a DPDT slide switch with gold plating, 10000 cycles electrical life, and 0.4VA@20VDC power rating. It is used in applications requiring a sealed thermoplastic housing, such as consumer electronics and industrial control systems.
CAS-220TB2
CAS-220TB2 by Nidec Copal Electronics is a 3.9" slide switch with DPDT function, gold terminal finish, and latched switch action. It operates b/w -40°C to 85°C, handling a max DC contact voltage of 24V at 0.025A. Ideal for surface mount applications requiring reliable switching in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1825010-4
TE Connectivity 1-1825010-4 is a Slide Switch with 4PDT switch function and ON-ON contact function. It has a DC max power rating of 0.4VA@20VDC, making it suitable for applications requiring low voltage switching. The switch features extended top type actuator, gold over nickel plating, and copper alloy terminals for reliable performance in various electronic devices.
1-1825010-3
TE Connectivity 1-1825010-3 is a Slide Switch with 4PDT switch function, 15000 cycles electrical life, and actuator travel of 2.794mm. It has a max operating temperature of 80°C and is ideal for panel mounting applications requiring ON-ON contact function at up to 0.3A@115VAC/DC.
1-1825289-0
SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DP3T; Type (Actuator): LEVER; Contact Function: ON-ON-ON; Body Height: 7.5 mm;
1-1825010-8
TE Connectivity 1-1825010-8 is a Slide Switch with 4PDT switch function, ideal for ON-ON contact function. It has an actuator travel of 2.794mm and electrical life of 15000 cycles. Suitable for panel mounting applications with max AC contact voltage of 115V and DC contact current of 0.3A.
1-1825010-7
SLIDE SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PDT; Type (Actuator): EXTENDED TOP TYPE; Contact Function: ON-ON; Packing Method: TUBE;
1-1825289-1
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP3T; Type (Actuator): LEVER; Termination Type: SOLDER; JESD-609 Code: e4;
Tyco Electronics Amp
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP3T; Type (Actuator): LEVER; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Manufacturer Series: 1825289;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved