Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 4400; Rated Voltage: 50 V; Additional Features: C TYPE CIRCUIT; WITH SILVER PLATED INTERNAL TOOTH LOCK WASHER; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters 4400-099 attributes and parameters. Explore more Data Line Filters devices from Tusonix
Additional Features:
Capacitance:
Filter Type:
Maximum Insertion Loss:
Minimum Insulation Resistance:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Terminal Finish:
4400-099 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
CTS Tusonix is the leader in EMI/RFI filters and offers a diverse product line of standard as well as custom filters to suppress electromagnetic interference (EMI) / radio frequency interference (RFI) thereby providing customers with a wide range of Electro Magnetic Compatibility (EMC) solutions.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Grande Electronics
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Leshan Radio
MPZ2012S102ATD25
TDK
TDK's MPZ2012S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in surface mount applications.
HH-1M1608-121JT
Ceratech
FERRITE CHIP; Maximum DC Resistance: .14 ohm; Material: Ferrite; Rated Current: 1.1 A; No. of Functions: 1; Length: 1.6 mm;
NUF4001MUT2G
NUF4001MUT2G by Onsemi is a 4-function data line filter with 25 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it comes in a compact surface mount package measuring L1.8xB1.2xH0.55 mm.
ECMF02-4CMX8
STMicroelectronics
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
BLM18AG102SH1D
Murata Manufacturing
Murata Manufacturing's BLM18AG102SH1D is a chip bead data line filter with AEC-Q200 screening. Featuring 2 terminals, it operates b/w -55 to 125 °C and has a DC resistance of 0.5 ohm. With dimensions of L1.6XB0.8XH0.8 (mm), it is ideal for applications requiring a max frequency of 100 MHz and output impedance of 1000 OHM in surface mount configurations.
MMZ2012S601AT000
TDK MMZ2012S601AT000 is an 0805 chip bead filter with 2 terminals, rated at 0.5A. With a max DC resistance of 0.3 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications. Operating b/w -55 to 125 °C, this ferrite chip measures L2.0xB1.25xH0.85 mm and has TIN NICKEL COPPER terminal finish.
FCFBMJ3216HS800-T
Taiyo Yuden
Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
BLM31PG601SN1L
BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
P0502NLT
Pulse Electronics
Pulse Electronics P0502NLT is a Data Line Filter with 2 functions, AEC-Q200 screening. It has inductance of 470uH, max operating temp of 120°C, and rated current of 14A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
DLW31SN261SQ2L
Murata Manufacturing's DLW31SN261SQ2L is a data line filter with 2 functions, rated at 50V and 0.31A. It offers a max DC resistance of 0.5 ohm and an output impedance of 260 ohm. This surface mount filter operates b/w -40°C to 85°C, making it ideal for various electronic applications requiring noise suppression in data lines.
BMB2A0060LN2
TE Connectivity
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
744235801
Wuerth Elektronik & Kg
Wurth Elektronik 744235801 is a Data Line Filter with 2 functions, AEC-Q200 screening. Rated for 60V, it has an inductance of 1.3uH and max DC resistance of 0.12 ohm. Ideal for applications requiring surface mount filters with dimensions D4.53.2XH2.8mm and rated current of 1A.
NFM41PC204F1H3B
Murata Manufacturing's NFM41PC204F1H3B is a FEED THROUGH CAPACITOR with 1000 Mohm insulation resistance, 50V rated voltage, and 200000 uF capacitance. Ideal for data line filtering applications due to its compact size (L4.5XB1.6XH1.0 mm), high current rating of 2A, and wide operating temperature range (-55 to 85 °C).
BLM18PG471SZ1D
Murata Manufacturing's BLM18PG471SZ1D is a FERRITE CHIP filter with 470 OHM output impedance, suitable for data line filtering applications. With AEC-Q200 screening and 1A rated current, it operates b/w -55 to 125 °C, making it ideal for automotive electronics. This surface mount chip has 2 terminals, measures 1.6mm in length and 0.8mm in width, with a max DC resistance of 0.2 ohm.
744235110
Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.
BL02RN2R1M2B
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
2506031027Y0
Fair-rite Products
Fair-rite Products' 2506031027Y0 is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.6XB0.8XH0.8 (mm), it offers a max frequency of 1000 MHz and output impedance of 1000 OHM, making it ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
744221
Wurth Elektronik 744221 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 2uH and max DC resistance of 0.42 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring surface mount filters with dimensions L9.2XB6.0XH5.0 mm, such as electronic devices needing noise suppression on data lines.
B82787C0513H002
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
MMZ1608B102CTA00
TDK MMZ1608B102CTA00 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.6 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications, it operates b/w -55 to 125 °C and has a rated current of 0.3 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Tusonix
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved