Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: .1 %; Size Code: 1206;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays PFC-D1206-03-7151-7151-BB attributes and parameters. Explore more Resistor Networks & Arrays devices from Tt Electronics Plc
Additional Features:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated Power Dissipation (P):
Resistor Type:
Second or Last Element Resistance:
Size Code:
Sub-Category:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PFC-D1206-03-7151-7151-BB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
1552200168
Molex
WIRE AND CABLE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Sensitron Semiconductor
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Rochester Electronics
MNR14E0ABJ331
ROHM
ROHM's MNR14E0ABJ331 resistor network features 4 functions with 330 ohm resistance, 5% tolerance, and 50V operating voltage. Ideal for surface mount applications in electronic circuits requiring precise resistance values within a temperature range of -55 to 125°C.
4610X-101-470LF
Bourns
The Bourns 4610X-101-470LF resistor network features a resistance of 47 ohm, rated power dissipation of 1.25 W, and operating voltage of 100 V. It is ideal for applications requiring precise resistance values in electronic circuits with a temperature range from -55 to 125 °C.
766165191APTR13
Cts
The Cts 766165191APTR13 is a resistor network with a power dissipation of 0.12W and a resistance of 194 ohm. It is used in applications requiring surface mount mounting type and has a max operating temperature of 125 °C.
MPMT10015001ATS
Vishay Intertechnology
Vishay Intertechnology's MPMT10015001ATS is a thin film resistor array with 2 elements, offering 1000 ohm and 5000 ohm resistances. It has a power dissipation of 0.1 W, operating voltage of 100 V, and tolerance of 0.1%. Ideal for precision voltage divider applications due to its low temperature coefficient tracking of 2 ppm/°C.
YC164-JR-0747RL
Yageo
YC164-JR-0747RL by Yageo is a 47 ohm resistor network with 4 functions, METAL GLAZE/THICK FILM tech, and -55 to 155 °C operating temp. Ideal for AEC-Q200 compliant applications requiring isolated networks in SMT packages with 8 terminals and 5% tolerance.
LT5400ACMS8E-1#TRPBF
Analog Devices
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
SOMC16014K70GEA
Vishay Intertechnology's SOMC16014K70GEA resistor network features 15 elements with 4700 ohm resistance each. With a power dissipation of 1.2W and operating voltage of 50V, it is ideal for surface mount applications in various electronic circuits requiring precise resistance values and temperature stability.
EXBV8V331JV
The Panasonic EXBV8V331JV is a resistor network with 4 functions and a resistance of 330 ohm. It has a power dissipation of 0.063 W and can operate at temperatures ranging from -55 to 125 °C. This SMT package is commonly used in electronic circuits for its compact size and surface mount compatibility.
MPMT20011002ATS
Vishay Intertechnology's MPMT20011002ATS is a thin film resistor array with 2 elements, offering 0.1W power dissipation and 0.1% tolerance. Ideal for divider network applications, it operates b/w -55°C to 150°C with a tracking coefficient of 2 ppm/°C, making it suitable for precision temperature-sensitive circuits in compact SOT-23 packages.
CAY16-222J4LF
Bourns CAY16-222J4LF is a 2200 ohm resistor array with 8 terminals, rated for 70 to 125 °C. It features METAL GLAZE/THICK FILM tech in a rectangular SMT package. Ideal for applications requiring precise resistance values in compact surface-mount designs.
RM3216B103/603PBVW10
Thin Film Technology
RM3216B103/603PBVW10 by Thin Film Technology is a 2-function resistor array with 10000 ohm and 60000 ohm resistances. It has a power dissipation of 0.063 W, tolerance of 0.1%, and temperature coefficient tracking of 5 ppm/°C. Ideal for applications requiring isolated network type resistors in surface mount packages.
YC164-JR-07220RL
YC164-JR-07220RL by Yageo is a 220 ohm resistor network with 8 terminals, SMT package style, and 5% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.0625 W. Ideal for automotive applications due to AEC-Q200 reference standard compliance.
766161821GPTR7
766161821GPTR7 by Cts is a resistor network with 15 elements, each rated at 820 ohm resistance. It has a power dissipation of 1.2W and operates b/w -55 to 125 °C, making it suitable for various applications requiring precise resistance values in compact SMT packages.
RM2012A103/103PBVW10
RM2012A103/103PBVW10 by Thin Film Technology is a 0.1W resistor array with two 10000 ohm elements, offering 0.1% tolerance and 5 ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in compact designs.
Y0094V0010AA0L
Vishay Precision Group
ARRAY/NETWORK RESISTOR; Resistance: 20000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Tolerance: .05 %; Terminal Finish: Tin/Lead (Sn/Pb);
MPMT20011002AT3
Vishay Intertechnology's MPMT20011002AT3 is a thin film resistor array with 2 elements, offering 0.1W power dissipation and 0.1% tolerance. Ideal for divider networks, it operates b/w -55°C to 150°C with a tracking coefficient of 2 ppm/°C, making it suitable for precision applications in various industries.
ACASA1002E1002P1AT
Vishay Intertechnology's ACASA1002E1002P1AT is a thin film resistor array with 4 functions, 10000 ohm resistance, and 0.25% tolerance. Ideal for automotive applications due to AEC-Q200 standard compliance, operating voltage of 75 V, and temperature coefficient of 25 ppm/°C. Suitable for surface mounting with dimensions of 3.2mm x 1.5mm x 0.45mm.
YC324-JK-073K3L
Yageo's YC324-JK-073K3L resistor network features 4 functions with 3300 ohm resistance, rated for -55 to 155 °C. Ideal for AEC-Q200 standard applications, it is a SMT package with 8 terminals and 5% tolerance, operating at 200V and dissipating 0.125W power.
LT5400BHMS8E-4#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Tolerance: 7.5 %; Second or Last Element Resistance: 1000 ohm; Terminal Finish: MATTE TIN;
7708543/620P
ARRAY/NETWORK RESISTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Tt Electronics Plc
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved