Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors P270-SP12R1K attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Manufacturer Series:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Series:
Sub-Category:
Technology:
Terminal Shape:
Tolerance:
Operating Voltage:
P270-SP12R1K Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
KYOCERA AVX
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Zowie Technology
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1879318-6
TE Connectivity
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 17.3mm x 16mm x 7.5mm;
1624213-2
TE Connectivity 1624213-2 is a 10000 ohm logarithmic potentiometer with 3 terminals. It features carbon film technology, circular package shape, and horizontal actuator orientation. Ideal for applications requiring precise resistance adjustments in through-hole mounting setups.
3386P-1-105LF
Bourns
Bourns 3386P-1-105LF is a CERMET trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
3296W-1-504
Bourns 3296W-1-504 is a CERMET variable resistor with 25 turns and 500000 ohm resistance. It has linear resistance law, operates b/w -55 to 125 °C, and can handle up to 300V. Ideal for precision applications requiring fine adjustments in electronic circuits.
3299Y-1-201
The Bourns 3299Y-1-201 is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a max operating temperature of 125°C.
CCU1031-E
Ohmite Manufacturing
The Ohmite Manufacturing CCU1031-E is a 10000 ohm linear potentiometer with 6 lug terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mounting applications, this circular package resistor features a horizontal actuator shaft and is commonly used in electronic circuits requiring precise resistance adjustments.
3048L-5-502
Bourns 3048L-5-502 is a compact potentiometer with 5000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a temperature coefficient of 1000 ppm/°C.
M63M201KB40
Vishay Intertechnology
Vishay Intertechnology's M63M201KB40 is a CERMET variable resistor with 200 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting, it operates b/w -55 to 125 °C and offers a 270° rotation angle.
M43P502KB30T601
Vishay Intertechnology's M43P502KB30T601 is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.75 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a temperature coefficient of 100 ppm/°C.
3362U-1-502LF
Bourns 3362U-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
KU1031S28
Nte Electronics
The Nte Electronics KU1031S28 is a 3500 ohm linear carbon potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates at temperatures ranging from -65 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
RK09L1140A2U
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3299X-1-103LF
Bourns 3299X-1-103LF is a CERMET trimmer pot with 10000 ohm resistance, 25 turns, and linear resistance law. Ideal for PCB mounting applications, it has a max operating temperature of 125 °C and operates at an angle of rotation up to 9000°.
3250W-1-100
The Bourns 3250W-1-100 is a 10 ohm, 1W trimmer resistor with linear resistance law and 5% tolerance. It features wire wound technology, vertical actuator orientation, and through-hole mounting. Ideal for applications requiring precise resistance adjustments in PCB assemblies.
3852A-282-104AL
Bourns 3852A-282-104AL is a linear potentiometer with 100k ohm resistance, 10% tolerance, and 2W power dissipation. It has a circular package, panel mount style, and operates b/w -1°C to 125°C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3006P-1-501LF
Bourns 3006P-1-501LF is a 500 ohm linear trimmer pot with 15 turns and CERMET technology. It has a max operating temperature of 125°C, suitable for PCB mount applications in various electronic circuits requiring precise resistance adjustments.
PTF01-152A-103B2
Bourns PTF01-152A-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a slide actuator, vertical orientation, and PCB mount package style. Ideal for applications requiring precise voltage control in electronic circuits.
3329W-1-503LF
Bourns 3329W-1-503LF is a CERMET trimmer resistor with 50000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for adjusting voltage levels with a linear law of resistance. Operating temperature ranges from -55 to 150 °C.
3856H286104A
Bourns 3856H286104A is a CERMET POTENTIOMETER with 100k ohm resistance, 10% tolerance, and 2W power dissipation. Linear construction, chassis mount package style. Ideal for precise voltage control in electronic circuits with operating temps from -65 to 125°C.
67WR5KLF
Tt Electronics Plc
67WR5KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85°C rated temperature. It has a PCB mount package style and is ideal for applications requiring precise resistance adjustments in electronic circuits. With a max operating temperature of 125°C and an operating voltage of 200V, it offers reliable performance in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved