Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays L101S201JLF attributes and parameters. Explore more Resistor Networks & Arrays devices from Tt Electronics Plc
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Length (Lead):
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
L101S201JLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.50
SB
8533.21.00.75
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Rugao Dachang Electronic
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
08055C104KAT4A
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
RM3216B103/503PBVW10
Thin Film Technology
RM3216B103/503PBVW10 by Thin Film Technology is a 2-function resistor array with 10000 ohm and 50000 ohm resistances. It has a 0.1% tolerance, 0.063 W power dissipation, and 5 ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in isolated networks.
CN1E4TTD470J
Koa Speer Electronics
Koa Speer Electronics CN1E4TTD470J is a 47 ohm resistor network with 8 terminals, 0.063 W power dissipation, and 5% tolerance. Ideal for surface mount applications in electronics requiring isolated network type resistors with operating voltage up to 25 V. Suitable for temperature-sensitive environments with a wide range from -55 to 125 °C.
YC122-JR-0756RL
Yageo
YC122-JR-0756RL by Yageo is a 56 ohm resistor network with 2 functions. It features METAL GLAZE/THICK FILM technology, WRAPAROUND terminals, and operates b/w -55 to 155 °C. Ideal for AEC-Q200 compliant applications requiring a compact SMT package with isolated network type.
CAY16-1002F4LF
Bourns
Bourns CAY16-1002F4LF is a 4-function resistor network with 10000 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and high operating temperatures up to 125°C.
BCN164AB220J7
Tt Electronics Plc
BCN164AB220J7 by Tt Electronics Plc is a 22 ohm resistor network with 0.063 W power dissipation and 70 °C rated temperature. Ideal for surface mount applications, it features METAL GLAZE/THICK FILM technology in a rectangular package, suitable for use in automotive electronics due to AEC-Q200 reference standard compliance.
SIL09E104J
TE Connectivity
TE Connectivity's SIL09E104J is a thick film resistor network with 8 elements, rated at 100000 ohm resistance and 5% tolerance. It operates b/w -55 to 125 °C and can handle up to 100V. Ideal for through-hole mounting in various electronic applications.
GUS-QSCBLF-012701-JG
GUS-QSCBLF-012701-JG by Tt Electronics Plc is a miniature resistor network with 2700 ohm resistance, 24 terminals, and 5% tolerance. It uses TANTALUM NITRIDE/NICKEL CHROME tech for applications requiring a rated power dissipation of 0.05 W in temperatures ranging from -55 to 125 °C.
BCN4D105J7
BCN4D105J7 by Tt Electronics Plc is a 0.125W resistor array with 1000000 ohm resistance, suitable for SMT mounting. Operating voltage of 75V and temperature range from -55 to 155 °C make it ideal for various electronic applications requiring precise resistance values in compact spaces. The chip package with matte tin finish and nickel barrier ensures reliable performance in isolated network configurations.
MNR14E0APJ101
ROHM
ROHM's MNR14E0APJ101 resistor network features 4 functions with 100 ohm resistance, 5% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with a temperature range of -55 to 155 °C.
742C0831001FP
Cts
742C0831001FP by Cts is a resistor network with 4 functions, each with a resistance of 1000 ohm and a tolerance of 1%. It has a power dissipation of 0.252 W and operates at temperatures ranging from -55 to 125 °C. This SMT package is ideal for applications requiring isolated networks in automotive electronics.
EXB28V470JX
Panasonic
The Panasonic EXB28V470JX is a resistor network with 4 functions, each with 47 ohm resistance. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring isolated networks in compact spaces.
4816P-T01-122LF
Bourns 4816P-T01-122LF is a resistor network with 8 functions, 1200 ohm resistance, and 1.28 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and isolated network type.
746X101103JP
746X101103JP by Cts is a resistor network with 8 elements, each having a resistance of 10000 ohm. It features a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact SMT packages.
YC124-FR-0710KL
YC124-FR-0710KL by Yageo is a 4-function resistor array with 10000 ohm resistance, 1% tolerance, and operating voltage of 25V. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and temperature range from -55°C to 155°C.
CAT16-470J4LF
CAT16-470J4LF by Bourns is a 47 ohm resistor network with 8 terminals, rated for 70 to 125 °C. It features 0.0625 W power dissipation, METAL GLAZE/THICK FILM tech, and SMT package style. Ideal for applications requiring isolated resistor networks in compact surface mount designs.
4608X-102-104LF
Bourns 4608X-102-104LF resistor network features 100000 ohm resistance, 2.54 mm lead spacing, and 0.3 W power dissipation. Ideal for applications requiring precise resistance values in isolated networks with a temperature range of -55 to 125 °C.
TC164-FR-072K2L
Yageo's TC164-FR-072K2L resistor network features 4 functions with 2200 ohm resistance, 1% tolerance, and 155°C max operating temp. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package measuring 3.2mm x 1.6mm x 0.6mm.
EXBV8V330JV
The Panasonic EXBV8V330JV is a resistor network with 4 functions, each with 33 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for SMT applications requiring isolated networks with 5% tolerance at 50V operating voltage.
Y1365V0008QT9R
Vishay Precision Group
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 125 Cel; Tolerance: .02 %;
MAX5491WA30000-T
Maxim Integrated
ARRAY/NETWORK RESISTOR; JESD-609 Code: e0; Terminal Finish: TIN LEAD; Network Type: DIVIDER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved