Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
ACDS - Activité Composants Distribution Service
1+ parts
100+ parts
1k+ parts
10k+ parts
Bristol Electronics
Dan-Mar Components
Authorized Procurement Solutions
Variable Resistors 72XWR25KLF attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
72XWR25KLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Rugao Dachang Electronic
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Sensitron Semiconductor
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
3590S-1-501L
Bourns
Bourns 3590S-1-501L is a 500 ohm POTENTIOMETER with 5% tolerance, suitable for Panel Mount applications. It has a rated power dissipation of 2W, operates b/w -40 to 125 °C, and offers a temperature coefficient of 50 ppm/°C. Ideal for precise resistance adjustments in various electronic circuits.
PVZ3K104E01R00
Murata Manufacturing
Murata Manufacturing's PVZ3K104E01R00 is a 100k ohm linear trimmer resistor with 30% tolerance. It operates at temperatures ranging from -25°C to 85°C, with a temperature coefficient of 500 ppm/°C. This surface mount variable resistor is ideal for applications requiring precise resistance adjustments in compact electronic devices.
PV32P502A01B00
Murata Manufacturing's PV32P502A01B00 is a 5000 ohm linear trimmer pot with 3 terminals. It has a rated power dissipation of 0.5W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting, this variable resistor is commonly used in applications requiring precise resistance adjustments.
3223W-1-502E
Bourns 3223W-1-502E is a linear trimmer resistor with 11 turns and 5000 ohm resistance. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a power dissipation of 0.125 W and voltage rating of 200 V, it is ideal for surface mount designs needing high precision.
RRS1K0E
Ohmite Manufacturing
Ohmite Manufacturing's RRS1K0E is a 1000 ohm POTENTIOMETER with LINEAR resistance law, WIRE WOUND technology, and 10% tolerance. It features a 500W power dissipation rating, 325° rotation angle, and PANEL MOUNT package style. Ideal for precise control applications in various electronic circuits.
RK27112A0A16
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3-1625931-1
TE Connectivity
TE Connectivity's 3-1625931-1 is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 2 W power dissipation. It has VERTICAL actuator orientation and SHAFT type, suitable for PANEL MOUNT applications in various electronic devices. Operating temperature ranges from -55 to 125 °C with a max voltage of 315 V.
PTF01-152A-103B2
Bourns PTF01-152A-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a slide actuator, vertical orientation, and PCB mount package style. Ideal for applications requiring precise voltage control in electronic circuits.
PT10MV10-103A2020-S
Amphenol
Amphenol's PT10MV10-103A2020-S is a 10000 ohm linear carbon potentiometer with 3 terminals. It has a tolerance of 20%, operates at temperatures from -25 to 70 °C, and can handle up to 200V. Ideal for PCB mounting applications requiring precise resistance adjustments in compact spaces.
3224W-1-103E
Bourns 3224W-1-103E is a linear trimmer resistor with 12 turns and 10000 ohm resistance. It operates b/w -65 to 150 °C, suitable for surface mount applications requiring precise resistance adjustments in electronic circuits. The CERMET technology and screw actuator make it ideal for compact designs with a tolerance of 10%.
M63M201KB30T607
Vishay Intertechnology
Vishay Intertechnology's M63M201KB30T607 is a CERMET TRIMMER resistor with linear resistance law, 10% tolerance, and 270° rotation angle. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125 °C.
P270-SP12R5K
Tt Electronics Plc
P270-SP12R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with a 2W power dissipation rating. It features a conductive plastic technology, 312° rotation angle, and operates b/w -55 to 120 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
6539S-1502
Bourns 6539S-1502 is a 5000 ohm linear potentiometer with 15% tolerance and 1W power dissipation. It features a conductive plastic technology, shaft actuator type, and panel mount package style. Ideal for applications requiring precise resistance adjustment in servo systems or control panels.
3856H286104A
Bourns 3856H286104A is a CERMET POTENTIOMETER with 100k ohm resistance, 10% tolerance, and 2W power dissipation. Linear construction, chassis mount package style. Ideal for precise voltage control in electronic circuits with operating temps from -65 to 125°C.
P272-SP22BR5K
P272-SP22BR5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with a rated temperature of 70°C. It is a panel mount variable resistor with a max operating temperature of 120°C, suitable for applications requiring precise resistance control.
3306W-1-504
Bourns 3306W-1-504 is a linear trimmer resistor with 500k ohm resistance, 25% tolerance, and 0.2W power dissipation. It is used in PCB mounting applications for adjusting voltage levels with an operating range of -25 to 100°C.
3314G-1-502E
Bourns 3314G-1-502E is a CERMET variable resistor with 5000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 300 V.
RT025AS1001KB
RT025AS1001KB by Vishay Intertechnology is a 1000 ohm linear wire wound potentiometer with 25W power dissipation. It has a temperature range of -55 to 320 °C and operates at 158V. Ideal for panel mount applications requiring precise resistance adjustment in electronic circuits.
3299X-1-504LF
The Bourns 3299X-1-504LF is a CERMET trimmer pot with 25 turns, 500000 ohm resistance, and linear law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
PTC15LV02-103A2020
Amphenol's PTC15LV02-103A2020 is a CERMET POTENTIOMETER with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -40 to 90 °C. Ideal for PCB mounting applications requiring precise voltage control in a compact package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved