Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Resistance: 100 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 105 Cel; Tolerance: 5 %; Length (Lead): 4.8 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 7276R100L.25FS attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Length (Lead):
Manufacturer Series:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Angle Of Rotation:
Series:
Sub-Category:
Technology:
Tolerance:
7276R100L.25FS Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Shanghai Lunsure Electronic Technology
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Secos
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Diodes Incorporated
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
3306W-1-202
Bourns
Bourns 3306W-1-202 is a linear trimmer resistor with 2000 ohm resistance, rated for 100V and 0.2W power dissipation. It has an operating temperature range of -25 to 100 °C and features a screw actuator for precise adjustments. Ideal for PCB mounting applications requiring accurate resistance tuning in compact spaces.
TS53YJ502MR10
Vishay Intertechnology's TS53YJ502MR10 is a 5000 ohm linear trimmer resistor with 20% tolerance, suitable for surface mount applications. With an operating voltage of 35.4 V and rated power dissipation of 0.25 W, it has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Its rectangular package measures 5mm x 5mm x 2.7mm and features a screw actuator with an angle of rotation of 220°.
534B1103JC
Vishay Intertechnology's 534B1103JC is a wire wound potentiometer with 10 turns and linear resistance law. It has a resistance of 10000 ohm, rated power dissipation of 2W, and operates b/w -55 to 125 °C. Ideal for applications requiring precise voltage control in industrial machinery and electronic equipment.
534B1101JC
Vishay Intertechnology's 534B1101JC is a 100 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. Operating at temperatures from -55 to 125 °C, it has a rated power of 2W and operates at an angle of rotation of 3600°. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
91A1A-B28-B13L
Bourns 91A1A-B28-B13L is a linear conductive plastic potentiometer with 5000 ohm resistance, suitable for panel mount applications. It has a rated power dissipation of 1W, operates b/w -40 to 125°C temperatures, and offers a tolerance of 20%. Ideal for precise control in various electronic devices.
3299Y-1-501
Bourns 3299Y-1-501 is a CERMET trimmer pot with 500 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates at temperatures from -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments.
SM-42TW104
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW104 is a 100000 ohm linear trimmer resistor with 11 turns and CERMET technology. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C, making it ideal for precise voltage adjustments in electronic circuits. This surface mount device with J BEND terminals is commonly used in applications requiring accurate resistance control at temperatures up to 85 °C.
35WR10KLFTR
Tt Electronics Plc
35WR10KLFTR by Tt Electronics Plc is a 10000 ohm linear trimmer resistor with 3 terminals. Operating voltage of 50V, rated power dissipation of 0.1W, and temperature coefficient of 250 ppm/°C make it ideal for surface mount applications requiring precise resistance adjustments.
3382H-1-103
Variable Resistors;
RV4NAYSD102A
Eti Systems
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
T7YA102MB40
Vishay Intertechnology's T7YA102MB40 is a 1-turn, linear variable resistor with a resistance of 1000 ohm. It has a rated temperature of 70°C and operates at voltages up to 22.4V. This PCB mount trimmer resistor is commonly used in electronic circuits for precise voltage or current adjustments.
89PR50KLFTB
89PR50KLFTB by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, 20 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a tolerance of 10% and rated power dissipation of 0.75 W.
51CAD-E24-B18L
The Bourns 51CAD-E24-B18L is a linear conductive plastic potentiometer with 50000 ohm resistance, suitable for PCB mounting. It has a temperature coefficient of 1000 ppm/°C and operates b/w 1-125 °C. Ideal for applications requiring precise resistance adjustment in compact spaces.
93R1A-R22-A05L
Bourns 93R1A-R22-A05L is a CERMET POTENTIOMETER with 100 ohm resistance, 10% tolerance, and 2W power dissipation. It has a single turn construction, PCB mount package style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustments in compact spaces.
93R1A-R22-A13L
Bourns 93R1A-R22-A13L is a linear cermet potentiometer with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. Ideal for panel mount applications, it has an operating temperature range of -40 to 125 °C and a shaft actuator with 240° rotation angle.
PTV09A-4020F-B103
Bourns PTV09A-4020F-B103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. It is used in PCB mount applications for voltage control in electronic circuits. Operating temperature ranges from -10 to 50 °C.
P161G201PSN25D204
P161G201PSN25D204 by Tt Electronics Plc is a 200000 ohm potentiometer with 12 terminals, rated for temperatures b/w -10 to 70 °C. Featuring conductive plastic technology and an audio resistance law, it is ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3314J-1-504E
Bourns 3314J-1-504E is a CERMET variable resistor with 500000 ohm resistance, linear law, and 20% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 300V. Features screw actuator, 210° rotation angle, and compact SMT package.
PTL60-10G1-103B2
The Bourns PTL60-10G1-103B2 is a linear carbon potentiometer with a resistance of 10000 ohm. It has a rated temperature of 70°C and can be mounted through hole. This variable resistor is commonly used in PCB applications for precise voltage control.
P16NP222KAB15
Vishay Intertechnology's P16NP222KAB15 is a CERMET POTENTIOMETER with 2200 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PANEL MOUNT applications, it has a linear law of resistance and operates b/w -40 to 85 °C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved