Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Packing Method: BULK;
Median Price
$1.435
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.160
100+ parts
$1.394
1k+ parts
$1.113
10k+ parts
$0.948
Mouser Electronics
$1.270
$1.050
Verical
-
$1.300
Master Electronics
$1.086
$0.898
Arrow
$0.739
NAC Semi
$1.510
ACDS - Activité Composants Distribution Service
Ashlea Components Ltd
Bristol Electronics
$1.140
$0.684
Dan-Mar Components
Prism Electronics
HZD GmbH
Advanced Electronics
$0.037
$0.034
$0.030
Variable Resistors 67PR20KLF attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
67PR20KLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
NXP Semiconductors
T93YB104KT20
Vishay Intertechnology
Vishay Intertechnology's T93YB104KT20 is a 100k ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a screw actuator, matte tin terminals, and can handle up to 0.5 W power dissipation.
95C1D-E24-L15L
Bourns
The Bourns 95C1D-E24-L15L is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It is used in applications requiring precise resistance adjustment such as audio equipment and industrial controls due to its linear law of resistance and horizontal actuator orientation. With a temperature range from -40°C to 125°C, it offers reliable performance in various environments.
P16NP222KAB15
Vishay Intertechnology's P16NP222KAB15 is a CERMET POTENTIOMETER with 2200 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PANEL MOUNT applications, it has a linear law of resistance and operates b/w -40 to 85 °C temperatures.
3296W-1-501LF
Bourns 3296W-1-501LF is a 500 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. Operating voltage of 300V and power dissipation of 0.5W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
RK27112A00CC
Alps Alpine
Alps Alpine RK27112A00CC is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 300° rotation angle. It is used in PCB mount applications for precise control of electronic devices due to its shaft actuator and through-hole mounting capability.
89PHR10K
Tt Electronics Plc
89PHR10K by Tt Electronics Plc is a CERMET trimmer pot with 10000 ohm resistance, 20 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.75 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3541H-1-102L
Bourns 3541H-1-102L is a 1000 ohm linear potentiometer with 10 turns, rated for temperatures from -40 to 125 °C. Ideal for panel mount applications, it features a shaft actuator and gold terminal finish, making it suitable for precise resistance adjustments in various electronic devices.
3299Y-1-101LF
Bourns 3299Y-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a max voltage of 300 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
PV37W103C01B00
Murata Manufacturing
Murata Manufacturing's PV37W103C01B00 is a 10000 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates at temperatures from -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments up to 200 V. The CERMET technology and screw actuator make it ideal for various electronic devices.
3362W-1-101LF
Bourns 3362W-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 70°C to 125°C operating range. The rectangular package with horizontal actuator and screw type design makes it suitable for precise adjustments in various electronic devices.
3549S-1AA-201A
Bourns 3549S-1AA-201A is a 200 ohm, 10-turn linear wirewound potentiometer with 3% tolerance. It has a rated power dissipation of 2W and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact circular package.
PA16NP473MAB15
Vishay Intertechnology's PA16NP473MAB15 is a 47000 ohm linear potentiometer with 3 terminals. It operates b/w -40 to 85 °C and has a tolerance of 20%. Ideal for panel mount applications, it features a circular package with a diameter of 16 mm and an operating voltage of 153 V.
3224W-1-503E
The Bourns 3224W-1-503E is a CERMET variable resistor with 12 turns and linear resistance law. With a resistance of 50k ohm, it operates b/w -65 to 150 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications, this trimmer resistor offers precise adjustment in electronic circuits.
TC42X-2-102E
The Bourns TC42X-2-102E is a linear cermet variable resistor with 1 turn and a resistance of 1000 ohm. It has a temperature coefficient of 250 ppm/°C and can operate at temperatures ranging from -40 to 100 °C. This surface mount trimmer is commonly used in electronic circuits for voltage control and adjustment.
3314J-2-104E
The Bourns 3314J-2-104E is a CERMET variable resistor with 100k ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage control in automotive electronics due to AEC-Q200 standard compliance.
3296Y-1-502LF
Bourns 3296Y-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise voltage adjustments in electronic circuits.
89PHR500KLF
89PHR500KLF by Tt Electronics Plc is a TRIMMER resistor with 500000 ohm resistance, rated at 0.75 W power dissipation. It has a linear law of resistance, operates b/w -55 to 125 °C, and features CERMET technology. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
M64Z202KB40
Vishay Intertechnology's M64Z202KB40 is a CERMET variable resistor with 21 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
PTA4543-2015CPB103
Bourns PTA4543-2015CPB103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a vertical orientation, rectangular package shape, and slide actuator type. Ideal for applications requiring precise voltage control in temperatures ranging from -10 to 50 °C.
3852A-282-502AL
Bourns 3852A-282-502AL is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2 W power dissipation. It has a linear law of resistance, operates b/w -1 to 125 °C, and offers a 250° angle of rotation. Ideal for panel mount applications in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved