Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Median Price
$2.244
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Future Electronics
1+ parts
$1.260
100+ parts
$1.220
1k+ parts
$1.180
10k+ parts
-
DigiKey
$2.440
$1.727
$1.446
$1.277
Mouser Electronics
$1.720
$1.440
$1.270
Bürklin Elektronik
$2.600
$2.130
$1.840
TTI
$1.580
$1.280
$1.120
Verical
$2.133
Arrow
Master Electronics
$1.610
$1.080
TME
IBS Electronics
$1.032
$0.960
NAC Semi
$2.100
$1.940
HZD GmbH
R&J Components
LIBRA Elektronik GmbH
Prism Electronics
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Variable Resistors 64XR5KLF attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
64XR5KLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148WS
Daco Semiconductor
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
67PR100KLF
Tt Electronics Plc
67PR100KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 85-125 °C operating temperature range. Ideal for PCB mounting applications due to its rectangular package shape and wire terminal finish.
3312J-1-502E
Bourns
Bourns 3312J-1-502E is a CERMET trimmer resistor with 5000 ohm resistance, 20% tolerance, and 255° rotation angle. It is used in applications requiring precise voltage adjustments in compact SMT packages. Operating temperature ranges from -55 to 125 °C.
TC33X-2-104E
Bourns TC33X-2-104E is a linear trimmer resistor with 100k ohm resistance, 25% tolerance, and 0.15W power dissipation. It operates b/w -40 to 100°C, suitable for applications requiring precise resistance adjustments in compact SMT designs at up to 50V voltage.
53C135K
Honeywell Sensing And Control
53C135K by Honeywell Sensing And Control is a linear potentiometer with resistance of 35k ohm, 10% tolerance, and 2W power dissipation. It has a circular package, horizontal actuator orientation, and conductive plastic technology. Ideal for panel mount applications in temperature range -55 to 120°C.
3214W-1-102E
The Bourns 3214W-1-102E is a CERMET trimmer pot with linear resistance law, 1000 ohm resistance, and 5 turns. It is used in applications requiring precise voltage adjustments due to its high operating voltage of 300V and compact SMT package style. With an operating temperature range from -65°C to 150°C, it offers reliable performance in various electronic devices.
159-11102
Vishay Intertechnology's 159-11102 is a CERMET POTENTIOMETER with 1000 ohm resistance, 20% tolerance, and 3.5 W power dissipation. It has a cylindrical package, panel mount style, and operates b/w -55 to 150 °C. Ideal for applications requiring precise resistance adjustment in compact spaces.
CLU2521E
Ohmite Manufacturing
Ohmite Manufacturing's CLU2521E is a 2500 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
3296W-1-102LF
Bourns 3296W-1-102LF is a 1000 ohm, 25-turn linear trimmer resistor with CERMET technology. It has a max operating temperature of 125°C and rated power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in circuits with up to 300 V operating voltage.
3299Y-1-503
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3299Y-1-101LF
Bourns 3299Y-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a max voltage of 300 V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3590S-2-201L
Bourns 3590S-2-201L is a 200 ohm wire wound potentiometer with 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125°C. Ideal for panel mount applications due to its cylindrical package shape and round construction, offering precise resistance adjustments in various electronic circuits.
3362S-1-102LF
Bourns 3362S-1-102LF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has linear resistance law, operates b/w -55 to 125 °C, and offers 240° rotation angle. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3296W-1-503LF
Bourns 3296W-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
2-1879319-3
TE Connectivity
POTENTIOMETER; Dimensions: 13.75mm x 11.7mm x 5.1mm; Orientation (Actuator): HORIZONTAL;
3306W-1-105
Bourns 3306W-1-105 is a linear trimmer resistor with 1000000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -25 to 100 °C.
93R1A-R22-A08L
Bourns 93R1A-R22-A08L is a CERMET POTENTIOMETER with 500 ohm resistance, 10% tolerance, and 2W power dissipation. It has a single turn construction, 240° rotation angle, and operates b/w -40 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in compact spaces.
3500S-2-102L
Bourns 3500S-2-102L is a 1000 ohm linear potentiometer with 10 turns, rated for temperatures from 1 to 125 °C. It features wire wound technology, gold over nickel terminal finish, and a shaft actuator. Ideal for precise resistance adjustments in applications requiring a panel or chassis mount setup.
T63YB103KT20
Vishay Intertechnology's T63YB103KT20 is a 10000 ohm linear trimmer resistor with 13 turns, rated for temperatures b/w -55 to 155 °C. It features a CERMET technology in a rectangular package suitable for PCB mounting applications. The resistor has a tolerance of 10% and can operate at voltages up to 50 V, making it ideal for precise circuit adjustments.
3362U-1-102LF
Bourns 3362U-1-102LF is a linear trimmer resistor with 1000 ohm resistance, rated at 0.5W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
3386F-1-203LF
Bourns 3386F-1-203LF is a CERMET trimmer resistor with 20000 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications in temperature-sensitive environments with an operating range from -55 to 125 °C. Features vertical actuator orientation and screw-type actuator for precise adjustments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved