Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 44WR100LFT13 attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
44WR100LFT13 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Dc Components
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Mde Semiconductor
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
TS63Y502KT20
Vishay Intertechnology
Vishay Intertechnology's TS63Y502KT20 is a 5000 ohm TRIMMER resistor with 14 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.25 W. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
534B1501JC
Vishay Intertechnology's 534B1501JC is a 500 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. Operating voltage of 31.6 V, rated power dissipation of 2 W, and temperature coefficient of 20 ppm/°C make it ideal for precise control applications in electronics. Its panel mount package style with horizontal actuator orientation suits various industrial settings.
3500S-2-102L
Bourns
Bourns 3500S-2-102L is a 1000 ohm linear potentiometer with 10 turns, rated for temperatures from 1 to 125 °C. It features wire wound technology, gold over nickel terminal finish, and a shaft actuator. Ideal for precise resistance adjustments in applications requiring a panel or chassis mount setup.
73JA10K
Honeywell Sensing And Control
73JA10K by Honeywell Sensing And Control is a linear wire wound potentiometer with 10000 ohm resistance, 5% tolerance, and 2W power dissipation. It has a vertical actuator orientation, circular package shape, and shaft actuator type. Ideal for chassis mount applications with operating temperatures ranging from -40 to 120 °C.
PTL60-15O1-103B2
PTL60-15O1-103B2 by Bourns is a linear carbon potentiometer with a resistance of 10000 ohm. It has a rated temperature of 70°C and can be mounted through hole. This variable resistor is commonly used in PCB applications for precise voltage control.
RV6LAYSA103A
Tokyo Cosmos Electric
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 120 Cel; Tolerance: 10 %;
P271-DS11R5K
Tt Electronics Plc
P271-DS11R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with 10% tolerance and 2W power dissipation. It has a circular package, horizontal actuator orientation, and conductive plastic technology. Ideal for panel mount applications, it operates b/w -55°C to 120°C temperatures.
PV37W103C01B00
Murata Manufacturing
Murata Manufacturing's PV37W103C01B00 is a 10000 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates at temperatures from -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments up to 200 V. The CERMET technology and screw actuator make it ideal for various electronic devices.
3590S-2-501L
Bourns 3590S-2-501L is a 500 ohm POTENTIOMETER with 5% tolerance, suitable for panel mount applications. Featuring WIRE WOUND technology, it has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for precise resistance adjustments in various electronic circuits.
3299X-1-502LF
The Bourns 3299X-1-502LF is a linear trimmer pot with a resistance of 5000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications where precise resistance adjustments are required.
PTC10LV10203A2020
Piher Sensors And Controls Sa
PTC10LV10203A2020 by Piher Sensors And Controls Sa is a CERMET variable resistor with 20000 ohm resistance, linear law, and 20% tolerance. It has a rated power dissipation of 0.33 W and operates b/w -40 to 90 °C. Ideal for through hole mounting applications in electronic circuits.
P11A2Q0EBSZ00103KL
Vishay Intertechnology P11A2Q0EBSZ00103KL is a 10000 ohm logarithmic potentiometer with 3 terminals. It has a rated power dissipation of 0.25W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting, it offers a 270° rotation angle and is suitable for various electronic applications.
3362U-1-502LF
Bourns 3362U-1-502LF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
3386H-1-203LF
The Bourns 3386H-1-203LF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications for adjusting or trimming circuit parameters.
PTB0143-2010BPA502
The Bourns PTB0143-2010BPA502 is a 5000 ohm POTENTIOMETER with VERTICAL orientation, CARBON technology, and AUDIO Law Of Resistance. It has a rated power dissipation of 0.25 W and operates at voltages up to 350 V. Ideal for PCB Mount applications in audio equipment due to its high precision and durability.
91R1A-R22-B10L
Bourns 91R1A-R22-B10L is a linear conductive plastic potentiometer with 1000 ohm resistance, 20% tolerance, and 1W power dissipation. Ideal for panel mount applications in devices requiring precise resistance adjustments within a temperature range of -40 to 125°C.
PT-6KV-473A2020-PM
Amphenol
Amphenol PT-6KV-473A2020-PM is a 47000 ohm linear carbon potentiometer with 3 terminals. It has a tolerance of 20%, rated power dissipation of 0.1W, and operates b/w -25°C to 70°C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
7286R20KL.25
7286R20KL.25 by Tt Electronics Plc is a 10-turn linear wire wound potentiometer with 20000 ohm resistance, suitable for panel mount applications. With a rated power dissipation of 2W and operating temperature range from -55 to 125 °C, it offers precise control in various electronic circuits. Its circular package design and gold terminal finish make it ideal for industrial equipment requiring accurate resistance adjustments.
RJS5K0E
Ohmite Manufacturing
The Ohmite Manufacturing RJS5K0E is a 5000 ohm linear wire wound potentiometer with 10% tolerance and 50W power dissipation. It features a circular package, panel mount style, and shaft actuator for precise control in various applications such as industrial machinery and electronic equipment.
ST-4ETD10KOHM(103)
Nidec Copal Electronics
Nidec Copal Electronics' ST-4ETD10KOHM(103) is a 10000 ohm linear trimmer resistor with 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications in various electronic devices due to its compact size and high temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved