Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Body Depth: 1.625 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
BNC Connectors UBJ229-016 attributes and parameters. Explore more BNC Connectors devices from Trompeter Electronics
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
UBJ229-016 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Trompeter Electronics Company Overview Trompeter Electronics produces RF interconnect end products, cross-connects, and related tools for the Telecom, Central Office, Broadcast, Military Aerospace, and Instrumentation markets worldwide. In addition, the company has a broad line of patch panel insertion-controlled interconnect modules and a rapid response RF cable assembly business. As a result of the Emerson Connectivity acquisition of Stratos International in May, 2007, the Trompeter product line is now a part of the Connectivity Solutions business unit of Emerson Network Power. Subsequently, in July, 2014, Bel Fuse acquired Emerson Network Power Connectivity Solutions and merged its operations into the Cinch Connectivity Solutions division of Bel Fuse.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Leshan Radio
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
M39012/16-0014
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; IEC Conformity: NO; Body or Shell Style: PLUG;
R141.426.000
Radiall S A
Radiall S A's R141.426.000 BNC Connector features 0.05 dB Insertion Loss, 1.08 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it is a female receptacle with gold-plated contacts for solder termination on boards and panels.
5413631-1
TE Connectivity
TE Connectivity's 5413631-1 BNC Connector features 50 ohm impedance, polymethylpentene insulator, and bayonet coupling. Ideal for RF applications with a max frequency of 4 GHz, it offers durability up to 500 cycles and operates b/w -55°C to 85°C.
M39012/20-0503
Winchester Interconnect
M39012/20-0503 by Winchester Interconnect is a BNC connector with a low insertion loss of 0.3 dB and gold termination contact finish. It is MIL conformant and has a bayonet coupling type. This RF BNC connector is commonly used in applications up to 4 GHz, with a characteristic impedance of 50 ohm and right angle mounting style.
227676-1
TE Connectivity's 227676-1 is a BNC Connector with Bayonet coupling, 50 ohm impedance, and Polymethylpentene insulator. Ideal for RF applications up to 4 GHz, it features a durable zinc alloy shell, solder termination, and operates b/w -55°C to 85°C.
31-5431-2010
Amphenol
Amphenol 31-5431-2010 BNC Connector features: Insulation Resistance 5G ohm, Insertion Loss 0.2 dB, Dielectric Withstanding Voltage 1500VAC. Ideal for RF applications up to 4GHz with gold finish and durability of 500 cycles.
5413194-1
TE Connectivity's 5413194-1 BNC Connector features bayonet coupling, polymethylpentene insulator, and 75 ohm impedance. Ideal for RF applications up to 4 GHz, this right-angle jack connector with solder termination is UL certified for commercial use.
5-225395-7
TE Connectivity's 5-225395-7 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupled connector with PTFE insulator is MIL compliant and terminates via crimping for male contacts on cables.
5227161-2
TE Connectivity's 5227161-2 RF BNC Connector features a body length of 0.581", insulator resistance of 5G ohm, and bayonet coupling type. Ideal for commercial applications, this connector has a max operating frequency of 4GHz and can withstand temperatures from -55 to 85°C.
M39012/16-0101
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CLAMP SOLDER; Filter Feature: NO;
31-315
Amphenol's 31-315 BNC Connector has a body diameter of 0.562", insulation resistance of 5GΩ, and insertion loss of 0.2dB. It is commonly used in RF applications with characteristic impedance of 50Ω and max operating frequency of 4GHz.
2-5330061-1
TE Connectivity's 2-5330061-1 BNC Connector features Bayonet coupling, PTFE insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with RG 188 or RG 174 cables. MIL conformant, male contact gender, crimp termination, and suitable for temperatures from -65 to 165 °C.
M39012/24-0002
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: BAYONET; Additional Features: INSERTION LOSS MAX AT: 3 GHZ; APPLICABLE CABLES: RG 142, RG 400; Characteristic Impedance: 50 ohm;
1274571-1
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 2 GHz; Panel Mount: NO; DIN Conformance: NO;
1-1478402-0
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
R316.007.000
Radiall S A's R316.007.000 is a BNC connector with 1.41 dB insertion loss, silver termination contact finish, and bayonet coupling type. It is suitable for RG 58, RG 141, RG 142, and RG 223 cables and has a max operating frequency of 2 GHz.
M39012/16-0015
Amphenol's M39012/16-0015 BNC Connector features low 0.2 dB insertion loss, MIL conformity, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has bayonet coupling and PTFE insulator for reliable performance in cable installations.
B1112A1-ND3G-1-50
Amphenol B1112A1-ND3G-1-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and right angle mounting. Ideal for cable termination in male contact gender applications requiring crimp solder termination.
M39012/18-0102
Winchester Interconnect's M39012/18-0102 is a BNC RF connector with bayonet coupling, suitable for panel mounting. It features female contact gender, RG-58 cable compatibility, and jack body style. Ideal for straight mounting applications in RF systems requiring coaxial connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Trompeter Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved