Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Configuration: COMMON ANODE, 1.5 DIGITS WITH DECIMAL POINT; Display Height: 12.7 mm; Color: RED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Assy Fe
1+ parts
100+ parts
1k+ parts
10k+ parts
LED Displays TLR327 attributes and parameters. Explore more LED Displays devices from Toshiba
Color:
Configuration:
Display Height:
Maximum Forward Current:
JESD-609 Code:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
TLR327 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Daco Semiconductor
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1N4148WS
Surge Components
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Kec
SL2524
The Onsemi SL2524 is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -20 °C to 65°C, ideal for applications requiring green light at 8mm display height and up to 5 characters. Perfect for electronic devices needing clear numeric displays in various environments.
HDSP-5501-GG000
Broadcom
Broadcom's HDSP-5501-GG000 LED Display features COMMON ANODE configuration, 14.22mm display height, and HIGH EFFICIENCY RED color. With a peak wavelength of 635nm, it is ideal for SMART/NORMAL 7 SEG NUMERIC applications requiring a max forward current of 0.03A and operating temperatures ranging from -40 to 100°C.
HDSP-3601
HDSP-3601 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 566nm. It operates at temperatures from -40°C to 100°C, with a max forward current of 0.03A. Ideal for applications requiring high performance green color display with a height of 7.62mm and forward voltage up to 2.5V.
TIL312
Texas Instruments
TIL312 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has common anode configuration, 8mm display height, and max forward voltage of 2V. Ideal for applications requiring red color output in temperatures ranging from -25°C to 85°C.
HCMS-2961
Broadcom's HCMS-2961 is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -40°C to 85°C, has max forward voltage of 5.5V, and displays yellow color. Ideal for applications requiring compact, high-quality alphanumeric displays.
HDSP-0794
Hewlett Packard
SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; Display Height: 7.4 mm;
SLA9744
SLA9744 by Onsemi is a 16x16 Dot Matrix LED Display with common cathode configuration. It operates b/w -20 °C to 50°C, emitting red light at peak wavelength of 630nm. With a display height of 32mm, it finds applications in various LED display projects.
ACSC03-41SGWA-F01
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Display Height: 7.62 mm; Color: SUPER BRIGHT GREEN;
SLA9783
SLA9783 by Onsemi is a Common Anode LED Display with peak wavelength of 630nm. It features SMART/NORMAL 5x7 Dot Matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring a 15mm Red display, such as digital clocks or temperature indicators.
SL5125
SL5125 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25 °C to 70°C, emitting Green-Yellow/Red light at peak wavelength of 630nm. Ideal for applications requiring a display height of 14mm.
HDSP-A901
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .015 A; Color: GREEN; No. of Characters: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
5082-7663
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Yellow; JESD-609 Code: e1; Peak Wavelength (nm): 583;
HDLG-1414
Broadcom's HDLG-1414 LED display features 5x7 dot matrix, peak wavelength of 568nm, and green color. With 4 functions and 3.7mm height, it is ideal for temperature range -40 to 85°C applications.
DSM7UA56101
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
TIL370
TIL370 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has 4 characters, red color, and 13mm display height. With max forward voltage of 2.1V, it operates b/w -25°C to 85°C making it ideal for temperature-sensitive applications.
SA40-19SRWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Maximum Operating Temperature: 85 Cel; Color: SUPER BRIGHT RED; Minimum Operating Temperature: -40 Cel; Additional Features: IC COMPATIBLE;
SA36-11GWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Color: GREEN; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Maximum Forward Current: .025 A;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Yellow; Minimum Operating Temperature: -40 Cel; Display Height: 10.9 mm; No. of Characters: 1;
TIL324
TIL324 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has a display height of 13mm and max forward voltage of 3.5V. Ideal for applications requiring green light emission, operating b/w -25°C to 85°C temperature range.
HDSP-815E
HDSP-815E by Broadcom is a 7-segment numeric LED display with common anode configuration. It operates at temperatures ranging from -25°C to 85°C, with a peak wavelength of 635nm and max forward current of 0.025A. Ideal for applications requiring high efficiency red color displays with a height of 20mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLR312
Toshiba
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Color: RED; Display Height: 8.3 mm; Minimum Operating Temperature: -20 Cel;
TLR313
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 75 Cel; JESD-609 Code: e0; Maximum Forward Current: .015 A;
TLR328
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 700; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Display Height: 13 mm;
TLR308
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 15 mm; No. of Functions: 1; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 75 Cel;
TLR320
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Maximum Forward Current: .015 A; Minimum Operating Temperature: -30 Cel; No. of Functions: 2;
TLR326
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1.5 DIGITS WITH DECIMAL POINT; Display Height: 12.7 mm; No. of Functions: 1.5; Minimum Operating Temperature: -30 Cel;
TLR314
SIGN LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; No. of Functions: .5; Configuration: COMMON ANODE, 0.5 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .015 A;
TLR329
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700; JESD-609 Code: e0; Display Height: 13 mm;
TLR3010WG
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 65 Cel; Maximum Forward Voltage: 2.8 V; Color At Wavelength: Red;
TLR321
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Configuration: COMMON ANODE, 2 DIGITS; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 75 Cel;
TLR309
SIGN LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 0.5 DIGIT; No. of Functions: .5; Display Height: 9.4 mm; Maximum Forward Current: .035 A;
TLR322
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 7.6 mm; Minimum Operating Temperature: -30 Cel; No. of Functions: 2;
TLR325
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 12.7 mm; Maximum Forward Current: .02 A; Minimum Operating Temperature: -30 Cel; JESD-609 Code: e0;
TLR307
SIGN LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 0.5 DIGIT; Color: RED; No. of Functions: .5; Display Height: 9.4 mm;
TLR315
SIGN LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .015 A; No. of Functions: .5; Minimum Operating Temperature: -20 Cel; JESD-609 Code: e0;
TLR3010
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2.8 V; Peak Wavelength (nm): 700; Display Height: 15 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 4;
TLR306
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 75 Cel; JESD-609 Code: e0;
TLR323
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; No. of Functions: 2; Configuration: COMMON ANODE, 2 DIGITS; JESD-609 Code: e0;
TLR324
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color: RED; Maximum Operating Temperature: 75 Cel; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved