Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRANSISTOR OUTPUT SLOTTED SWITCH; Nominal Slot Width: 1.2 mm; Minimum Collector-emitter Breakdown Voltage: 35 V; No. of Functions: 1; Nominal On State Collector Current: 50 mA; Gap Size: 1.2 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Assy Fe
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Kepictronics
Transistor Outputs Slotted Switch TLP842 attributes and parameters. Explore more Transistor Outputs Slotted Switch devices from Toshiba
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Maximum Dark Current:
Maximum Forward Current:
Gap Size:
No. of Functions:
Nominal On State Collector Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Nominal Slot Width:
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Infineon Technologies
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Transys Electronics
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
OPB866T55
Qt Optoelectronics
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Nominal On State Collector Current: 1 mA; Output Circuit Type: Transistor; Maximum On State Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
TLP863
Toshiba
DARLINGTON OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: 2.2 mm; Nominal Slot Width: 2.2 mm; Maximum Operating Temperature: 70 Cel; No. of Functions: 1;
EE-SH3-GS
Omron
TRANSISTOR OUTPUT SLOTTED SWITCH; Maximum Dark Current: 200 nA; Nominal Slot Width: 3.4 mm; No. of Functions: 1; Nominal On State Collector Current: .5 mA; Maximum Operating Temperature: 85 Cel;
TCST1202
Temic Semiconductors
TRANSISTOR OUTPUT SLOTTED SWITCH; No. of Functions: 1; Maximum Forward Current: .06 A; Gap Size: 3.15 mm; Nominal On State Collector Current: 2 mA; Maximum Operating Temperature: 85 Cel;
TCPT1350X01
Vishay Intertechnology
The Vishay Intertechnology TCPT1350X01 is a single transistor output slotted switch with a max forward current of 0.025A and operating temperature range from -40°C to 125°C. Ideal for applications requiring a nominal slot width of 3mm, surface mounting feature, and a min collector-emitter breakdown voltage of 20V.
EE-SX670P
Omron EE-SX670P is a SINGLE transistor output slotted switch with 5mm slot width and gap size. Operating temperature ranges from -25°C to 55°C, making it ideal for industrial automation applications requiring precise sensing in harsh environments.
OPB880T55Z
Optek Technology
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 85 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE;
TLP834
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: 3 mm; Maximum On State Current: .02 A; Output Circuit Type: Transistor; Nominal Slot Width: 3 mm;
EE-SX198
Omron's EE-SX198 is a Transistor Output Slotted Switch with 0.5mA On State Collector Current, 0.05A Forward Current, and 3mm Slot Width. Ideal for applications requiring precise sensing in temperatures ranging from -25°C to 85°C.
GP1S562
Sharp Corporation
The Sharp Corporation GP1S562 is a Transistor Output Slotted Switch with 20mA On State Collector Current. It features a 3mm Slot Width and 35V Collector-emitter Breakdown Voltage. Ideal for applications requiring precise switching in environments ranging from -25°C to 85°C.
OPB350
Tt Electronics Plc
OPB350 by Tt Electronics Plc is a Transistor Output Slotted Switch with 3.5mA On State Collector Current and 0.05A Max Forward Current. It operates b/w -40°C to 85°C, with a Nominal Slot Width of 1.91mm. Ideal for applications requiring precise switching in environments with temperature variations.
EE-SX1070
Omron's EE-SX1070 is a Transistor Output Slotted Switch with 0.5mA On State Collector Current, 0.05A Max Forward Current, and 30V Min Collector-emitter Breakdown Voltage. Ideal for applications requiring precise sensing in environments ranging from -25°C to 95°C.
TLP831(F)
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .05 A; Maximum Response Time: .00005 s; Minimum Operating Temperature: -10 Cel; Configuration: SINGLE;
TCUT1350X01
Vishay Intertechnology's TCUT1350X01 is a Transistor Output Slotted Switch with COMMON COLLECTOR configuration. It has a Max Forward Current of 0.025A, operating temperature range from -40°C to 125°C, and a Nominal Slot Width of 3mm. Ideal for applications requiring precise sensing in harsh environments.
OPB610
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Nominal Slot Width: 3.81 mm; Configuration: SINGLE; Maximum On State Current: .001 A; Minimum Operating Temperature: -40 Cel;
OPB620
OPB620 by Tt Electronics Plc is a Transistor Outputs Slotted Switch with max on state voltage of 30V and nominal on state current of 30mA. It operates in temperatures from -40°C to 100°C, featuring a slot width of 4.83mm. Ideal for applications requiring precise switching control in various environments.
OPB380T11Z
OPB380T11Z by Tt Electronics Plc is a Transistor Output Slotted Switch with 30V On State Voltage, 1mA Collector Current, and 0.05A Forward Current. Ideal for applications requiring a SINGLE configuration, such as temperature sensing in environments ranging from -40°C to 85°C.
EE-SX674
Omron's EE-SX674 is a single transistor output slotted switch with a 5mm slot width and gap size. Operating temperature ranges from -25°C to 55°C, making it suitable for various industrial applications requiring precise object detection and position sensing.
EE-SPX417-P1
TRANSISTOR OUTPUT SLOTTED SWITCH; Nominal Slot Width: 17 mm; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel; No. of Functions: 1; Configuration: COMPLEX;
TLP867
DARLINGTON OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Output Circuit Type: Darlington; Maximum Dark Current: 250 nA; No. of Functions: 1; Configuration: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP841
TRANSISTOR OUTPUT SLOTTED SWITCH; Maximum Dark Current: 50 nA; Maximum Forward Current: .02 A; Minimum Collector-emitter Breakdown Voltage: 35 V; Gap Size: 5 mm; Nominal Slot Width: 5 mm;
TLP851
DARLINGTON OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: 5 mm; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .05 A; Configuration: SINGLE;
TLP825
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Minimum Collector-emitter Breakdown Voltage: 35 V; Gap Size: 3 mm; Nominal On State Collector Current: 50 mA;
TLP804
TRANSISTOR OUTPUT SLOTTED SWITCH; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; Gap Size: 3 mm; No. of Functions: 1;
TLP812
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .02 A; Maximum Dark Current: 100 nA; Nominal On State Collector Current: 20 mA; Minimum Operating Temperature: -25 Cel;
TLP822
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Nominal On State Collector Current: 50 mA; Configuration: SINGLE; No. of Functions: 1; Minimum Collector-emitter Breakdown Voltage: 35 V;
TLP810
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Minimum Collector-emitter Breakdown Voltage: 35 V; No. of Functions: 1; Configuration: SINGLE; Output Circuit Type: Transistor;
TLP826
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Gap Size: 5 mm; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel;
TLP801A
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Nominal Slot Width: 3 mm; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -25 Cel;
TLP813
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: 2.2 mm; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 35 V; Nominal Slot Width: 2.2 mm;
TLP805
TRANSISTOR OUTPUT SLOTTED SWITCH; Nominal Slot Width: 3 mm; Configuration: SINGLE; Gap Size: 3 mm; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .05 A;
TLP814
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .02 A; Gap Size: 1.5 mm; Configuration: SINGLE; Maximum Dark Current: 100 nA;
TLP818
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Minimum Collector-emitter Breakdown Voltage: 35 V; Nominal On State Collector Current: 50 mA; Gap Size: 5 mm; Maximum Operating Temperature: 85 Cel;
TLP809
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Output Circuit Type: Transistor; No. of Functions: 1; Maximum Forward Current: .05 A; Nominal Slot Width: 2 mm;
TLP824
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Nominal On State Collector Current: 50 mA; Maximum Operating Temperature: 75 Cel; Configuration: SINGLE; Minimum Operating Temperature: -10 Cel;
TLP803
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Gap Size: 5 mm; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel;
TLP815
TRANSISTOR OUTPUT SLOTTED SWITCH; No. of Functions: 1; Minimum Collector-emitter Breakdown Voltage: 35 V; Maximum Dark Current: 100 nA; Gap Size: 3 mm; Configuration: SINGLE;
TLP811
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Minimum Collector-emitter Breakdown Voltage: 35 V; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; Nominal Slot Width: 5 mm;
TLP800A
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; Gap Size: 3 mm; Nominal On State Collector Current: 50 mA;
TLP802
TRANSISTOR OUTPUT SLOTTED SWITCH; Mounting Feature: THROUGH HOLE MOUNT; No. of Functions: 1; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .05 A; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved