Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP3241(TP15,F) is a MOSFET solid state relay with DC input. It operates b/w 25-60°C, making it suitable for various applications. With a compact size of 2.04mm length and 1.8mm height, it is ideal for space-constrained designs in industries like automotive and consumer electronics.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$10.294
Ampacity Inc.
$20.100
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Aranea Global
MOSFET technology provides efficient and reliable switching, making this solid state relay suitable for various applications.
With a high maximum operating temperature, this solid state relay can withstand elevated temperatures without compromising performance.
Compact design with a low height of 1.8 mm allows for easy installation in tight spaces or on densely populated PCBs.
The solid state relay can operate effectively even at lower temperatures, ensuring reliable performance in a wide range of environments.
DC input compatibility makes this solid state relay suitable for applications that require direct current control signals.
The small length of 2.04 mm contributes to the overall compactness of the relay, making it ideal for space-constrained applications.
Solid State Relays TLP3241(TP15,F) attributes and parameters. Explore more Solid State Relays devices from Toshiba
Input Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Circuit Type:
Height:
Length:
Sub-Category:
TLP3241(TP15,F) Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
PCN Packaging - Mult Dev Pkg Chgs 10/Feb/2020
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Itt Semiconductor
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
AQW212AX
Panasonic
The Panasonic AQW212AX is a solid state relay with 2 separate elements, max. forward current of 0.05A, and transistor output SSR type. It operates b/w -40°C to 85°C, has max. on-state resistance of 2.5 ohm, isolation voltage of 1500V, and max. on-state current of 0.6A. Ideal for applications requiring reliable switching in industrial automation systems.
TLP176AM(E
Toshiba
Toshiba's TLP176AM(E is a single solid state relay with built-in diode, featuring a max forward current of 0.0195A and on-state resistance of 2 ohm. Ideal for applications requiring high isolation voltage (3750V) and operating temperatures ranging from -20°C to 85°C.
HD6050-10
Sensata Technologies
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Control Current: .003 A; Minimum Operating Temperature: -40 Cel; Output Circuit Type: Back to Back SCR; Height: 27.9 mm;
ASSR-4110-003E
Broadcom
Broadcom's ASSR-4110-003E is a complex solid state relay with a control current of 0.003 A and max forward current of 0.02 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85 °C and offers an isolation voltage of 3750 V. Ideal for DC input applications, this transistor output SSR has a max on-state resistance of 25 ohm and can handle up to 0.12 A on-state current.
D2425-10
Crydom
Crydom's D2425-10 is a complex solid state relay with trigger output SSR. It has a max on-state current of 25A, control voltage of 3V, and isolation voltage of 4000V. Ideal for DC input applications in temperatures ranging from -40°C to 80°C.
CPC1963GS
IXYS Corporation
TRIGGER OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Configuration: SINGLE; No. of Elements: 1; Maximum Isolation Voltage: 3750 V;
DRA-CN024D05
TRANSISTOR OUTPUT SSR; Maximum On State Current: 3.5 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; Maximum Operating Temperature: 60 Cel; Additional Features: UL RECOGNIZED;
ASSR-1410-003E
Broadcom's ASSR-1410-003E is a complex solid state relay with 0.003 A control current, 0.02 A max forward current, and 1 ohm max on-state resistance. Ideal for DC input applications requiring MOSFET output circuit type and 3750 V isolation voltage.
TLP172AM(TPR,E
Toshiba's TLP172AM(TPR,E is a solid state relay with 0.025A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single diode configuration and transistor output SSR technology in temperatures ranging from -20°C to 100°C.
CPC1016NTR
Littelfuse
CPC1016NTR by Littelfuse is a SINGLE MOSFET SSR with 0.002 A control current, 0.05 A max forward current, and 16 ohm on-state resistance. Ideal for DC input applications requiring high isolation voltage of 1500 V, operating b/w -40 to 85 °C in compact spaces due to its 2.18 mm height and 4.1 mm length.
TLP3407SRA(TP,E
Solid State Relays;
SSRT240A25
Potter & Brumfield
Potter & Brumfield SSRT240A25 is a Triac solid state relay with 90V AC control voltage. It operates b/w -30°C to 80°C, measuring 44mm in length and 21mm in height. Ideal for applications requiring precise switching in industrial machinery and HVAC systems.
AQV253
AQV253 by Panasonic is a solid state relay with a max forward current of 0.05 A and a max operating temperature of 85°C. It has a transistor output SSR configuration and can handle up to 1500 V of isolation voltage. This relay is commonly used in various applications requiring reliable switching capabilities.
LCA110LS
The Littelfuse LCA110LS is a SINGLE solid state relay with 0.002 A control current and 0.05 A max forward current. Featuring a TRANSISTOR OUTPUT SSR, it has a MOSFET output circuit type and operates b/w -40 to 85 °C. Ideal for DC input applications, it offers 3750 V isolation voltage and 35 ohm on-state resistance, making it suitable for various industrial automation tasks.
CPC1150N
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 1500 V; Length: 4.1 mm; Maximum On State Resistance: 50 ohm;
D2440DE-10
Hbcontrols
TRIGGER OUTPUT SSR; Maximum On State Current: 40 A; No. of Elements: 2; Additional Features: UL APPROVED, VDE APPROVED; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Maximum Operating Temperature: 80 Cel;
TLP241A(TP1,F(O
TRANSISTOR OUTPUT SSR;
G3VM-201G1
Omron
Omron's G3VM-201G1 is a DC input TRANSISTOR OUTPUT SSR with 0.002 A control current, MOSFET output circuit type, and 1500 V max isolation voltage. At just 2.1 mm height and operating b/w -40 to 85 °C, it's ideal for compact electronic applications requiring precise voltage control.
PVT322PBF
Infineon Technologies
The Infineon Technologies PVT322PBF is a Solid State Relay with separate configuration, 2 elements. It has a control current of 0.002 A and max forward current of 0.025 A. With optoelectronic type as transistor output SSR, it operates at temperatures from -40 to 85 °C. Ideal for DC input applications requiring MOSFET output circuit type and high isolation voltage up to 4000 V.
SDI2415R
Crydom's SDI2415R is a SINGLE solid state relay with 0.01 A control current and 1.5 A max on-state current. Ideal for DC input applications, it offers trigger output SSR optoelectronics and back-to-back SCR output circuit type. With a compact design of 21.6mm length and 4.8mm height, it operates b/w -30°C to 80°C temperature range, providing up to 3750V isolation voltage for various industrial uses.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP3406S(TP,E
Toshiba's TLP3406S(TP,E is a single solid state relay with built-in diode, featuring a control current of 0.005A and max forward current of 0.02A. With MOSFET output circuit type, it operates b/w -20°C to 100°C, making it ideal for DC input applications requiring high isolation voltage up to 500V.
TLP3406S(TP,E(O
TLP3406SRH(TP,E
TLP3406SRHA(TP,E
TLP3406SRL(TP,E
TLP3406SRL(TP,E(O
TLP3406SRH(TP,E(O
TLP3545A(TP1,F(O
TLP3240(TP15,F)
Toshiba's TLP3240(TP15,F) is a MOSFET solid state relay with 1.15V control voltage, operating b/w 25-60°C. At just 1.8mm height and 2.04mm length, it's ideal for DC input applications requiring compact and efficient switching solutions in various electronic devices.
TLP3545A(TP1,F
Toshiba's TLP3545A(TP1,F is a solid state relay with a built-in diode, featuring a control current of 0.005 A and max forward current of 0.025 A. With a MOSFET output circuit type, it offers high isolation voltage of 2500 V, making it ideal for DC input applications requiring up to 4 A on-state current in compact spaces.
TLP3555A(TP1,F
Toshiba's TLP3555A(TP1,F is a single solid state relay with a control current of 0.03 A and max forward current of 3 A. Featuring MOSFET output circuit type, it operates b/w -40 to 85°C, with an isolation voltage of 2500 V. Ideal for DC input applications, this transistor output SSR has a compact size suitable for surface mounting methods.
TLP3122A(TPLE(O
TLP3555A(TP1,F(O
TRANSISTOR OUTPUT SSR; Mounting Feature: SURFACE MOUNT; Maximum On State Current: 3 A; Control Current: .0195 A; Control Voltage: 1.8 V; Additional Features: UL RECOGNIZED;
TLP3555A(TP1F(O
TRANSISTOR OUTPUT SSR; Mounting Feature: SURFACE MOUNT; Control Voltage: 1.8 V; Input Type: DC; Packing Method: TR; Output Circuit Type: MOSFET;
TLP3122A(TPL,E
TLP3122(F)
Solid State Relays; Height: 2.1 mm; Input Type: DC; Length: 3.9 mm; Control Voltage: 1 V; Minimum Operating Temperature: 25 Cel;
TLP3122A(E
TLP3556A(TP1,F
TLP3556A(TP1,F(O
TLP3419(TP,F
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved