Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP241A(D4,F) is a solid state relay with a control current of 0.005 A and max on-state current of 2 A. Featuring a MOSFET output circuit type, it offers high isolation voltage of 5000 V, making it ideal for DC input applications requiring reliable switching in temperatures ranging from -20 to 85°C.
Median Price
$2.220
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.210
100+ parts
$1.210
1k+ parts
$0.947
10k+ parts
$0.887
DigiKey
$2.230
$1.229
$1.009
$0.882
Nova Conductors
-
Ampacity Inc.
$3.980
Continental Prestige Electronics
Argo Parts USA
Aranea Global
The built-in diode simplifies installation and protects the circuit from reverse current flow.
Low control current requirement ensures efficient operation and minimal power consumption.
Capable of handling moderate currents for a variety of applications.
Utilizing a transistor output ensures reliable switching performance.
MOSFET output circuit offers fast and efficient switching.
High operating temperature range allows for use in various environments.
Compact design enables easy integration into different systems.
Wide temperature range ensures reliable performance even in harsh conditions.
Low control voltage requirement for efficient operation.
Magazine packing makes handling and storage convenient for large quantities.
Low on-state resistance minimizes power loss and heat generation.
High isolation voltage ensures safe operation and protection of the control circuit.
DC input type is commonly used and compatible with many control systems.
Compact length allows for flexible placement in different applications.
Through-hole mounting offers secure and reliable installation.
Capable of handling higher currents for more demanding applications.
Solid State Relays TLP241A(D4,F attributes and parameters. Explore more Solid State Relays devices from Toshiba
Additional Features:
Configuration:
Control Current:
Control Voltage:
Maximum Forward Current:
Input Type:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Resistance:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
Packing Method:
TLP241A(D4,F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Microsemi
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
A1240
Sensata Technologies
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Input Type: AC; Height: 22.9 mm; Configuration: SINGLE WITH BUILT-IN RESISTOR; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING;
LVD75E80
Crydom
TRANSISTOR OUTPUT SSR;
TLP227G-2
Toshiba
Toshiba's TLP227G-2 is a solid state relay with 2 separate elements, each with built-in diode. It has a max forward current of 0.025A and optoelectronic type as transistor output SSR. With max isolation voltage of 2500V, it operates b/w -40 to 85°C. Ideal for applications requiring reliable switching in industrial automation and control systems.
CPC1002NTR
Littelfuse
CPC1002NTR by Littelfuse is a SINGLE MOSFET SSR with 0.00055 A control current, 0.05 A max forward current, and 0.7 A max on-state current. Ideal for DC input applications, it offers 1500 V isolation voltage, operates b/w -40 to 85 °C, and has a compact size of 4.1mm length and 2.18mm height.
SSR-240D50
TE Connectivity
TE Connectivity's SSR-240D50 is a COMPLEX solid state relay with trigger output. It has a max supply voltage of 32V, forward current of 0.015A, and isolation voltage of 4000V. Ideal for chassis mounting applications, it can handle up to 50A on-state current at an operating temperature range from -30°C to 80°C.
AQY210EHAX
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Input Type: DC; Output Circuit Type: MOSFET; Control Voltage: 1.14 V; JESD-609 Code: e0;
TLP172AM(E(O
Toshiba's TLP172AM(E(O is a solid state relay with 0.025A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single SSR with built-in diode like temperature control systems due to its -20 to 100 °C operating range.
CPC1035NTR
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Control Current: .002 A; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A; Maximum Forward Current: .05 A;
MCMX60D5
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: .1 ohm; Configuration: SINGLE; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED;
TLP3407S(TP,E(O
TLP172AM(TPR,E(O
Toshiba's TLP172AM(TPR,E(O is a solid state relay with 0.025A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single configuration with built-in diode, such as temperature control systems or industrial automation equipment.
D53TP50D-10
Hbcontrols
TRIGGER OUTPUT SSR; Terminal Finish: TIN; Input Type: AC; No. of Elements: 1; Maximum Forward Current: .025 A; Minimum Operating Temperature: -40 Cel;
CPC1979J
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT ; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .1 A; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 2500 V;
D1D40
TRANSISTOR OUTPUT SSR; Mounting Feature: PANEL MOUNT; Terminal Finish: Tin (Sn); Maximum On State Resistance: .025 ohm; Minimum Operating Temperature: -40 Cel; Height: 22.6 mm;
G3VM-31BR
Omron
Omron's G3VM-31BR is a DC input TRANSISTOR OUTPUT SSR with 5A max on-state current, 0.04 ohm max on-state resistance, and 2500V max isolation voltage. Ideal for applications requiring single solid state relay with built-in diode in temperatures ranging from -40 to 85°C.
G3MB-202PEG-4-DC20MA
Omron's G3MB-202PEG-4-DC20MA is a SINGLE solid state relay with 2A max on-state current, 0.02A max forward current, and 2500V max isolation voltage. Ideal for trigger output SSR applications with temp range -30 to 80°C.
10PCV2425
TRIGGER OUTPUT SSR; Input Type: DC; Output Circuit Type: SCR; Maximum Operating Temperature: 80 Cel; Control Voltage: 2 V; Maximum On State Current: 25 A;
PFE480D25R
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; Control Current: .015 A; Length: 38.1 mm; Maximum On State Current: 25 A;
CPC1909J
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .1 A; Minimum Operating Temperature: -40 Cel; Maximum On State Resistance: .1 ohm; Maximum On State Current: 6.5 A;
ASSR-1228-502E
Broadcom
Broadcom's ASSR-1228-502E is a solid state relay with separate, 2-element configuration. It features a control current of 0.003 A and max forward current of 0.02 A. Ideal for applications requiring low on-state resistance and high isolation voltage up to 3750 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP241A(TP1,F(O
TLP241A(TP1,F
Toshiba's TLP241A(TP1,F is a solid state relay with a control current of 0.005 A and max forward current of 0.025 A. Featuring a MOSFET output circuit type, it offers high isolation voltage of 5000 V. Ideal for DC input applications, this SSR has a compact design suitable for surface mounting in various electronic devices.
TLP222A(F)
Toshiba's TLP222A(F) is a solid state relay with a max forward current of 0.025A and optoelectronic type as transistor output SSR. With a max isolation voltage of 2500V, it operates b/w -40°C to 85°C. Ideal for applications requiring fast response times and low on-state resistance in through-hole mounting configurations.
TLP227G
Toshiba's TLP227G is a single solid state relay with built-in diode, featuring a max forward current of 0.025A and on-state resistance of 35 ohm. Ideal for applications requiring high isolation voltage (2500V) and operating temperatures ranging from -40 to 85°C.
TLP241BF(D4LF4,F
TLP227GA-2
Toshiba's TLP227GA-2 is a solid state relay with 2 separate elements, max forward current of 0.025A, and transistor output. Ideal for applications requiring isolation voltage up to 2500V, operating b/w -20°C to 65°C, with max on-state resistance of 35 ohm and current of 0.1A.
TLP227GA
Toshiba's TLP227GA is a SINGLE configuration TRANSISTOR OUTPUT SSR with 0.025A max forward current. With 35 ohm max on-state resistance and 2500V isolation voltage, it operates b/w -20°C to 65°C. Ideal for applications requiring reliable solid state relay performance in various temperature conditions.
TLP241AF(TP4,F
Toshiba's TLP241AF(TP4,F is a solid state relay with a control current of 0.005A and max on-state current of 2A. Featuring MOSFET output circuit type, it operates b/w -20 to 85°C making it ideal for DC input applications in various industries.
TLP227G-2(TP1,N,F)
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Current: .12 A; Control Current: .005 A; No. of Elements: 2; Input Type: DC;
TLP240A(F(O
Toshiba TLP240A(F(O is a solid state relay with 0.005 A control current, 0.025 A forward current, and 2 ohm on-state resistance. It features a MOSFET output circuit type and 5000 V isolation voltage. Ideal for DC input applications requiring high isolation voltage in compact spaces due to its small height of 3.65 mm and length of 6.4 mm with through-hole mounting capability.
TLP240D(F
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Control Current: .005 A; Control Voltage: 1.1 V; Height: 3.65 mm; Maximum Forward Current: .025 A;
TLP240DF
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Control Current: .005 A; Height: 3.65 mm; No. of Elements: 1; Maximum On State Current: .25 A;
TLP241BF(LF4,F
TLP241B(D4,LF5,F
TLP206G(TP,F)
Solid State Relays; Maximum Operating Temperature: 65 Cel; Control Current: .005 A; Input Type: DC; Minimum Operating Temperature: -20 Cel; Output Circuit Type: MOSFET;
TLP240A(F
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Length: 6.4 mm; Output Circuit Type: MOSFET; Packing Method: MAGAZINE;
TLP240AF
TRANSISTOR OUTPUT SSR; Configuration: SINGLE WITH BUILT-IN DIODE; No. of Elements: 1; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED; Maximum Forward Current: .025 A;
TLP241A(F
Toshiba's TLP241A(F is a solid state relay with a control current of 0.005 A and max forward current of 0.025 A. It features a MOSFET output circuit type, 2A max on-state current, and 5000V isolation voltage. Ideal for DC input applications requiring high reliability in compact spaces.
TLP240A(D4,F
Toshiba's TLP240A(D4,F is a solid state relay with a control current of 0.005 A and max forward current of 0.025 A. Featuring a MOSFET output circuit type, it offers 5000 V isolation voltage for DC input applications. Ideal for through hole mounting, this SSR operates b/w -20 to 65 °C, making it suitable for various industrial automation and control systems.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved