Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP2361(V4,E optocoupler features a single configuration with max. forward current of 0.01A, ideal for logic IC output applications. With a min. supply voltage of 2.7V and max. operating temp of 125°C, it offers fast response time of 3ns and high isolation voltage of 3750V, making it suitable for surface mount installations at data rates up to 15MBps.
Median Price
$0.795
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.470
100+ parts
-
1k+ parts
10k+ parts
$0.373
DigiKey
$1.120
$0.462
$0.392
Nova Conductors
$0.425
Vyrian
Semtec, LLC
Corohmni
$0.047
Aztec Data Supply Inc.
$0.140
Semicontronic
$0.245
$0.239
$0.238
Advanced Electronics
$0.398
$0.378
Continental Prestige Electronics
$0.417
Argo Parts USA
$0.412
Netroflash
$0.404
$0.395
Robosynatics
$1.557
Lucentia Tech
Perfect Parts
Single configuration makes it easy to implement and reduces complexity in the circuit design.
The high maximum forward current allows for reliable signal transmission.
Specifically designed for logic IC outputs, ensuring compatibility and accuracy in data transmission.
Low minimum supply voltage requirement saves power and allows for operation in a variety of systems.
High maximum operating temperature ensures stability and reliability in harsh environments.
Fast response time allows for quick data transmission and minimizes latency.
Wide range of minimum operating temperature makes it suitable for use in extreme cold conditions.
High isolation voltage provides safety and protects sensitive components from voltage surges.
High data rate allows for fast and efficient data transmission between components.
Surface mount feature simplifies installation and saves space on the circuit board.
The high maximum on-state current ensures reliable performance and signal integrity.
Optocoupler Circuit Outputs TLP2361(V4,E attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Toshiba
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Nominal Response Time:
Minimum Supply Voltage:
TLP2361(V4,E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Dev Marking Chg 1/Dec/2020
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Motorola
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
STMicroelectronics
Onsemi
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Transys Electronics
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HCPL-3120-500E
Broadcom
HCPL-3120-500E by Broadcom is a COMPLEX optocoupler with 0.016A forward current, 15V min supply voltage, and 100°C max operating temp. Ideal for logic IC output applications due to its 500ns response time, -40 to 100°C operating range, and high isolation voltage of 3750V.
HCPL-5231
Agilent Technologies
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 2; Nominal Data Rate: 5 MBps; Maximum Power Dissipation: .4 W; No. of Functions: 2;
FOD8160R2
Fairchild Semiconductor
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Supply Voltage: 5.5 V; Minimum Operating Temperature: -40 Cel; No. of Elements: 1;
FODM453R2V
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .025 A; Maximum Power Dissipation: .1 W; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED, VDE APPROVED;
TLP2366(V4-TPL,E
Toshiba
Toshiba's TLP2366(V4-TPL,E is a single optocoupler with max. forward current of 0.025A and min. supply voltage of 2.7V, ideal for logic IC output applications. With a response time of 40ns, max isolation voltage of 3750V, and data rate of 20MBps, it operates b/w -40 to 125°C in surface mount configurations.
HCPL-063A-500E
Broadcom's HCPL-063A-500E is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.01 A and an isolation voltage of 3750 V, suitable for logic IC output applications. With a nominal data rate of 10 MBps and operating temperature range from -40 to 85 °C, it offers reliable performance in various electronic systems.
H11L1
Isocom Components
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Power Dissipation: .25 W; No. of Elements: 1; Configuration: SINGLE;
TLP2361(V4,E
6N138S
6N138S by Onsemi is a single optocoupler with max. forward current of 0.02A and isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with max. on-state current of 0.06A in surface mount configuration.
6N139M
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Maximum On State Current: .06 A;
HCPL2731
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE;
TLP2358(TPL,E(T
Toshiba's TLP2358 optocoupler has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 15ns. Ideal for logic IC output applications due to its single configuration and surface mounting feature.
HCPL-2730
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Configuration: SEPARATE, 2 CHANNELS WITH BUILT-IN RESISTOR; Minimum Supply Voltage: 4.5 V; Additional Features: TTL COMPATIBLE, UL RECOGNIZED;
HCPL-0701-500
Broadcom's HCPL-0701-500 is a single optocoupler with logic IC output. It features a max forward current of 0.012A, min supply voltage of 4.5V, and min operating temp of 0°C. Ideal for applications requiring high isolation voltage (3750V) in surface mount configurations.
TLP5214
Toshiba's TLP5214 is a linear IC output optocoupler with a min supply voltage of 15V and max forward current of 0.25A. With a response time of 32ns, it is ideal for applications requiring high-speed signal transmission in complex circuit configurations. Operating b/w -40°C to 110°C, it offers reliable performance in various electronic systems.
TLP2362(TPR,E)
Toshiba's TLP2362(TPR,E) optocoupler features a max forward current of 0.025A, logic IC output type, and 3750V isolation voltage. Ideal for applications requiring fast response time (30ns), such as in high-speed communication systems or industrial automation equipment.
HCPL2631SM
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED;
TLP2710
Toshiba's TLP2710 is a single optocoupler with max. forward current of 0.008A, ideal for logic IC outputs. With a min. supply voltage of 2.7V and max. isolation voltage of 5000V, it operates b/w -40 to 125°C, offering a nominal response time of 11ns at a data rate of 5MBps for surface mount applications.
HCPL0453
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Voltage: 1.8 V; Minimum Current Transfer Ratio: 15 %;
HCPL-063L-060E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Minimum Supply Voltage: 2.7 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP2361(TPL,E
Toshiba's TLP2361(TPL,E is a single optocoupler with max. forward current of 0.01A, ideal for logic IC output applications. It operates b/w -40 to 125°C, offers 3750V isolation voltage, and has a response time of 3ns. Suitable for surface mounting with a data rate of 15MBps.
TLP2361(V4-TPL,E
Toshiba's TLP2361(V4-TPL,E is a single optocoupler with max. forward current of 0.01A and isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40 to 125°C with a response time of 3ns, making it suitable for high-speed data transmission at 15MBps.
TLP2361(E(T
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Supply Voltage: 2.7 V; No. of Elements: 1; Configuration: SINGLE;
TLP2361(E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Nominal Data Rate: 15 MBps; Maximum On State Current: .01 A; Maximum Isolation Voltage: 3750 V; No. of Functions: 1;
TLP2361
Toshiba's TLP2361 is a single optocoupler with a max forward current of 0.01A and an isolation voltage of 3750V. Ideal for logic IC output applications, it operates b/w -40°C to 125°C with a response time of 3ns, making it suitable for high-speed data transmission at up to 15MBps.
TLP2361(TPRE
Toshiba's TLP2361(TPRE is a single optocoupler with max. forward current of 0.01A, ideal for logic IC outputs. It operates b/w -40 to 125°C, offers 3750V isolation voltage, and has a fast response time of 3ns. Suitable for surface mount applications requiring high isolation and low power consumption.
TLP2361(V4-TPLE(T
Toshiba's TLP2361(V4-TPLE(T optocoupler features 0.01A max forward current, 3750V isolation voltage, and 15MBps data rate. Ideal for logic IC output applications with a response time of 3ns, operating b/w -40°C to 125°C in surface mount configurations.
TLP250HF
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 3750 V; No. of Elements: 1; Maximum Forward Current: .02 A; Nominal Response Time: 50 ns;
TLP2361(TPL,E(O
Toshiba's TLP2361 optocoupler has a max forward current of 0.01A, isolation voltage of 3750V, and response time of 3ns. Ideal for logic IC output applications with a supply voltage as low as 2.7V, operating b/w -40 to 125°C, and data rate up to 15MBps in surface mount configurations.
TLP2362(TPL,E(T
Toshiba's TLP2362(TPL,E(T optocoupler features a single configuration with 0.025 A max forward current. Ideal for logic IC output applications, it operates b/w -40 to 125 °C and offers 3750 V isolation voltage. With a data rate of 10 MBps, it is suitable for various electronic circuits requiring high-speed signal transmission.
TLP250H(D4,F)
LOGIC IC OUTPUT OPTOCOUPLER;
TLP2766A(TP4,E
Toshiba's TLP2766A(TP4,E is a single optocoupler with max. forward current of 0.025 A, ideal for logic IC output applications. It operates b/w -40 to 125°C, offers 5000 V isolation voltage, and has a response time of 5 ns. Suitable for surface mounting with a nominal data rate of 20 MBps.
TLP2766A(TP,E
Toshiba's TLP2766A(TP,E is a single optocoupler with max. forward current of 0.025 A, ideal for logic IC output applications. With a min. supply voltage of 2.7 V and max. isolation voltage of 5000 V, it operates b/w -40 to 125 °C, offering fast response time of 5 ns at a data rate of 20 MBps.
TLP250H(TP1,F)
Toshiba's TLP250H(TP1,F) is a single optocoupler with max. forward current of 0.02A, providing logic IC output. With max. isolation voltage of 3750V, it operates b/w -40°C to 125°C, ideal for surface mount applications requiring fast response time of 50ns.
TLP250H(TP1F)
Toshiba's TLP250H(TP1F) is a single optocoupler with max. forward current of 0.02A, isolation voltage of 3750V, and operating temp. range from -40 to 125°C. Ideal for logic IC output applications requiring fast response time (50ns), it comes in surface mount packaging for easy installation.
TLP2770(TP,E
Toshiba's TLP2770(TP,E optocoupler offers 5000V isolation voltage, 32ns response time, and 20MBps data rate. Ideal for logic IC output applications with a single configuration, operating b/w -40 to 125°C.
TLP2770(TP,E(O
Toshiba's TLP2770(TP,E(O optocoupler features 5000V isolation voltage, 20MBps data rate, and -40 to 125°C operating temperature range. Ideal for logic IC output applications requiring fast response time of 1.3ns in a surface mount configuration.
TLP2766A(E
Toshiba TLP2766A(E is a single optocoupler with 0.025A forward current, ideal for logic IC outputs. It operates b/w -40 to 125°C, offers 5000V isolation voltage, and has a response time of 5ns. Suitable for surface mount applications with a data rate of 20MBps.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved