Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSOF; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Switching Regulators & Controllers TB7101AF(T5L3.3,F) attributes and parameters. Explore more Switching Regulators & Controllers devices from Toshiba
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
TB7101AF(T5L3.3,F) Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LL4148
Weitronic Enterprise
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM2594M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS552882QWRPMRQ1
TPS552882QWRPMRQ1 by Texas Instruments is a 26-terminal switching regulator with a 12V nominal input/output voltage, operating b/w -40 to 150°C. It utilizes current-mode control and pulse width modulation technique for buck-boost configuration, supporting up to 6.35A output current at a max frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact chip carrier package style.
L6562ADTR
L6562ADTR by STMicroelectronics is a voltage-mode power factor controller with a nominal voltage of 12V and max output current of 0.8A. This switching regulator in small outline package shape is ideal for applications requiring efficient power management and control using pulse width modulation technique. With surface mount capability, it offers precise regulation for various electronic devices.
IR1155STRPBF
International Rectifier
POWER FACTOR CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Current (Isup): 13 mA;
LT1054IS8#PBF
Analog Devices
LT1054IS8#PBF by Analog Devices is a small outline switched capacitor regulator with 8 terminals. It operates b/w -40 to 85°C, has a max input voltage of 15V, and nominal output voltage of -5V. Ideal for industrial applications requiring a compact, high-frequency bipolar technology-based switching regulator.
UCC28600DR
UCC28600DR by Texas Instruments is a switching regulator with a max output current of 1.2A and a max switching frequency of 130kHz. It is commonly used in industrial applications for controlling power supply voltages efficiently.
EN5322QI-T
Enpirion
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54360BDDAR
TPS54360BDDAR by Texas Instruments is a switching regulator with 3.5A output current, 1V min output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design with small outline package style.
LT8614IUDC#TRPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2675M-12
LM2675M-12 by Texas Instruments is a voltage-mode switching regulator with 1A output current and 260kHz max switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 6.5V to 40V and an output voltage of 12V.
TPS5430DDAR
TPS5430DDAR by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and pulse width modulation control technique.
TPS62933PDRLR
TPS62933PDRLR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output voltage of 22V and current up to 3A, using pulse width modulation for control. Ideal for applications requiring efficient power conversion in compact spaces.
ST1S10PHR
ST1S10PHR by STMicroelectronics is a switching regulator with max output current of 3A and max switching frequency of 1100kHz. It operates in buck configuration, supports pulse width modulation control technique, and has a small outline package style. Ideal for applications requiring efficient voltage regulation in compact spaces.
LM2674MX-3.3/NOPB
LMZ14203HTZ
LMZ14203HTZ by Texas Instruments is a voltage-mode switching regulator with 3A output current, ideal for automotive applications. It operates b/w -40°C to 125°C, accepting input voltages from 6V to 72V and providing a stable 12V output. This small outline package with gull wing terminals is surface mountable and designed for efficient power management in compact spaces.
LTM4644EY#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5122MHE/NOPB
LM5122MHE/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages ranging from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
LM22675MR-ADJ/NOPB
LM22675MR-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
LM2594HVM-5.0/NOPB
LM2594HVM-5.0/NOPB by Texas Instruments is a switching regulator with a max output voltage of 37V, ideal for automotive applications. It operates b/w -40 to 125°C, with a max output current of 0.5A and control mode in voltage-mode PWM technique.
LMZM33602RLRR
LMZM33602RLRR by Texas Instruments is a switching regulator with 18 terminals, operating temperature range of -40 to 105°C, and output current up to 2A. Ideal for industrial applications requiring a compact design, it offers PWM control technique, buck-boost configuration, and a max switching frequency of 1200 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TB7100F
Toshiba
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
TB7100F(TE85L)
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DFP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB7101AF(T5L1.2,F)
TB7101AF(T5L1.5,F)
TB7101AF(T5L1.8,F)
TB7101AF(T5L2.5,F)
TB7101F(T5L1.2,F)
TB7101F(T5L1.5,F)
TB7101F(T5L1.8,F)
TB7101F(T5L2.5,F)
TB7101F(T5L3.3,F)
TB7102AF(TE85L)
BATTERY CHARGE CONTROLLER; No. of Terminals: 8; Package Code: DFP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
TB7102AF(TE85L,F)
TB7102F(TE85L,F)
TB7106F(TE12L,Q)
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOF; Package Shape: SQUARE; Surface Mount: YES;
TB7107FN(TE85L,F)
TB7109F(TE12L,Q)
TB7110F(TE12L,Q)
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved