Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TB6612FNG,C,8,EL is a Motion Control IC with 2 functions. It operates at 3-5.5V and can handle up to 3.2A output current. Ideal for brush DC motor control applications due to its compact size and BCDMOS technology.
Median Price
$1.845
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$1.148
100+ parts
$0.986
1k+ parts
$0.975
10k+ parts
-
Farnell
$1.550
$1.000
$0.713
DigiKey
$1.820
$1.083
$0.951
$0.881
Mouser Electronics
$1.870
$1.120
$1.010
$0.931
Newark
$2.130
$1.320
Chip1Stop
$2.206
$1.208
$0.886
Element14
$2.510
$1.750
Verical
Nova Conductors
$1.188
TME
$2.340
$1.670
Vyrian
Semicontronic
$0.800
$0.780
$0.776
Aranea Global
$1.164
$1.118
Continental Prestige Electronics
Argo Parts USA
Corohmni
$6.556
Advanced Electronics
$21.528
$20.452
Aztec Data Supply Inc.
$23.920
Perfect Parts
iodParts Technologies Inc.
$1.041
Eastek
$1.250
Infinite Electronics LLP (Excess)
Robosynatics
$0.594
Lucentia Tech
PLASTIC/EPOXY material is durable and cost-effective, making the product long-lasting and affordable.
Surface mount capability allows for easy and efficient installation on circuit boards.
With 2 functions, this product offers versatility and functionality for various motion control applications.
Operating at 3V ensures compatibility with standard power sources, making it easy to integrate into existing systems.
With a maximum operating temperature of 85°C, this product can withstand high temperatures without compromising performance.
BCDMOS technology offers high efficiency and low power consumption, making the product energy-efficient and reliable.
Motion Control ICs TB6612FNG,C,8,EL attributes and parameters. Explore more Motion Control ICs devices from Toshiba
Additional Features:
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
TB6612FNG,C,8,EL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Promax-johnton
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Panjit International
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
IKCM15F60GAXKMA1
IKCM15F60GAXKMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 30A. Ideal for AC motor control applications in industrial settings due to its temp range of -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
FSB50760SFS
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Qualification: Not Qualified;
DRV8803PWPR
DRV8803PWPR by Texas Instruments is a motion control IC with a nominal voltage of 24V, suitable for industrial applications. It features a max output current of 0.02A and can operate in temperatures ranging from -40 to 85°C. With a compact rectangular package style and surface-mount capability, it offers precise control for stepper motor systems.
DRV8833PW
DRV8833PW by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage of 2.7-10.8V, and max output current of 2A. Ideal for brush DC motor control applications due to its compact rectangular package and industrial temperature grade suitability.
TMC262C-LA
Analog Devices
Analog Devices' TMC262C-LA is a Motion Control IC with 32 terminals, operating voltage range of 5-60 V, and max output current of 10 A. Ideal for stepper motor control applications, it features a compact square package shape, low profile design (0.9 mm), and high temp tolerance (-40 to 125°C).
DRV8302DCA
DRV8302DCA by Texas Instruments is a motion control IC with 56 terminals and a supply voltage range of 6-60V. It operates in temperatures from -40 to 125°C, making it suitable for automotive applications. With a max output current of 1.7A, this brushless DC motor controller comes in a small outline package ideal for surface mounting.
IM818LCCXKMA1
AC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
DRV8830DRCR
DRV8830DRCR by Texas Instruments is a Motion Control IC with 10 terminals, operating voltage of 3-6.5V, and max output current of 1A. Ideal for industrial applications like brush DC motor control due to its compact square package and wide temperature range (-40 to 85°C).
DRV8323RHRGZT
DRV8323RHRGZT by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1A and operates in temperatures from -40 to 125°C.
DRV8350RHRGZT
Texas Instruments' DRV8350RHRGZT is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor Controllers. It operates b/w -40 to 125°C, with a supply voltage range of 9-75V. The chip carrier package has a compact square shape and low profile design for automotive applications.
MC34931SEK
NXP Semiconductors
MC34931SEK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating at 5-36V. It features BICMOS technology, GULL WING terminals, and can withstand industrial temperatures. Ideal for BRUSH DC MOTOR CONTROL applications due to its small outline package and surface mount capability.
TMC236B-PA
Trinamic Motion Control & Kg
TMC236B-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 7A. Ideal for automotive applications due to its HVCMOS technology, it's a stepper motor controller in a low-profile flatpack package suitable for surface mount assembly.
DRV8243PQDGQRQ1
Texas Instruments' DRV8243PQDGQRQ1 is a Motion Control IC with 28 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates b/w -40 to 125 °C and supports a max output current of 12 A. The IC features BICMOS technology, GULL WING terminal form, and has a supply voltage range from 4.5 V to 35 V.
TMC603A-LA
Microchip Technology
TMC603A-LA by Microchip Technology is a motion control IC with 1 function. It operates at a nominal voltage of 5V and has a max operating temperature of 125°C. This IC is commonly used as a brushless DC motor controller in various applications.
POWERSTEP01
POWERSTEP01 by STMicroelectronics is a Motion Control IC with 89 terminals, operating at temperatures from -25°C to 125°C. It features a nominal voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for stepper motor control applications due to its surface mount capability and matte tin terminal finish.
IRAMY20UP60B
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
TLE52052GPAUMA1
TLE52052GPAUMA1 by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. Ideal for BRUSH DC MOTOR CONTROL applications due to its 13.2V nominal voltage and compact rectangular package design (15.9mm x 11mm).
TLE5205-2GP
Siemens
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Qualification: Not Qualified;
DRV8312DDW
Texas Instruments DRV8312DDW is a Motion Control IC with 44 terminals, operating voltage of 12-50V. It features a max output current of 6.5A and operates in industrial temperature range (-40 to 85°C). Ideal for brush DC motor control applications due to its compact size and high supply voltage tolerance.
A4980KLPTR-T
Allegro MicroSystems
A4980KLPTR-T by Allegro MicroSystems is a motion control IC with a rectangular package and a small outline. It operates at a nominal voltage of 3.3V and has a max operating temperature of 150°C. This IC is commonly used as a stepper motor controller in automotive applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TB6612FNG
Toshiba
TB6612FNG by Toshiba is a Motion Control IC with 2 functions, operating at 3-5V. Ideal for BRUSH DC MOTOR CONTROL, it offers a max output current of 3.2A and operates b/w -20 to 85°C.
TB6600HG
Toshiba's TB6600HG is a Motion Control IC with 25 terminals, supporting a max output current of 5A. Operating b/w -30 to 85°C, it handles supply voltages from 8V to 42V. Ideal for stepper motor control applications due to its BCDMOS technology and compact rectangular package design.
TB6600FG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES;
TB6643KQ(O,8)
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 7; Package Code: HSIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6674FG
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6614FNG,C,EL
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6615PG,8
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6612FNG(EL)
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6617FNG
TB6631FNG
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6608FNG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6612FNG(O,EL)
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6615PG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6615PG(O,8)
TB6607FLG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TB6613FTG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TB6612FNG(O,C,8,EL
TB6609FLG
TB6613FTG(O,8,EL)
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved