Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Core Material: CERAMIC;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fixed Inductors LL2012-F18NM attributes and parameters. Explore more Fixed Inductors devices from Toko
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
LL2012-F18NM Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
DLA Piper is working with TOKO to solve the inefficiencies of today’s capital markets by leveraging distributed ledger technology. TOKO is a digital asset creation platform that couples the compliance and regulatory rigor of a global law firm with the innovative technology solutions of tomorrow. TOKO provides a platform for creating new markets and uses distributed ledger technology to disseminate market information and provide transparency.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Hitachi
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
IHLP4040DZER470M11
Vishay Intertechnology
Vishay Intertechnology's IHLP4040DZER470M11 is a shielded, surface mount inductor with 47uH nominal inductance and 3.3A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.145 ohm and operates b/w -55°C to 125°C temperature range.
CTX100-1-52LP-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
P0149NL
Pulse Electronics
P0149NL by Pulse Electronics is a shielded, dual-ended power inductor with 100uH nominal inductance. It has a max rated current of 1.23A and operates b/w -40 to 130°C. Ideal for general purpose applications requiring a compact SMT package.
VLS3012HBX-2R2M
TDK
VLS3012HBX-2R2M by TDK is a shielded, dual-ended fixed inductor with 2.2uH nominal inductance and 105°C max operating temp. Ideal for power applications, it has a metal core construction, 2.84A max rated current, and compact SMT package size of 3x3x1.2mm.
LQH43MN330J03L
Murata Manufacturing
Murata Manufacturing's LQH43MN330J03L is a 33uH RF inductor with 1.2 ohm DC resistance and 5% tolerance. Featuring dual-ended terminals, it operates b/w -40 to 85 °C with a max rated current of 0.27 A. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 12 MHz and measures 4.5mm x 3.2mm x 2.6mm in size.
B82477G4105M000
The TDK B82477G4105M000 is a shielded, surface mount fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.55A and operates b/w -55°C to 125°C. With a compact size of 12.8mm x 12.8mm x 8mm, it is a general-purpose inductor suitable for various electronic devices.
LQW18AN18NG00D
LQW18AN18NG00D by Murata is a wirewound chip inductor with 0.018 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and SMT packaging, it operates b/w -55 to 125 °C with a max rated current of 0.55 A. With a min quality factor of 40 at L-nom, this general-purpose inductor has a self-resonance frequency of 5500 MHz.
636CY-220M=P3
Toko
636CY-220M=P3 by Toko is a shielded, surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 22uH and max rated current of 0.9A, suitable for DC-DC converter applications due to its general purpose design and ferrite core material.
LQW15AN47NJ00D
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
LQW15AN6N2C00D
Murata Manufacturing's LQW15AN6N2C00D is a wirewound chip inductor with 0.0062 uH nominal inductance, 8000 MHz self-resonance frequency, and 3.23% tolerance. Ideal for RF applications due to its high Q factor at 250 MHz test frequency. Surface mount design with dual-ended terminals makes it suitable for compact electronic devices.
SRN2512-1R0M
Bourns
Bourns SRN2512-1R0M is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -55 to 125°C with a self-resonance frequency of 120MHz.
B82464A4104K000
TDK B82464A4104K000 is a surface mount fixed inductor with 100uH nominal inductance, 0.28 ohm DC resistance, and 1.03A max rated current. Ideal for power applications, it features dual-ended terminals and ferrite core material. Operating temperature ranges from -55 to 150°C making it suitable for various general purpose inductor needs.
B82477-G4104-M
B82477-G4104-M by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.7A max rated current. Ideal for power applications, it features a dual-ended terminal placement and ferrite core material, operating b/w -55°C to 125°C.
LQM21NN4R7K10L
Murata Manufacturing's LQM21NN4R7K10L is an 0805 SMT inductor with 4.7uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, self-resonance frequency of 47MHz, and ferrite core material. Ideal for general purpose use with a Q factor of at least 45 at the test frequency of 10MHz.
DR74-101-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
DR74-680-R
Eaton Corporation
Eaton Corporation's DR74-680-R is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 1.03A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
CBC3225T100MR
Taiyo Yuden
Taiyo Yuden's CBC3225T100MR is a fixed inductor with 10uH nominal inductance, 0.9A max rated current, and 105°C max operating temp. Ideal for power applications, this SMT component features dual-ended terminals and ferrite core material.
33465
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: RECTANGULAR PACKAGE; Nominal Inductance (L): 88.2 uH;
DFE201612E-2R2M=P2
7447709220
Wuerth Elektronik & Kg
Wurth Elektronik 7447709220 is a shielded fixed inductor with 22uH nominal inductance, 5.3A max current, and 10MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved