Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: B4F; Width: 3.8 mm; Minimum Cutoff Frequency: 2.3 GHz; Height: 3.2 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Prism Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Perfect Parts
RF Transformers 617DB-1023 attributes and parameters. Explore more RF Transformers devices from Toko
Maximum Cutoff Frequency:
Minimum Cutoff Frequency:
Height:
Insertion Loss:
Length:
Manufacturer Series:
Mounting Feature:
Dimensions:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
617DB-1023 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
DLA Piper is working with TOKO to solve the inefficiencies of today’s capital markets by leveraging distributed ledger technology. TOKO is a digital asset creation platform that couples the compliance and regulatory rigor of a global law firm with the innovative technology solutions of tomorrow. TOKO provides a platform for creating new markets and uses distributed ledger technology to disseminate market information and provide transparency.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
8810
Jw Miller Magnetics
RF TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 7 mm; Width: 111.5 mm;
BAL-2593D5U
STMicroelectronics
STMicroelectronics' BAL-2593D5U RF Transformer features 1.2 dB insertion loss, 2400 GHz min cutoff frequency, and 2500 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with operating temperatures ranging from -30 °C to 85°C.
MABACT0059
TE Connectivity
TE Connectivity's MABACT0059 RF Transformer offers 8.4 dB insertion loss, 4.5 GHz min cutoff frequency, and 3000 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with dimensions of 3.81mm x 3.81mm x 2.72mm and operating temperatures ranging from -40°C to 85°C.
ETC1-1T-5TR
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
SWB3010-SMLB
Coilcraft
Coilcraft's SWB3010-SMLB RF Transformer offers 780uH inductance, 100MHz max cutoff frequency, and -40 to 85°C operating range. Ideal for surface mount applications in RF circuits for signal transformation and filtering.
HHM1589B1
TDK
TDK's HHM1589B1 RF Transformer offers low insertion loss of 1.4 dB, with a wide operating temperature range from -40°C to 85°C. This surface mount transformer has dimensions of L2.0xB1.25xH0.95 (mm) and is ideal for applications requiring high-frequency signal conversion up to 710 MHz, such as in RF communication systems or wireless devices.
WB3010-SMLD
Coilcraft's WB3010-SMLD RF Transformer offers 780uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.005 GHz to 100 MHz. Ideal for surface mount applications in RF circuits.
SWB1015-PCL
Coilcraft's SWB1015-PCL RF Transformer offers 80uH inductance, 0.1GHz min cutoff frequency, and 150MHz max cutoff frequency. Ideal for RF applications with -40 to 85°C temp range, it features matte tin finish and through-hole mounting.
BALFLB-WL-08D3
STMicroelectronics' BALFLB-WL-08D3 RF Transformer offers 2.2 dB Insertion Loss, 470 GHz Min Cutoff Frequency, and 105°C Max Operating Temp. Ideal for applications requiring Surface Mounting, with a frequency range of 470 MHz to 510 MHz.
BAL-NRF01D3
BAL-NRF01D3 by STMicroelectronics is a RF transformer with 2.25 dB insertion loss, operating from -40 to 105°C. It has a cutoff frequency range of 2400-2540 MHz and comes in tape & reel packaging. Ideal for surface mount applications in various RF circuits.
WB1.5-6SLD
Coilcraft's WB1.5-6SLD RF Transformer offers low 0.26 dB insertion loss, 56 uH primary inductance, and a wide frequency range from 0.05 GHz to 325 MHz. Ideal for surface mount applications in RF circuits, it operates b/w -40°C to 85°C with matte tin finish and nickel barrier for durability.
WBC2-1TLC
Coilcraft's WBC2-1TLC RF Transformer features 10uH primary inductance, 0.5dB insertion loss, and 0.2GHz min cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40°C to 85°C.
TTWB2040LD
Coilcraft's TTWB2040LD RF Transformer offers 400V isolation voltage, 0.4dB insertion loss, and 25uH inductance. Ideal for power applications, it operates b/w -40 to 85°C with a frequency range of 150kHz to 400MHz. This surface mount transformer has dimensions of L6.35xB6.1xH4.7mm and is suitable for various RF circuit designs.
MABAES0061
Tyco Electronics M/a-com
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: MABAES0061; Length: 3.81 mm; Minimum Operating Temperature: -40 Cel; Height: 3.8 mm;
ETC1-1T-2TR
ETC1-1T-2TR RF Transformer by M/a-com features 1.5 dB insertion loss, 0.1 GHz min cutoff frequency, and 200 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits with a turns ratio of 1:1, dimensions L3.81xB2.79xH2.79 (mm), and operating temperatures from -40 to 85°C.
ADT1-1WT-1
Mini-circuits
The Mini-circuits ADT1-1WT-1 RF Transformer has a power rating of 0.25W, insertion loss of 1dB, and max DC unbalance current of 30mA. It is designed for signal applications with a min cutoff frequency of 1GHz and operates in temperatures ranging from -20°C to 85°C. Ideal for surface mount installations, it comes in tape & reel packaging and measures L7.87xB5.59xH2.84mm.
BD3150N50100AHF
Ttm Technologies
BD3150N50100AHF by Ttm Technologies is an RF Transformer with 0.9 dB Insertion Loss, 3100 GHz Min Cutoff Frequency, and 7000 MHz Max Cutoff Frequency. Ideal for surface mount applications in RF circuits due to its compact dimensions of L1.04xB1.04xH0.57 (mm) and NICKEL GOLD terminal finish.
TM1-0
Synergy Microwave
The Synergy Microwave TM1-0 RF Transformer features 3.4 dB insertion loss, 0.3 GHz min cutoff frequency, and 1000 MHz max cutoff frequency. Ideal for RF applications, this surface mount transformer operates b/w -40°C to 85°C with compact dimensions of L0.15xB0.15xH0.15 mm.
TCM2-33WX+
Mini-circuits TCM2-33WX+ RF Transformer has 3dB Insertion Loss, 10GHz Min Cutoff Freq, and 3000MHz Max Cutoff Freq. Ideal for RF applications with Surface mounting feature, operating b/w -40°C to 85°C.
LDB212G4005C-001
Murata Manufacturing
LDB212G4005C-001 by Murata Manufacturing is a surface mount RF transformer with dimensions of 2.0x1.25x0.95 mm. It has an insertion loss of 0.9 dB and can operate at temperatures ranging from -40 to 85 °C. This transformer is commonly used in RF applications requiring high cutoff frequencies up to 2300 GHz and max cutoff frequency of 2500 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Toko
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved