Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Cherry D413-R1LD-G2 is a snap action/limit switch with a SPDT switch function. It has a body width of 10.3124 inch and a body height of 15.9004 mm. This switch is commonly used in applications requiring a max AC contact current of 0.1 A and a max DC contact voltage of 30 V.
Median Price
$7.491
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$6.780
1k+ parts
$3.230
10k+ parts
-
Verical
Nova Conductors
$3.491
Vyrian
IBS Electronics
$3.630
$3.478
$2.178
Aztec Data Supply Inc.
$1.205
Continental Prestige Electronics
$3.421
Argo Parts USA
Netroflash
$3.316
$3.246
Component Stockers USA
$4.030
This product is made with brass terminals, which ensures a reliable electrical connection and enhances durability.
With an impressive electrical life of 50,000 cycles, this switch offers long-lasting performance and reliability for various applications.
The wide body design of this switch allows for easy installation and provides ample space for connections.
The SPDT (Single-Pole, Double-Throw) switch function enables this product to control multiple circuits, making it versatile for different control applications.
The compact body height of this switch allows for easy integration into tight spaces without compromising functionality.
With a maximum AC contact current of 0.1A, this switch can handle moderate electrical loads, ensuring safe and efficient operation.
The ability to function in extreme temperatures down to -40°C makes this switch suitable for a wide range of environments and applications.
The actuator travel of 1.6002mm provides precise and reliable switching action, allowing for accurate control in various mechanical systems.
This switch can handle DC contact voltage of up to 30V, making it compatible with a wide range of DC electrical applications.
This switch combines the characteristics of snap acting and limit switch types, offering fast and precise switching action along with selectable limit settings.
The maximum AC rating of 0.1A at 250VAC ensures efficient power handling capability, making it a reliable choice for AC electrical systems.
The compact body length/diameter of this switch allows for easy integration and installation in space-constrained applications.
With a maximum DC rating of 0.5A at 30VDC, this switch offers the ability to handle higher loads in DC circuits, expanding its application possibilities.
The actuator length of 0.122 inch provides precise and responsive actuation, enabling accurate control in various mechanical systems.
With a maximum DC contact current of 0.5A, this switch can handle moderate to high electrical loads, ensuring reliable and safe operation.
The switch is capable of handling AC contact voltage of up to 250V, making it suitable for a wide range of AC electrical applications.
Snap Action & Limit Switches D413-R1LD-G2 attributes and parameters. Explore more Snap Action & Limit Switches devices from The Cherry
Length (Actuator):
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Minimum Operating Temperature:
Switch Function:
Switch Type:
Terminal Material:
D413-R1LD-G2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
The CHERRY Corporation was founded by Walter Lorain Cherry in 1953. The first microswitches were produced in the basement of a restaurant in Highland Park, Illinois. From humble beginnings, the company quickly grew in size and reputation after entering the US automobile market. In the early 1960’s, Walter L. Cherry ventured across the pond to Europe. American Entrepreneurship coupled with German Engineering encompasses the history and future of CHERRY. Today, CHERRY is regarded as the epitome of precision, longevity, and responsibility. A unique feeling.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
261
Deltrol Controls
Other Relays;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Taiwan Semiconductor
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
First Components International
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
1552200253
Molex
WIRE AND CABLE;
1AC2
Honeywell Sensing And Control
1AC2 by Honeywell is a SPDT snap action/limit switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring a 7.92mm actuator travel, it is ideal for panel mount applications requiring momentary switch action. With a compact body size of 57.15x19.46x41.81 mm, it offers reliable performance in various industrial settings.
D2F-01FL-D
Omron
The Omron D2F-01FL-D snap action switch has an electrical life of 30,000 cycles and operates b/w -25°C to 65°C. With a SPDT switch function, it features a HINGE LEVER actuator type and offers a max DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action.
3SE5413-0CD20-1EA2
Siemens
SNAP ACTING/LIMIT SWITCH;
111SM115-H58
111SM115-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 4.14mm actuator travel. It operates at max temp of 121°C, AC contact current of 5A@250VAC, and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with solder termination type.
83161894
Crouzet
ESE23J001
Panasonic
9007MS03S0306
Schneider Electric Sa
EX-AR420
The Honeywell Sensing And Control EX-AR420 is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It offers CORROSION PROOF and EXPLOSION PROOF sealing, suitable for applications requiring reliable operation in harsh environments. With a max AC contact current of 5A@480VAC and DC contact voltage of 0.5A@125VDC, it is ideal for PANEL MOUNT-THREADED installations.
Z-15GW3-B
Omron Z-15GW3-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a sealing rating of IP00, it's suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
311SM701-H58
311SM701-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 12.52mm height, and 19.84mm length. It has a max operating temperature of 121°C and can handle up to 4A@250VAC or 5A@30VDC current loads. Ideal for panel mounting applications requiring momentary switch action with wire termination.
JX-51
JX-51 by Honeywell Sensing And Control is a Snap Action & Limit Switch with a 5.59" wide body, corrosion-proof sealing, and 0.64mm actuator travel. It features a steel roller actuator type, momentary switch action, and 1.67N max operating force. Ideal for panel mounting applications requiring reliable wire termination in industrial settings.
9007AO105S1
LSA1A-2A
LSA1A-2A by Honeywell is a SPDT snap action/limit switch with side rotary actuator. It has a max operating temperature of 121°C and min of -12°C. With max DC contact voltage of 250V and AC contact voltage of 600V, it's ideal for panel mounting applications requiring momentary switch action.
SS-3GL13P
Omron SS-3GL13P is a SPDT snap acting/limit switch with 70000 cycles electrical life. Featuring IP40 sealing, it has a max operating temperature of 85°C and -25°C min. Ideal for panel mounting applications, it offers a max AC contact current of 3A@125VAC and DC contact current of 3A@30VDC.
V-10G3-1C25-K
Omron V-10G3-1C25-K is a SPDT snap action/limit switch with 300000 cycles electrical life. It has a body width of 10.3in, sealing rating of IP40, and operates b/w -25 to 80°C. Ideal for panel mounting applications requiring momentary switch action with max AC contact voltage of 250VAC and current of 10A.
TMCGF5ST1540Y
C & K Components
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER, HIGH FORCE; Material (Actuator): THERMOPLASTIC; Insulation Resistance: 1000000000 ohm;
5SE1-T
5SE1-T by Honeywell is a snap action/limit switch with SPDT function. It features a steel plunger actuator, corrosion-proof sealing, and 8.79" body width. Ideal for panel mounting applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
EXD-AR-3
The Honeywell Sensing And Control EXD-AR-3 is an explosion-proof snap acting/limit switch with DPDT switch function. It has a max AC contact current of 10A@250VAC and a max DC contact current of 0.3A@125VDC. Ideal for panel mounting applications, it features a roller lever actuator type with 6.35mm actuator travel.
SS-5GL2D2
Omron SS-5GL2D2 is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and sealing rating of IP40. Ideal for applications requiring momentary switch action, such as industrial machinery control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D413-R1AA-G2
The Cherry
The Cherry's D413-R1AA-G2 is a SPDT snap action/limit switch with 50000 cycles electrical life. Featuring brass terminals, it has a max AC contact current of 0.1A and DC contact current of 0.5A at 30VDC. Ideal for applications requiring precise actuation within -40°C to +25°C temperature range.
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Maximum DC Contact Current: .5 A; Length (Actuator): .122 inch; Maximum AC Contact Current: .1 A; DC Maximum Rating R Load (Contact): 0.5A@30VDC;
D413-R1RA-G2
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Body Length/Diameter: 27.7876 mm; Maximum AC Contact Voltage: 250 V; Manufacturer Series: D4; Minimum Operating Temperature: -40 Cel;
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Minimum Operating Temperature: -40 Cel; Maximum DC Contact Current: .5 A; AC Maximum Rating R Load (Contact): 0.1A@250VAC; Terminal Material: BRASS;
D413-R1LA-G2
The Cherry D413-R1LA-G2 is a SPDT snap action/limit switch with 50000 cycles electrical life. It features brass terminals, 10.3124" body width, and 15.9004mm height. Ideal for applications requiring a 0.1A@250VAC AC max rating, -40°C min operating temperature, and 0.5A@30VDC DC max rating.
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; DC Maximum Rating R Load (Contact): 0.5A@30VDC; Maximum AC Contact Current: .1 A; Length (Actuator): .122 inch; Electrical Life: 50000 Cycle(s);
D413-R1LD-G2
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Length (Actuator): .122 inch; Minimum Operating Temperature: -40 Cel; Body Width: 10.3124 inch; Body Height: 15.9004 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved