Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's W58-XB1A4A-12 is a 12A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and rated breaking capacity of 1000A. Ideal for panel mount applications requiring series trip circuit protection.
Median Price
$7.940
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$4.410
100+ parts
$3.310
1k+ parts
$3.180
10k+ parts
$3.170
Heilind Electronics
$5.666
-
Interstate Connecting
DigiKey
$5.607
$5.098
Mouser Electronics
$8.830
$5.600
$5.220
$5.010
RS (Exports)
$9.010
TTI
$9.460
$5.760
$4.890
$4.690
Newark
$9.600
$6.590
$6.460
RS Americas
$9.640
$8.770
$8.480
TE Connectivity
$19.060
$16.520
$15.880
Master Electronics
$6.280
$5.260
$4.950
Verical
$6.423
$6.047
Chip1Stop
$5.920
$5.480
Hutch & Son
$4.490
TME
$8.710
$8.100
Rapid Electronics
Electro Sonic
$5.330
$4.120
$3.420
Vyrian
IBS Electronics
$7.699
$6.599
$6.430
Nova Conductors
DF Sales Co.
American Connector Supply Corp
Prism Electronics
Resion
Bristol Electronics
Semicontronic
$3.750
$3.656
$3.638
Aztec Data Supply Inc.
$8.952
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Bastille Electronics
The high rated AC voltage makes this circuit breaker suitable for a wide range of applications, providing reliable protection.
With a quick 6-second trip time delay, this circuit breaker can react swiftly to over-current conditions, minimizing potential damage.
The compact body size of 34.93 mm makes this circuit breaker ideal for installations where space is limited.
The 16.76 inch body width ensures durability and stability, making it a dependable choice for circuit protection.
The quick connect terminal shape simplifies installation and maintenance, saving time and effort.
The 34.93 mm body height provides a slim profile, allowing for easy integration into various systems.
With a rated current of 12 A, this circuit breaker offers reliable protection for moderate power loads.
The thermal circuit breaker design ensures effective protection against overloads and short circuits.
The high rated breaking capacity of 1000 A ensures the circuit breaker can safely handle fault currents without damage.
The rated DC voltage of 50 V allows this circuit breaker to be used in DC applications, expanding its versatility.
The push to reset actuator type makes it easy to quickly reset the circuit breaker after a fault condition, ensuring minimal downtime.
The panel mount feature simplifies installation on panels or enclosures, providing secure mounting for reliable performance.
The series trip circuit function helps protect downstream circuits by tripping all connected components in response to a fault, enhancing overall system safety.
Circuit Breaker W58-XB1A4A-12 attributes and parameters. Explore more Circuit Breaker devices from TE Connectivity
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Height:
Body Length/Diameter:
Body Width:
Actuator Type:
Trip Time/Delay:
Circuit Function:
No. of Poles:
Circuit Protection Type:
Terminal Shape:
Mounting Feature:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Lite-on Semiconductor
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
MS14154-10
Defense Logistics Agency
MS14154-10 by Defense Logistics Agency is a circuit breaker with dimensions of 46.74mm x 19.84mm x 35.08mm and a rated current of 10A. It has a thermal circuit protection type, push-pull actuator type, and is panel mount-threaded. It is commonly used in military applications as it meets the reference standard MIL-C-5809.
FAZ-B6/3
Eaton Corporation
The Eaton Corporation FAZ-B6/3 is a 6A circuit breaker with a rated AC voltage of 480V. Featuring a short blow characteristic and thermal magnetic protection, it is ideal for manual on/off circuit functions in industrial applications. With a compact body size of 80x53.1x60 mm and DIN rail mounting feature, it ensures reliable performance in environments with temperatures ranging from -40°C to 75°C.
IEL11-1-63-40.0-01-V
Sensata Technologies
Sensata Technologies' IEL11-1-63-40.0-01-V is a 40A magnetic circuit breaker with a rated AC voltage of 480V. Featuring trip-free circuit function and toggle handle actuator, it is corrosion/moisture resistant and has a breaking capacity of 5000A. Ideal for panel mounting applications in environments with temperatures ranging from -40°C to 85°C.
A9R61425
Schneider Electric Sa
EQUIPMENT LEAKAGE CIRCUIT BREAKER;
5SJ4335-7HG41
Siemens
EQUIPMENT LEAKAGE CIRCUIT BREAKER; Maximum Operating Temperature: 55 Cel; Minimum Operating Temperature: -25 Cel;
W67-X2Q12-10
TE Connectivity's W67-X2Q12-10 is a 10A circuit breaker with rated AC voltage of 277V and trip time of 2.2s. Its compact dimensions (50.8mm x 19.05mm x 41.66mm) make it ideal for panel mounting applications requiring standard blow characteristic and magnetic protection up to 5000A in series trip circuits.
A9N61532
THERMAL MAGNETIC;
3RV2021-4BA15
The Siemens 3RV2021-4BA15 is a 20A circuit breaker with rated AC voltage of 690V. Featuring thermal magnetic protection, it has a breaking capacity of 2000A and operates in temperatures ranging from -20°C to 60°C. Ideal for DIN-rail mounting, its compact dimensions of 97mm x 45mm x 96.9mm make it suitable for various industrial applications.
CS1-B2-12-610-121-MG
Carling Technologies
CS1-B2-12-610-121-MG by Carling Technologies is a 10A magnetic circuit breaker with 5000A breaking capacity. It features corrosion/moisture resistance and operates b/w -40 to 85°C. Ideal for panel mounting in applications requiring reliable series trip circuit protection.
S201-D20NA
Abb
FAZ-D15/3-NA
The Eaton Corporation FAZ-D15/3-NA is a 15A thermal magnetic circuit breaker with a rated AC voltage of 277V. Featuring snap-on terminals and toggle actuator, it has a high breaking capacity of 10kA. Ideal for DIN rail mounting, this 3-pole breaker offers manual on/off control in various industrial applications.
CA3-P0-D4-825-322-MT
Carling Technologies CA3-P0-D4-825-322-MT is a 250A magnetic circuit breaker with corrosion/moisture resistance. Featuring a rated breaking capacity of 10kA, it has a body size of 65.1mm x 57.53mm x 47mm and operates b/w -40°C to 85°C. Ideal for panel mounting in UL-rated applications requiring reliable series trip protection.
3VA2163-5HL36-0AA0
Siemens 3VA2163-5HL36-0AA0 is a 63A thermal circuit breaker with 55000A breaking capacity. Rated at 690V, it has IP40 protection and operates b/w -40°C to 70°C. Ideal for panel mounting in circuits requiring reliable trip function.
FAZ-C1.5/2-NA-L
Eaton Corporation's FAZ-C1.5/2-NA-L is a 240V thermal magnetic circuit breaker with a rated current of 1.5A and breaking capacity of 10kA. Featuring snap-on terminals, toggle actuator, and DIN rail mounting, it is ideal for manual on/off circuit protection in various applications.
IEG1-1-52-20.0-01-V
Sensata Technologies' IEG1-1-52-20.0-01-V is a 20A magnetic circuit breaker with quick connect terminals. It offers trip-free circuit protection, rated at 7500A breaking capacity and operates b/w -40°C to 85°C. Ideal for panel mounting applications requiring corrosion/moisture resistance in environments meeting CCC and VDE standards.
2800925
Phoenix Contact
EQUIPMENT LEAKAGE CIRCUIT BREAKER; Manufacturer Series: 2800925;
3TC7-10
THERMAL CIRCUIT BREAKER; Manufacturer Series: 3TC7;
CA2-B0-34-615-121-I
Carling Technologies CA2-B0-34-615-121-I is a 15A magnetic circuit breaker with 480V AC and 150V DC ratings. Featuring a compact design (47x38.48x63.5 mm), it has a high breaking capacity of 10000A. Ideal for panel mounting in series trip circuits, UL certified for applications requiring reliable overcurrent protection up to 85°C and down to -40°C.
0903037
Phoenix Contact 0903037 is an 8A magnetic circuit breaker with IP20 protection. Designed for DIN rail mounting, it operates b/w 0-50°C and complies with CE and UL standards. Ideal for safeguarding electrical circuits in industrial applications.
FAZ-D10/2-RT
The Eaton Corporation FAZ-D10/2-RT is a 10A thermal magnetic circuit breaker with a rated AC voltage of 480V. Featuring a trip-free circuit function, it has a rated breaking capacity of 10000A and operates within temperatures ranging from -25°C to 75°C. Ideal for DIN rail mounting, this toggle actuator breaker is CSA and UL certified for reliable circuit protection in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
W58-XB1A4A-20
TE Connectivity's W58-XB1A4A-20 is a 20A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip delay of 6s and breaking capacity of 1000A. Ideal for panel mounting in series trip circuits, this compact device measures 34.93mm x 16.76mm x 34.93mm.
W58-XB1A4A-15
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 15 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4A-5
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 5 A; Terminal Shape: QUICK CONNECT;
W58-XC4C12A-15
TE Connectivity's W58-XC4C12A-15 is a 15A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and rated breaking capacity of 1000A. Ideal for panel mount applications in series trip circuits.
W58-XC4C12A-20
TE Connectivity's W58-XC4C12A-20 is a 20 A thermal circuit breaker with a rated AC voltage of 250 V. It has a trip time of 6 seconds and a rated breaking capacity of 1000 A. This circuit breaker is commonly used for panel mount applications requiring series trip protection.
W58-XB1A4A-6
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 6 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4A-10
TE Connectivity's W58-XB1A4A-10 is a 10A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and push-to-reset actuator type. Ideal for panel mounting in applications requiring series trip circuit protection with CSA and UL standards compliance.
W58-XC4C12A-1
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 1 A; Terminal Shape: LUG;
W58-XC4C12A-3
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3 A; Terminal Shape: SCREW;
W58-XB1A4A-25
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 25 A; Terminal Shape: QUICK CONNECT;
W58-XC4C12A-10
TE Connectivity's W58-XC4C12A-10 is a 10A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and rated breaking capacity of 1000A. Ideal for panel mount applications requiring series trip circuit protection.
W58-XC4C12A-30
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 30 A; Terminal Shape: QUICK CONNECT;
W58-XC4C12A-5
TE Connectivity's W58-XC4C12A-5 is a 5A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and rated breaking capacity of 2000A. Ideal for panel mounting in applications requiring series trip circuit protection.
W58-XB1A4A-2
TE Connectivity's W58-XB1A4A-2 is a 2A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 10s and rated breaking capacity of 1000A. Ideal for panel mount applications requiring series trip circuit protection.
W58-XC1A4A-16
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 16 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4A-7
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 7 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4A-3
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 3 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4A-30
W58-XB1A4A-4
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 50 V; Rated Current: 4 A; Terminal Shape: QUICK CONNECT;
W58-XB1A4B-15
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved