Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's W28-XQ1A-3 is a 250V thermal circuit breaker with 3A rated current and 1000A breaking capacity. Featuring a quick connect terminal shape, push-to-reset actuator type, and panel mounting feature, it is ideal for series trip circuit protection applications.
Median Price
$3.270
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.708
100+ parts
$2.515
1k+ parts
-
10k+ parts
Interstate Connecting
$2.992
$2.778
Element14
$3.605
$2.647
Mouser Electronics
$4.690
$3.210
$2.860
Farnell
$4.693
$3.023
Newark
$4.960
$3.400
$3.170
$3.100
RS Americas
$5.600
$5.090
$4.920
TE Connectivity
$8.450
$7.480
$7.000
Master Electronics
$2.840
$2.770
$2.750
Verical
$3.341
$3.271
TTI
$2.900
$2.740
Chip1Stop
$2.830
$2.700
Sager
Powell Electronics
TTI Europe
$2.541
Arrow
$2.096
$2.019
DF Sales Co.
$1.000
Nova Conductors
$2.463
TEDSS.com
$2.990
TME
$3.740
$3.050
Hutch & Son
$3.790
Component Electronics Inc.
$3.850
$2.880
$2.500
IBS Electronics
$4.207
$3.156
Rapid Electronics
$3.124
A2Z Electronics, Inc.
Bristol Electronics
First Choice Components Inc.
Electronic Expediters
Prism Electronics
Jaybe Electronics
Q Components
Semtec, LLC
LWI Electronics Inc
Electro Mavin
Connector Distribution Corp
Right Parts Inc.
Argo Parts USA
Continental Prestige Electronics
$2.413
Netroflash
Semicontronic
$3.315
$3.298
Advanced Electronics
$4.236
$4.025
Aztec Data Supply Inc.
$8.402
Neutron USA
$9.990
Modulus Dynamics
$16.419
Perfect Parts
Assy Fe
4 Star Electronics, Inc. (Excess)
With a high rated AC voltage of 250 V, this circuit breaker can effectively protect electrical circuits from overload or short circuit situations.
The quick trip time of 2.2 seconds ensures fast response in case of a fault, minimizing the risk of damage to connected devices.
The compact size of 15.88 mm ensures that this circuit breaker can fit into tight spaces and panels without occupying much room.
The average body width of 13.72 inch allows for easy installation in standard electrical panels or enclosures.
The quick connect terminal shape facilitates easy and efficient wiring connections, saving time during installation.
The compact dimensions of this circuit breaker make it suitable for various applications where space is limited.
With a rated current of 3 A, this circuit breaker is ideal for low current applications, providing reliable protection for sensitive devices.
The thermal circuit breaker design ensures reliable protection against overheating and overcurrent situations, enhancing the safety of the electrical system.
The high rated breaking capacity of 1000 A allows this circuit breaker to safely interrupt high fault currents, preventing damage to the circuit.
With a rated DC voltage of 32 V, this circuit breaker is suitable for DC applications, providing effective protection against faults in DC circuits.
The push to reset actuator type allows for easy resetting of the circuit breaker after a trip, ensuring quick restoration of power.
The panel mount feature allows for secure and convenient installation of this circuit breaker on electrical panels, ensuring stability during operation.
The series trip circuit function ensures that all connected devices are simultaneously protected in case of a fault, minimizing downtime and damage.
Compliance with multiple reference standards like CSA, UL, and VDE highlights the quality and safety of this circuit breaker, making it a reliable choice for various applications.
Circuit Breaker W28-XQ1A-3 attributes and parameters. Explore more Circuit Breaker devices from TE Connectivity
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Height:
Body Length/Diameter:
Body Width:
Dimensions:
Actuator Type:
Trip Time/Delay:
Circuit Function:
No. of Poles:
Circuit Protection Type:
Reference Standard:
Terminal Shape:
Mounting Feature:
PCN Design/Specification - W28-ZQ1A - drawings modified 25/JAN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
W67-X2Q12-20
TE Connectivity's W67-X2Q12-20 Circuit Breaker, rated 277V/20A, features a trip time of 2.2s and dimensions of 50.8mm x 19.05mm x 41.66mm. With fungus and moisture resistance, it is ideal for panel mounting in applications requiring magnetic circuit protection with CSA and UL standards compliance.
PCG-BA-24-625-1GA-E11
Carling Technologies
Carling Technologies PCG-BA-24-625-1GA-E11 is a 25A circuit breaker with 240V AC voltage rating. Featuring moisture-resistant design, it has a breaking capacity of 5000A and operates in temperatures from -35°C to 66°C. Ideal for equipment protection, it has a toggle handle actuator and UL certification for reliability.
S201-B13
Abb
THERMAL MAGNETIC;
1019921
Phoenix Contact
GB2CD09
Schneider Electric Sa
MS14154-10L
Sensata Technologies
Sensata Technologies' MS14154-10L is a 120V thermal circuit breaker with 10A rated current and 2000A breaking capacity. Featuring corrosion and moisture resistance, it has dimensions of 46.73mm x 19.84mm x 35.15mm, making it ideal for panel mount-threaded applications requiring trip-free circuit protection.
W58-XB1A4A-15
TE Connectivity's W58-XB1A4A-15 is a 15A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and a breaking capacity of 1000A. Ideal for panel mounting in series trip circuits, this circuit breaker ensures reliable protection in various applications.
SU202M-Z5
AA1-B0-34-450-5D1-C
Carling Technologies AA1-B0-34-450-5D1-C is a 5A magnetic circuit breaker with 277V AC and 80V DC voltage ratings. It features corrosion/moisture resistance, screw terminals, and a panel mount for series trip applications. Operating temperatures range from -40°C to 85°C, meeting CSA and UL standards.
ESX10-TB-101-DC24V-3A-E
E-t-a Elektrotechnische Apparate
ESX10-TB-101-DC24V-3A-E by E-t-a Elektrotechnische Apparate is a 3A circuit breaker with SNAP ON terminals, DIN-RAIL MOUNT feature, and RESET BUTTON actuator. It operates at -25 to 60 °C with IP20 protection, suitable for equipment leakage protection in various industries. Compliant with ATEX, CSA, CUL, DNV, IEC, TUV, UKCA, UL standards.
W68-X2Q12-30
TE Connectivity's W68-X2Q12-30 is a 30A magnetic circuit breaker with 277V AC voltage rating and 2.2s trip delay. Featuring a toggle actuator and quick connect terminals, it is ideal for panel mounting applications requiring series trip functionality with a rated breaking capacity of 2500A.
1393249-6
TE Connectivity 1393249-6 is a thermal circuit breaker with rated AC voltage of 250V and rated current of 1.5A. It features quick connect terminals, push-to-reset actuator, and panel mount for series trip applications in circuits requiring protection against overloads and short circuits.
1620-3-15A
1620-3-15A by E-t-a Elektrotechnische Apparate is a 15A thermal circuit breaker with a rated breaking capacity of 150A. Featuring corrosion resistance and IP40 protection, it has a quick connect terminal shape and reset button actuator. Ideal for panel mounting in applications requiring reliable circuit protection at temperatures ranging from -40°C to 85°C.
24337
24337 by Schneider Electric Sa is a 16A thermal magnetic circuit breaker with a rated AC voltage of 415V. Featuring a DIN-rail mount, it has a rated breaking capacity of 3000A and operates b/w -25°C to 60°C. Ideal for circuit protection in industrial applications.
2CU25R
Altech
The Altech 2CU25R is a circuit breaker with a rated AC voltage of 480V and a rated current of 25A. It has an actuator type toggle handle and is designed for use in thermal circuit protection applications.
AP12-1-51-502
Sensata Technologies' AP12-1-51-502 is a 5A magnetic circuit breaker with 1000A rated breaking capacity. Featuring a sealed, corrosion-resistant body, it operates b/w -40°C to 100°C. Ideal for panel mounting applications requiring trip-free circuit protection in harsh environments.
W58-XC4C12A-3
TE Connectivity's W58-XC4C12A-3 is a 3A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a push-to-reset actuator, it has a trip delay of 10s and rated breaking capacity of 2000A. Ideal for panel mounting in applications requiring series trip circuit protection.
EA1-B0-16-670-22B-BF
Carling Technologies EA1-B0-16-670-22B-BF is a 70A magnetic circuit breaker with 5000A breaking capacity. It has corrosion/moisture resistance, operates b/w -40 to 85°C, and rated for 125V DC voltage. Ideal for panel mounting in applications requiring series trip circuit protection.
MS3320-15
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 120 V; Rated DC Voltage: 28 V; Rated Current: 15 A; Terminal Shape: SCREW;
2908261
THERMAL CIRCUIT BREAKER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
W28-XQ1A-15
TE Connectivity's W28-XQ1A-15 is a 15A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 2.2s and rated breaking capacity of 1000A. Ideal for panel mounting in various applications requiring series trip circuit protection.
W28XQ1A15
TE Connectivity's W28XQ1A15 is a 15A thermal circuit breaker with 250V AC and 32V DC ratings. It features a quick connect terminal shape, push-to-reset actuator, and panel mount for series trip applications with a 2.2s trip delay.
W28-XQ1A15
TE Connectivity's W28-XQ1A15 is a 15A thermal circuit breaker with a rated AC voltage of 250V and trip time of 2.2s. Featuring quick connect terminals, it is ideal for panel mounting applications requiring push-to-reset actuation in series trip circuits at up to 32V DC.
W28-XQ1A-2
TE Connectivity's W28-XQ1A-2 is a 2A thermal circuit breaker with a rated AC voltage of 250V and rated DC voltage of 32V. Featuring a quick connect terminal shape, it has a trip time of 4.5s and push-to-reset actuator type. Ideal for panel mounting applications requiring series trip circuit protection with a high breaking capacity of 1000A.
W28-XQ1A10
TE Connectivity's W28-XQ1A10 is a 10A thermal circuit breaker with a rated AC voltage of 250V and trip time of 2.2s. Featuring quick connect terminals, it is ideal for panel mounting applications requiring push-to-reset actuation in series trip circuits at up to 32V DC.
W28-XQ1A-10
TE Connectivity's W28-XQ1A-10 is a 10A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 2.2s and rated breaking capacity of 1000A. Ideal for panel mount applications in series trip circuits, compliant with CSA, UL, and VDE standards.
W28XQ1A10
TE Connectivity's W28XQ1A10 is a 10A thermal circuit breaker with a rated AC voltage of 250V and trip time of 2.2s. Featuring quick connect terminals, push-to-reset actuator, and panel mount design, it is ideal for series trip applications in circuits up to 32V DC.
W28-XQ1A-1
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: 1 A; Terminal Shape: QUICK CONNECT;
W28-XQ1A-6
TE Connectivity's W28-XQ1A-6 is a 250V thermal circuit breaker with 6A rated current and 1000A breaking capacity. Featuring a quick connect terminal shape, it has a trip time of 2.2s and push-to-reset actuator type. Ideal for panel mounting in applications requiring series trip circuit protection.
W28-XQ1A-8
TE Connectivity's W28-XQ1A-8 is a 250V thermal circuit breaker with a rated current of 8A. It has a trip time of 2.2s and dimensions of 15.88mm x 13.72mm x 38.99mm, making it suitable for panel mount applications requiring series trip circuit protection.
W28XQ1A12
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: 12 A; Terminal Shape: QUICK CONNECT;
W28-XQ1A-12
TE Connectivity's W28-XQ1A-12 is a 12A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 2.2s and push-to-reset actuator type. Ideal for panel mounting in applications requiring series trip circuit protection with a rated breaking capacity of 1000A.
W28-XQ1A12
TE Connectivity's W28-XQ1A12 is a 12A thermal circuit breaker with a rated AC voltage of 250V and trip time of 2.2s. Featuring quick connect terminals, push-to-reset actuator, and panel mount design, it is ideal for series trip applications in circuits requiring protection against overcurrent at up to 32V DC.
W28XQ1A20
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: QUICK CONNECT;
W28-XQ1A-20
TE Connectivity's W28-XQ1A-20 is a 20A thermal circuit breaker with 250V AC and 32V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 2.2s and rated breaking capacity of 1000A. Ideal for panel mounting in applications requiring series trip circuit protection.
W28-XQ1A20
The TE Connectivity W28-XQ1A20 is a 20 A thermal circuit breaker with a rated AC voltage of 250 V and trip time of 2.2 seconds. It features a quick connect terminal shape and push to reset actuator type, making it suitable for panel mount applications requiring series trip circuit protection.
W28-XQ1A-5
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: QUICK CONNECT;
W28-XQ1A-0.50
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: .5 A; Terminal Shape: QUICK CONNECT;
W28-XQ1A-7
TE Connectivity's W28-XQ1A-7 is a 7A thermal circuit breaker with a rated AC voltage of 250V. It has a trip time of 2.2 seconds and dimensions of 15.88mm x 13.72mm x 38.99mm, making it suitable for panel mount applications requiring series trip circuit protection.
W28-XQ1A-14
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 32 V; Rated Current: 14 A; Terminal Shape: QUICK CONNECT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved