Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's T4141512041-000 is a circular connector with 4A signal current rating, suitable for board mounting. Featuring brass shell material and nickel finish, it has 4 contacts and operates b/w -40 to 85°C. Ideal for applications requiring a polarized, female contact design.
Median Price
$7.342
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$6.110
100+ parts
$4.230
1k+ parts
$3.710
10k+ parts
-
Arrow
$6.755
$4.949
$4.362
Mouser Electronics
$7.600
$5.490
$4.860
DigiKey
$8.230
$5.944
$5.053
Newark
$8.670
$6.620
$6.030
TE Connectivity
$24.300
$21.530
$20.140
Verical
$7.084
Chip1Stop
$6.900
$6.170
VNN
$4.236
Nova Conductors
$4.410
Digiode
$4.465
TME
$7.190
$5.710
NAC Semi
$7.370
$6.800
Vyrian
Chip Stock
Rapid Electronics
$4.874
Electro Sonic
$5.800
$5.010
$4.950
IBS Electronics
$7.481
$6.355
$6.256
Cyclops Electronics Ltd
Aztec Data Supply Inc.
$1.944
Semicontronic
$4.000
$3.900
$3.880
Corphita
Argo Parts USA
$4.390
Continental Prestige Electronics
$6.930
$5.060
$3.730
Advanced Electronics
$8.658
$7.879
$7.100
Abacus Technologies
Glotronic Ltd.
Netroflash
$4.322
$4.190
$4.102
Authorized Procurement Solutions
GreenTree Electronics
Assy Fe
Perfect Parts
Eastek
With a high rated voltage of 250 V, this connector can handle substantial power requirements, making it suitable for a variety of applications.
The high maximum operating temperature of 85°C ensures that this connector can withstand heat without compromising performance, making it reliable in harsh environments.
The preassembled contact design simplifies installation and ensures consistent connectivity, saving time and effort during assembly.
With a low minimum operating temperature of -40°C, this connector can operate effectively in cold conditions, making it versatile for various environments.
The nickel shell finish provides corrosion resistance and durability, enhancing the longevity and reliability of the connector.
The circular connector type offers secure connections and efficient signal transmission, making it suitable for applications where reliability is crucial.
With a rated current of 4 A for signals, this connector can handle moderate current requirements, ensuring stable and consistent signal transmission.
The polarization key ensures correct alignment during connection, preventing errors and enhancing the overall reliability of the connector.
With four contacts, this connector can accommodate multiple connections, providing flexibility and versatility in various applications.
The brass shell material offers durability and robustness, making the connector capable of withstanding physical stress and maintaining performance over time.
Other Function Circular Connectors T4141512041-000 attributes and parameters. Explore more Other Function Circular Connectors devices from TE Connectivity
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Shell Finish:
Shell Material:
Shell Size:
Termination Type:
Total No. of Contacts:
T4141512041-000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
PCN Design/Specification - Multiple Devices Product Improvement 20/Jun/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1200652265
Molex
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1060120500
Weidmueller & Kg
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
T4110011051-000
TE Connectivity's T4110011051-000 is a threaded circular connector with EMI shielding, rated for 60V and 4A signal current. With nickel finish and brass shell, it has 5 contacts, operates b/w -40 to 85°C, ideal for applications requiring durable polarized female connectors in receptacle style.
165-15-1002
Amphenol
Amphenol 165-15-1002 is a circular connector with 9 contacts, bayonet coupling, and waterproof option. Made of aluminum alloy with gray anodized finish, it's ideal for cable mounting applications requiring a male receptacle.
9901461207
Franz Binder &
CIRCULAR CONNECTOR;
35610
Woodhead Industries
CIRCULAR CONNECTOR; DIN Conformance: NO; Manufacturer Series: 35610; MIL Conformity: NO; IEC Conformity: NO;
206037-2
TE Connectivity's 206037-2 is a threaded circular connector with a body depth of 1.654 inch and rated voltage of 600V. It is commonly used in applications requiring a max operating temperature of 105°C, such as cable mounting for signal currents up to 34A.
T4113511051-000
TE Connectivity's T4113511051-000 is a threaded circular connector with EMI shielding, rated for 60V and 4A signal current. With brass shell material and nickel finish, it operates b/w -40 to 85°C, suitable for applications requiring durable male plug connectors with preassembled contacts.
1301460031
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
T4040014041-000
TE Connectivity T4040014041-000 is a circular connector with 4 contacts, rated at 3A. It has a shell made of brass, nickel finish, and operates b/w -40 to 85°C. Ideal for applications requiring male contact gender and plug body style with polarization key.
182922-1
TE Connectivity 182922-1 is a threaded circular connector with 9 contacts, rated for 600V and operating temperatures from -55 to 105°C. Ideal for applications requiring a polarized male connector with polyethylene insulator, such as panel mounting in environments demanding UL94V-0 flammability compliance.
1300080234
1551422
Phoenix Contact
Phoenix Contact 1551422 is a SNAP circular connector with 8 contacts, suitable for board mounting. It features solid backshell and solder termination, conforming to IEC standards. Ideal for applications requiring reliable female contact sockets in various electronic devices.
T4133412051-000
TE Connectivity's T4133412051-000 circular connector has a rated voltage of 60V and max operating temp of 85°C. With 5 contacts, it is ideal for applications requiring a female contact design, such as signal connections in environments with temperatures ranging from -40 to 85°C.
1977887-1
TE Connectivity's 1977887-1 is a threaded circular connector with a rated voltage of 600V. It has an insulator material made of polyamide and can operate in temperatures ranging from -55°C to 105°C. This connector is commonly used in applications requiring immersion resistance and features a plug body style with a total of 37 contacts.
10008
Belden
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1694224
The Phoenix Contact 1694224 is a threaded circular connector with gold termination finish. It has 5 contacts, UL reference standard, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring solid backshell and male plug connectors.
1200060649
HD10-9-1939PE
TE Connectivity's HD10-9-1939PE circular connector features GLASS FILLED POLYAMIDE insulator, 250V rated voltage, and 125°C max operating temp. With a total of 9 contacts, it is ideal for applications requiring a 13A signal current in panels with male contact gender and polarized key.
6-1394461-4
TE Connectivity 6-1394461-4 is a SNAP circular connector with POLYPHENYLENE OXIDE insulator. It features solid backshell, supports 10 AWG wire size, and has RND PIN-SKT contact style. Ideal for applications requiring solder termination and rated at 115/230VAC mains connector.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T4145015041-001
TE Connectivity T4145015041-001 is a circular connector with 4 contacts, nickel finish, and brass shell. It operates b/w -40 to 85°C, suitable for panel mounting applications. This female connector has a polarization key and is ideal for use in mains connectors at 115/230VAC.
T4141012081-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO; Shell Finish: NICKEL;
T4145015051-001
TE Connectivity T4145015051-001 is a circular connector with 5 contacts, nickel finish, and brass shell. It operates b/w -40°C to 85°C, suitable for applications requiring a polarized female receptacle with round pin sockets. Ideal for panel mounting in environments with 115/230VAC mains connector rating.
T4141012051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Empty Shell: YES; Total No. of Contacts: 5;
T4140012041-000
TE Connectivity T4140012041-000 is a circular connector with 4 male contacts, rated at 250V and 4A. It has a shell made of brass, nickel finish, and operates b/w -40 to 85°C. Ideal for board mounting applications requiring polarized connectors with solder termination.
T4141012041-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Shell Finish: NICKEL;
T4140012051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Panel Mount: NO; Filter Feature: NO;
T4145035051-001
TE Connectivity T4145035051-001 is a circular connector with EMI shielding, 5 contacts, and nickel finish. Operating from -40 to 85°C, it's ideal for applications requiring polarization key A, panel mounting, and mains connector rating of 115/230VAC.
T4145035041-001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO; Mixed Contacts: NO;
T4140012081-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Design: PREASSEM CONN; Rated Voltage: 30 V;
T4143012051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Contact Design: PREASSEM CONN;
T4140012121-000
TE Connectivity's T4140012121-000 circular connector has 12 contacts, rated at 1.5A and 30V, with a shell made of brass and nickel finish. It is a male plug connector with preassembled design, suitable for applications requiring polarization key and operating temperatures from -40 to 85°C.
T4145035081-002
TE Connectivity T4145035081-002 is a circular connector with EMI shielding, rated for 30V and operating temperatures from -40 to 85°C. It features a nickel finish, brass shell material, and polarization key A. Ideal for applications requiring a male contact gender, receptacle body style, and panel mounting.
T4143012081-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Design: PREASSEM CONN; MIL Conformity: NO;
T4143012031-000
Other Circular Connectors; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Rated Voltage: 250 V; Termination Type: SOLDER;
T4143012041-000
Other Circular Connectors; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Coupling Type: THREADED; Minimum Wire Size: 24 AWG;
T4143012121-000
TE Connectivity T4143012121-000 is a circular connector with 12 contacts, rated at 30V and 1.5A. It has a shell made of brass, nickel finish, and operates b/w -40 to 85°C. Ideal for panel mounting applications requiring polarized female contacts in a receptacle design.
T4145435051-001
TE Connectivity T4145435051-001 is a circular connector with EMI shielding, nickel finish, and 5 female contacts. It operates b/w -40 to 85°C, suitable for applications requiring polarization and panel mounting. Ideal for use in environments needing a polarized receptacle with 115/230VAC mains connector rating.
T4141L12051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 4; Termination Contact Finish: NOT APPLICABLE;
T4141512041-001
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 4; Mains Connector Rating: 4A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved