Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's T4113511051-000 is a threaded circular connector with EMI shielding, rated for 60V and 4A signal current. With brass shell material and nickel finish, it operates b/w -40 to 85°C, suitable for applications requiring durable male plug connectors with preassembled contacts.
Median Price
$9.396
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$7.675
100+ parts
$7.291
1k+ parts
10k+ parts
-
Verical
$8.510
$7.870
Heilind Electronics
$10.283
$8.258
Interstate Connecting
$11.211
$9.129
Element14
$12.320
$11.390
Newark
$15.140
$11.420
$10.780
TE Connectivity
$36.310
$31.470
$30.260
Master Electronics
$8.310
Chip1Stop
$8.130
Powell Electronics
$7.920
Farnell
Digiode
$1.843
VNN
$1.940
Nova Conductors
Vyrian
Rapid Electronics
IBS Electronics
$7.688
TME
$8.000
Semicontronic
$1.650
$1.609
$1.600
Corphita
$1.746
Advanced Electronics
Continental Prestige Electronics
$8.260
$6.390
Modulus Dynamics
$9.024
$8.934
$8.663
Aztec Data Supply Inc.
$9.676
Argo Parts USA
Provides protection against electromagnetic interference, ensuring reliable signal transmission.
Suitable for applications requiring a voltage rating of up to 60V.
Ensures a secure and stable connection, ideal for rugged environments.
Able to withstand high temperatures, making it versatile for various operating conditions.
Preassembled contacts simplify installation and maintenance processes.
Capable of functioning in extreme cold temperatures, expanding its usability.
Allows for customization and flexibility in designing connectors.
Provides corrosion resistance, ensuring longevity and durability.
Offers a standard design for compatibility with a wide range of applications.
Ensures proper alignment during connection, reducing the risk of damage.
Supports a signal current rating of up to 4A, suitable for various signal applications.
Offers easy identification of the correct orientation for connection, reducing errors.
Provides multiple contact points for enhanced functionality and connectivity.
Simplifies wiring and installation processes, saving time and effort.
Accommodates smaller wire gauges, suitable for compact and space-constrained applications.
Withstands frequent mating and unmating cycles, ensuring long-term reliability.
Supports larger wire gauges for higher current-carrying capacity.
Offers a robust and durable construction for reliable performance in harsh environments.
Suitable for mains power applications with a current rating of up to 4A.
Designed for male connections, ensuring compatibility with corresponding female connectors.
Features a plug-style body for easy and secure connections.
Utilizes a round pin/socket contact design for reliable signal transmission.
Standardized shell size for compatibility with a wide range of circular connector applications.
Other Function Circular Connectors T4113511051-000 attributes and parameters. Explore more Other Function Circular Connectors devices from TE Connectivity
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Shell Finish:
Shell Material:
Shell Size:
Total No. of Contacts:
Maximum Wire Size:
Minimum Wire Size:
T4113511051-000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
PCN Design/Specification - Material chg 10/MAR/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
EU2B-YS3303C
Idec
ROTARY SWITCH;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SR30-10PG-6P
Hirose Electric
The Hirose Electric SR30-10PG-6P is a threaded circular connector with 6 contacts, solid backshell, and brass/zinc alloy shell. It features chromium and nickel plating, solder termination, and male contact gender. Ideal for cable mounting applications in various industries requiring reliable connectivity.
1301460031
Molex
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
25218
Woodhead Industries
CIRCULAR CONNECTOR; MIL Conformity: NO; DIN Conformance: NO; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 25218;
T4061110004-001
TE Connectivity's T4061110004-001 circular connector features EMI shielding and a polarized design. With 4 contacts, it is suitable for applications requiring a mains connector rating of 115/230VAC. The solid backshell and round pin-socket contact style make it ideal for various industrial uses.
8413
Abb Installation Products
The ABB Installation Products 8413 is a SNAP circular connector with 2 FEMALE contacts. It features a SOLID backshell and is CORROSION RESISTANT, ideal for CABLE mounting applications.
206705-1
TE Connectivity 206705-1 is a threaded circular connector with 600V rating. Insulated with polyethylene, it operates b/w -55 to 105°C. Ideal for panel mounting applications, it has a total of 9 male contacts and mates with 206708-1.
120-1906-000
Itt Cannon
120-1906-000 by ITT Cannon is a SNAP circular connector with COPPER ALLOY contacts and SILVER finish. It features a SOLID backshell, ELASTOMERIC shell material, and is a MALE plug type suitable for CABLE mounting applications.
132056-9008
CIRCULAR CONNECTOR;
AHD16-9-1939SE
Amphenol
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
T4011008041-000
TE Connectivity T4011008041-000 is a threaded circular connector with EMI shielding, rated for 30V and 3A. With brass shell material, it has 8 contacts, male gender, and plug body style. Ideal for applications requiring polarization key and preassembled contact design in environments ranging from -40 to 85°C.
T4112511051-000
TE Connectivity's T4112511051-000 circular connector features EMI shielding, 60V rated voltage, and threaded coupling. Ideal for applications requiring a durable, polarized female connector with 5 contacts. Operating temperature range from -40 to 85°C makes it suitable for various environments.
327
Belden
The Belden 327 Circular Connector features a body diameter of 0.57" and depth of 1.692", suitable for temperatures ranging from -40 to 90°C. With a total of 5 contacts, it is designed with a solid backshell and polyethylene polyurethane shell material for cable mounting applications.
T4010008031-000
TE Connectivity's T4010008031-000 is a threaded circular connector with 3A signal current rating. Featuring PBT insulator, it operates b/w -40 to 85°C and has 100 durability cycles. Ideal for applications requiring a female receptacle connector with 3 contacts.
HDP26-24-9SN-L017
TE Connectivity's HDP26-24-9SN-L017 is a circular connector with 9 contacts, rated for 250V and 100A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting on cables.
192900-0266
192900-0266 by ITT Cannon is a circular connector with 12 contacts, bayonet coupling, and polyamide insulator. It features a solid backshell, corrosion-resistant design, and shell size of 14. Ideal for panel mounting applications requiring male contact gender in a receptacle body style.
1681169
Phoenix Contact
Phoenix Contact 1681169 is a threaded circular connector with gold contact finish, suitable for cable mounting. Featuring 4 contacts, polyamide shell material, and solder termination type. Ideal for applications requiring reliable male plug connections like SACC-M8FS-4CON-M mating info.
M12A-04PMMC-SF8B20
M12A-04PMMC-SF8B20 by Amphenol is a threaded circular connector with 4 contacts, made of glass-filled polyamide insulator and zinc alloy shell. It has a body diameter of 0.606" and depth of 0.906", suitable for cable and panel mounting applications. With a temperature range from -25°C to 85°C, it is ideal for waterproof connections in various industries.
T4113411041-000
TE Connectivity T4113411041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. With brass shell material and nickel finish, it has 4 male contacts suitable for applications requiring polarization and durability up to 100 cycles.
1200060016
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
UTG01412PH
Esterline Technologies
CIRCULAR CONNECTOR; Option: WATERPROOF; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T4111002081-000
TE Connectivity's T4111002081-000 is a threaded circular connector with 8 contacts, rated for 30V and 2A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male plug connectors with polarized keying.
T4111001041-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel; Shell Size: 20;
T4111001051-000
TE Connectivity's T4111001051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarization key in plug shell style.
T4110002081-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 8; Coupling Type: THREADED;
T4111011041-000
TE Connectivity's T4111011041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. With brass shell material, it operates b/w -40 to 85°C, suitable for applications requiring durable male plug connectors with polarized design.
T4111511051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Shell Material: BRASS; Panel Mount: NO;
T4111002051-000
TE Connectivity's T4111002051-000 is a threaded circular connector with 5 contacts, rated for 60V and 4A. Made of polybutylene terephthalate, it operates b/w -40°C to 85°C. Ideal for applications requiring durable male plug connectors with polarization key and shell size of 20.
T4113511041-000
TE Connectivity T4113511041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. Ideal for applications requiring durable male plug connectors with 4 contacts, operating in temperatures from -40 to 85°C.
T4112001041-000
TE Connectivity's T4112001041-000 is a threaded circular connector with 4A signal current rating. It features polybutylene terephthalate insulator, 85°C max operating temp, and 100 cycles durability. Ideal for applications requiring a polarized, female receptacle connector with 4 contacts in shell size 20.
T4111511041-000
TE Connectivity's T4111511041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. With brass shell material and nickel finish, it has 4 male contacts in a plug body style. Ideal for applications requiring durable connections in temperatures ranging from -40 to 85°C.
T4111002041-000
TE Connectivity's T4111002041-000 is a threaded circular connector with gold over nickel termination. Rated for 250V and 4A, it has 4 contacts and operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarized key in plug shell style.
T4113002081-000
TE Connectivity's T4113002081-000 is a threaded circular connector with 8 contacts, rated for 30V and 2A. Made of polybutylene terephthalate, it operates b/w -40 to 85°C. Ideal for applications requiring durable male connectors with polarized shells in industrial settings.
T4112002081-000
Other Circular Connectors; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Size: 20; Polarization: A;
T4111501041-000
TE Connectivity's T4111501041-000 is a threaded circular connector with 4A signal current rating. Made of PBT, it operates b/w -40 to 85 °C and has 100 durability cycles. Ideal for applications requiring male plug connectors with 4 contacts in a polarized D shell design.
T4110001051-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
T4112002021-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Wire Size: 24 AWG; Panel Mount: NO;
T4112511041-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Wire Size: 24 AWG; Filter Feature: NO;
T4113511031-000
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO; Shell Finish: NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved