Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's PM0SSDS30 is a mains power connector with 115/230VAC rating. It operates b/w -10 to 40°C, featuring a straight mounting style for panel installation. The connector is designed with an empty shell and commonly used in various electronic applications.
Median Price
$21.675
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Advanced Electronics
$5.278
$5.014
Aztec Data Supply Inc.
$7.860
AZTECH Wire
$15.853
Continental Prestige Electronics
$21.241
Netroflash
$20.591
$20.158
Authorized Procurement Solutions
Argo Parts USA
Corphita
Assy Fe
The high maximum operating temperature ensures that the connector can withstand heat and perform reliably even in extreme conditions.
The low minimum operating temperature ensures that the connector can still function effectively in cold environments, making it versatile for various applications.
The empty shell allows for customization and flexibility in terms of adding pins or components according to specific requirements, making it suitable for different configurations.
Being a mains power connector, it is designed to handle high voltage levels safely, making it a reliable choice for power connections.
The panel mounting type ensures easy and secure installation on panels or equipment, providing a stable connection point for power transmission.
The high mains connector rating of 115/230VAC indicates that the connector can handle standard voltage levels commonly used in household and industrial applications.
The straight mounting style simplifies the installation process and ensures a clean and organized setup, improving the overall appearance and functionality of the connector.
Mains Power Connectors PM0SSDS30 attributes and parameters. Explore more Mains Power Connectors devices from TE Connectivity
Connector Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
PM0SSDS30 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1554216004
Molex
WIRE AND CABLE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Taitron Components
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
4310.0029
Schurter Ag
Schurter Ag's 4310.0029 is a SNAP mains power connector with POLYAMIDE6 insulator material. It has 3 contacts, rated at 10/15A, 250VAC for cable mounting applications. IEC conformity ensures reliable performance in various electrical equipment.
PM0S0SS3A
Cii Technology
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mains Connector Rating: 10, 250 VAC; MIL Conformity: NO;
1548
Eaton Corporation
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DD21.0114.1111
Schurter Ag's DD21.0114.1111 is a SNAP mains power connector with 3 contacts, rated at 10A, 125VAC. It has a panel mounting type and uses solder termination. With IEC conformity and CSA/CUL standards, it is ideal for applications requiring reliable power connections in temperatures ranging from -25 to 85°C.
USB8300I
Hubbell
MAINS POWER CONNECTOR;
4302.0001
The Schurter Ag 4302.0001 is a SNAP mains power connector with POLYETHYLENE insulator material. It has 3 contacts, rated at 10A and 250VAC, suitable for panel mounting applications. This male quick connect connector is IEC compliant and ideal for various electronic devices requiring a reliable power connection.
10CE1
TE Connectivity
The TE Connectivity 10CE1 is a mains power connector with SNAP coupling, IEC conformity, and solder termination. It has 3 contacts and a rating of 115/230VAC, suitable for panel mounting applications following IEC 60320 standards.
DC11.0001.003
Schurter Ag's DC11.0001.003 is a mains power connector with dimensions 1.73" x 1.33" x 1.43". It has a max operating temperature of 70°C and conforms to IEC standards, suitable for panel mounting applications at 15A, 250VAC rating with quick connect termination.
KM01.1105.11
KM01.1105.11 by Schurter Ag is a mains power connector with dimensions 1.96" x 1.2" x 1.29". It has a max operating temperature of 70°C and conforms to IEC standards, suitable for applications requiring a male quick connect termination type at 10A, 250VAC rating on panels.
PX0597
Bulgin
The Bulgin PX0597 is a mains power connector with SNAP coupling, POLYAMIDE insulator, and BRASS contacts. It has 3 contacts, rated at 10A, 250VAC for FEMALE termination on CABLE mounting. Ideal for IEC conformity applications requiring reliable power connections.
3-103-872
The Schurter Ag 3-103-872 is a mains power connector with SNAP coupling, POLYAMIDE6 insulator, and 70°C max operating temp. Ideal for panel mounting applications, it has 3 male contacts and meets CSA/UL standards.
4EDL1SCM
Corcom
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Manufacturer Series: L; Coupling Type: SNAP;
PS0S0DH3B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; No. of Ports: 1; Minimum Operating Temperature: -10 Cel;
DD11.0113.1111
Schurter Ag's DD11.0113.1111 is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10A, 250VAC rating. Ideal for panel mounting applications in environments ranging from -25 to 85°C. Compliant with IEC standards and suitable for various industrial uses.
5-1609075-0
TE Connectivity 5-1609075-0 is a mains power connector with 115/230VAC rating. It operates b/w -10°C to 55°C, featuring a straight mounting style and an empty shell design. Ideal for applications requiring reliable power connections in various electronic devices.
560P9W
PX0590/63/WH
Bulgin PX0590/63/WH is a mains power connector with 3 contacts, rated at 10/15A, 250/125VAC. Featuring snap coupling and polyamide insulator, it has brass contacts with tin finish for solder termination. Ideal for IEC conformity applications requiring reliable male panel mounting connectors.
1628114
Phoenix Contact
PS0SSDSXA
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Mounting Type: PANEL; MIL Conformity: NO;
160
Mennekes Elektrotechnik & Kg
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SCREW; Coupling Type: SNAP; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PM0S0DH3B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Filter Feature: NO; Maximum Operating Temperature (Cel): 40; DIN Conformance: NO; Panel Mount: NO;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; Mains Connector Rating: 10, 250 VAC; Coupling Type: SNAP;
PM0S0DH6B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARDS: CSA; UL; VDE; Coupling Type: SNAP; Mains Connector Rating: 10, 250 VAC;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; Filter Feature: NO; EMI Shielded: NO; Termination Contact Finish: NOT APPLICABLE;
PM0SSSSX0
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; MIL Conformity: NO; Coupling Type: SNAP;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; No. of Ports: 1; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED; Mounting Type: PANEL;
TE Connectivity's PM0S0SS3A is a mains power connector with 115/230VAC rating. It operates b/w -10 to 40°C, featuring a straight mounting style for panel installation. The connector includes an empty shell and is ideal for various applications requiring reliable power connections.
PM0SSDS30
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Coupling Type: SNAP; Total No. of Contacts: 3;
PM0S0DHX0
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARDS: CSA; UL; VDE; Total No. of Contacts: 3; Coupling Type: SNAP;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; No. of Ports: 1; EMI Shielded: NO; Termination Contact Finish: NOT APPLICABLE;
PM0S0DH30
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; IEC Conformity: NO; Coupling Type: SNAP;
TE Connectivity's PM0S0DH30 is a mains power connector with a max operating temperature of 40°C and a min operating temperature of -10°C. It features one port and can be mounted on a panel. This connector is suitable for applications requiring 115/230VAC power connection.
PM0S0DS6B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 40; Panel Mount: NO; Contact Material: NOT SPECIFIED;
TE Connectivity's PM0S0DS6B is a SNAP mains power connector with 3 contacts, rated for 115/230VAC. Operating temperature range from -10 to 40°C, suitable for panel mounting applications. Features straight mounting style and male contact gender, making it ideal for various industrial and commercial electrical connections.
PM0S0SS3B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 3; IEC Conformity: NO; Additional Features: STANDARDS: CSA; UL; VDE;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; IEC Conformity: NO; Panel Mount: NO;
PM0SSDSX0
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Mains Connector Rating: 115/230VAC; EMI Shielded: NO; Mounting Type: PANEL; IEC Conformity: NO;
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARDS: CSA; UL; VDE; MIL Conformity: NO; Mounting Type: PANEL;
PM0SSDS3B
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Mounting Style: STRAIGHT; Mounting Type: PANEL; Filter Feature: NO; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved