Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's MSLPT5252BL4MTR is a SPST Keypad Switch with SILVER actuator. It has a max operating force of 2.548N, suitable for PANEL MOUNT applications. With POLYETHYLENE housing and STAINLESS STEEL end contact material, it operates b/w -25°C to 70°C temperature range.
Median Price
$0.525
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.530
100+ parts
$0.377
1k+ parts
$0.311
10k+ parts
-
TE Connectivity
$0.720
$0.660
$0.610
$0.590
Element14
$0.520
$0.393
Newark
$0.410
Nova Conductors
$0.329
Bristol Electronics
$0.750
$0.278
$0.210
Vyrian
Netroflash
Argo Parts USA
$0.319
Continental Prestige Electronics
$0.253
The silver color of the actuator gives a sleek and modern look to the keypad switch, enhancing its overall aesthetic appeal.
Polyethylene is a durable and lightweight material, making the housing of the switch resistant to impact and wear, ensuring a longer lifespan.
Single Pole, Single Throw (SPST) switch function provides a simple on/off operation, making it easy to use and suitable for various applications.
With a high maximum operating temperature of 70°C, this keypad switch can perform reliably in a wide range of environmental conditions.
The maximum AC contact current of 0.05A indicates that this keypad switch can handle low voltage applications efficiently.
The minimum operating temperature of -25°C allows the keypad switch to function effectively even in cold environments without any performance issues.
Stainless steel end contact material ensures durability, corrosion resistance, and reliable electrical conductivity, making this keypad switch a long-lasting choice.
The keypad switch design offers multiple switches in a compact layout, providing convenient and quick access to various functions, making it suitable for applications where space is limited.
Silver center contact plating ensures good electrical conductivity and resistance to oxidation, maintaining the switch's performance over time.
The black body color of the keypad switch adds a professional and sleek appearance, making it blend well with various devices or equipment.
TR packing method ensures convenient packaging and handling of the keypad switches during transportation and storage.
With a maximum operating force of 2.548N, users can easily press the keypad switch buttons without excessive effort, enhancing user experience and comfort.
The maximum DC contact current of 0.05A indicates that this keypad switch is suitable for low-power DC applications, ensuring stable and reliable performance.
Solder termination type allows for secure and reliable soldering connections, ensuring long-term electrical connectivity and stable operation of the keypad switch.
Panel mount feature allows for easy and secure installation of the keypad switch on panels or surfaces, providing a stable and fixed position for convenient operation.
Polytetrafluoroethylene actuator material offers excellent chemical resistance, low friction, and high durability, ensuring smooth operation and longevity of the keypad switch.
Keypad Switches MSLPT5252BL4MTR attributes and parameters. Explore more Keypad Switches devices from TE Connectivity
Color (Actuator):
Material (Actuator):
Body Color:
Center Contact Plating:
Maximum AC Contact Current:
Maximum DC Contact Current:
End Contact Material:
Housing Material:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Function:
Switch Type:
Termination Type:
MSLPT5252BL4MTR Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Packaging - Multiple Devices Packaging MSL 05/Apr/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Multicomp Pro
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Continental Device India
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Protek Devices
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
KSC341GLFS
Itt Cannon
KSC341GLFS by ITT Cannon is a SPST keypad switch with SILVER plating, IP67 sealing, and 1VA@32VDC power rating. Ideal for applications requiring a hard type actuator, it operates b/w -40 to 85 °C and has a max contact bounce time of 1 ms. Suitable for surface mount-straight mounting, it offers momentary-tactile switch action in a compact 6.2mm body size.
KSC351GLFS
C & K Components
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): HARD TYPE; Solderability: REFLOW; Actuator Travel (mm): 0.25;
1301.9316
Schurter Ag
The Schurter Ag 1301.9316 keypad switch features SPST switch function, brass terminals, and IP40 sealing. With a max operating force of 2.1N and electrical life of 100000 cycles, it is ideal for applications requiring momentary-tactile switch action in electronic devices.
SKHHBWA010
Alps Electric
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): STEM; PCB Hole Count: 4; Insulation Resistance: 100000000 ohm;
MCSLPT4644B3TR
TE Connectivity's MCSLPT4644B3TR is a SPST Keypad Switch with POLYETHYLENE housing and COPPER ALLOY terminals. With 500000 cycles electrical life, it's ideal for panel mounting applications requiring 0.2mm actuator travel and 1.96N max operating force.
JJJHLUG200NOPMRTR
TE Connectivity's JJJHLUG200NOPMRTR is a BROWN SPST Keypad Switch with 0.05A AC/DC contact current. Featuring STAINLESS STEEL end contacts and SILVER plating, it is ideal for PANEL MOUNT applications requiring OFF-(ON) functionality.
B3FS-1000
Omron
Omron B3FS-1000 keypad switch has 1M cycle electrical life, SPST switch function, and 5ms max contact bounce time. Ideal for surface mount applications with -25 to 70°C operating temp range.
ADTSM644YV
Apem Components
ADTSM644YV by Apem Components is a black keypad switch with stainless steel housing. It has SPST switch function, 100000 cycle electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -25 to 70 °C.
KSC351JLFS
KSC351JLFS by ITT Cannon is a SPST keypad switch with 100000 cycle electrical life and IP67 sealing, suitable for surface mount applications. It has a max DC contact voltage of 32V and a max operating force of 5.5N, making it ideal for use in rugged environments requiring reliable tactile feedback. With SILVER end contact plating and termination type SOLDER, this switch offers high insulation resistance of 1Gohm and operates within a temperature range of -40 to 85°C.
EVQQ2Y01W
Panasonic
The Panasonic EVQQ2Y01W is a SPST keypad switch with 100000 cycle electrical life and 100000000 ohm insulation resistance. With a max operating force of 3.5N, it is ideal for applications requiring ON-OFF contact function in temperatures ranging from -40 to 85°C.
5GTH935+1SS09-09.5
The Apem Components 5GTH935+1SS09-09.5 is a black keypad switch with PPS housing material, IP67 sealing, and SPST switch function. It has an electrical life of 10M cycles and insulation resistance of 10M ohm, making it ideal for applications requiring high durability and reliability in harsh environments. With a max operating temperature of 160°C and min of -40°C, this round type switch is suitable for various industrial control systems that demand precision and longevity.
5GTH935+1SS09-11.0
5GTH935+1SS09-11.0 by Apem Components is a black keypad switch with PPS housing material, IP67 sealing, and SPST switch function. It has an electrical life of 10M cycles and insulation resistance of 10M ohm, suitable for applications requiring a durable and reliable keypad switch with momentary action.
7914S-1-000
Bourns
Bourns 7914S-1-000 is a SPST Keypad Switch with STAINLESS STEEL housing and PHOSPHOR BRONZE terminals. It offers an Insulation Resistance of 100MΩ, suitable for applications requiring SNAP ACTION contact timing and 0.1A@16VAC AC Max Rating R Load.
1241.1106.7098
Schurter Ag's 1241.1106.7098 Keypad Switch features SPST switch function, IP65 sealing, and 1000000 cycle electrical life. Ideal for panel mount applications with a max operating temperature of 60°C and -25°C min temperature.
3-1825910-1
TE Connectivity 3-1825910-1 is a black keypad switch with nylon housing and copper alloy terminals. With SPST switch function, it has an electrical life of 100000 cycles. Ideal for panel mounting applications, it offers momentary switch action and operates b/w -35°C to 85°C.
EVQQ2K02W
The Panasonic EVQQ2K02W is a SPST keypad switch with 1000000 cycles electrical life and 100000000 ohm insulation resistance. Ideal for applications requiring ON-OFF contact function, it operates b/w -40 to 85 °C with a max DC voltage of 15V.
KMR221GLFS
KMR221GLFS by ITT Cannon is a 2.8" keypad switch with IP40 sealing, SPST function, and 1ms contact bounce time. Ideal for surface mount applications, it has a max operating force of 2.5N and operates b/w -40°C to 85°C temperature range.
2-1437565-7
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; JESD-609 Code: e4; Body Height: 3.6 mm; Minimum Operating Temperature: -35 Cel;
3FSH9R
The Apem Components 3FSH9R is a keypad switch with POLYPHENYLENE SULPHIDE housing, IP67 sealing, and SPST switch function. It has a max operating temperature of 160°C and min of -40°C. Ideal for applications requiring a momentary pushbutton switch with surface mount-straight mounting feature.
KPHC-ALU100K4C4P6
Phoenix Contact
MEMBRANE KEYBOARD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MSLPT5252BL3MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Color: BLACK; Maximum Operating Temperature: 70 Cel; Packing Method: TR;
MSLPT5252BL2MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Material (Actuator): POLYTETRA FLUOROETHYLENE; Maximum Operating Temperature: 70 Cel; Maximum DC Contact Current: .05 A;
MSLPT5252BL1MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Center Contact Plating: SILVER; Termination Type: SOLDER; Maximum Operating Force: .686 N;
MSLPT5252CL3BTR
TE Connectivity's MSLPT5252CL3BTR is a black keypad switch with SPST function. Made of polyethylene, it has a max operating temperature of 70°C and can handle up to 0.05A AC/DC contact current. Ideal for panel mounting applications requiring a durable and reliable switch solution.
MSLPT5252CG3BTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Packing Method: TR; Body Color: BLACK; End Contact Material: STAINLESS STEEL;
MSLPT5252CL1BTR
TE Connectivity's MSLPT5252CL1BTR is a black keypad switch with SPST function. Made of polyethylene, it has a max operating temperature of 70°C and can handle up to 0.05A AC/DC current. Ideal for panel mounting applications requiring a durable and reliable switch solution.
MSLPT5252CL2WTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Housing Material: POLYETHYLENE; Body Color: BLACK; Maximum DC Contact Current: .05 A;
MSLPT5252CL4WTR
TE Connectivity's MSLPT5252CL4WTR is a WHITE Keypad Switch with POLYETHYLENE housing. It operates b/w -25 to 70 °C, with SPST switch function and 0.05 A AC contact current. Ideal for PANEL MOUNT applications, it features SILVER plating on center contacts and STAINLESS STEEL end contacts.
MSLPT5252CG2WTR
TE Connectivity's MSLPT5252CG2WTR is a WHITE keypad switch with POLYETHYLENE housing. It operates b/w -25 to 70 °C, with SPST function and 0.05 A AC/DC contact current. Ideal for PANEL MOUNT applications, featuring SILVER plating and 0.98 N operating force.
MSLPT5252AG4TR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLUSH TOP TYPE; DC Maximum Rating R Load (Contact): 0.05A@12VDC; Packing Method: TR;
MSLPT5252AG3TR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLUSH TOP TYPE; DC Maximum Rating R Load (Contact): 0.05A@12VDC; End Contact Plating: SILVER OVER NICKEL;
MSLPT5252BG3MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Color (Actuator): SILVER; Maximum DC Contact Voltage: 12 V;
MSLPT5252BG2MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Circuit Config: 1X1; Additional Features: LOW PROFILE;
MSLPT5252CG1BTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Color: BLACK; Termination Type: SOLDER; Center Contact Plating: SILVER;
MSLPT5252BG4MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Actuator Travel (mm): 0.25; Housing Material: POLYETHYLENE;
MSLPT5252BG1MTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Center Contact Plating: SILVER; Terminal Material: COPPER ALLOY;
MSLPT5252AL3TR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLUSH TOP TYPE; Material (Actuator): POLYTETRA FLUOROETHYLENE; Minimum Operating Temperature: -25 Cel;
MSLPT5252AL4TR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLUSH TOP TYPE; End Contact Material: STAINLESS STEEL; Maximum Operating Force: 2.548 N;
MSLPT5252CG4WTR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Color: BLACK; Maximum AC Contact Current: .05 A; Material (Actuator): POLYETHYLENE;
MSLPT5252AL2TR
KEYPAD SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLUSH TOP TYPE; Termination Type: SOLDER; Maximum Operating Force: .98 N;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved