Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's LVR100S is a non-linear resistor used for overload protection. It has a rated AC voltage of 240V and a power dissipation of 2.9W. With its radial terminal placement and disk package shape, it is ideal for through hole mounting applications.
Median Price
$0.660
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Arrow
1+ parts
$0.487
100+ parts
1k+ parts
10k+ parts
Chip1Stop
$0.832
-
Nova Conductors
$0.859
Martec Srl
Continental Prestige Electronics
$0.841
Argo Parts USA
Netroflash
$0.816
$0.798
Authorized Procurement Solutions
Perfect Parts
Overload Protection - This product is ideal for providing protection against excessive current or voltage, ensuring the longevity and safety of electronic equipment.
Radial - The radial placement of terminals allows for easy and secure connection, ensuring stability and reliability in various applications.
Disk Package - With a disk-shaped package, this product offers compact and efficient utilization of space, making it suitable for applications with limited area.
Bulk - The bulk packing method provides a cost-effective and convenient solution for purchasing and handling large quantities of these non-linear resistors.
2 - Featuring two terminals, this product facilitates simple installation and enables efficient electrical connections.
240 V - With a high rated AC voltage, this non-linear resistor can effectively withstand and regulate electrical fluctuations, ensuring stable operation and protection.
Wire - The wire-shaped terminals enable easy insertion and secure connection, enhancing the convenience and durability of this product.
Tin - With a tin finish, these terminals offer excellent conductivity and corrosion resistance, ensuring reliable performance and longevity.
PTC Thermistor - This product utilizes positive temperature coefficient (PTC) thermistor technology, providing precise and rapid response to changes in temperature, guaranteeing effective and dependable overload protection.
Through Hole Mount - The through hole mounting design allows for secure and stable installation, making this product suitable for various circuit board applications.
2.9 W - With a high rated power dissipation, this non-linear resistor can effectively handle and dissipate excess heat, preventing potential damage or malfunction in electronic circuits.
Non-linear Resistors LVR100S attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Additional Features:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
LVR100S Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
GA1K2A1
TE Connectivity
TE Connectivity's GA1K2A1 is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is used for temperature sensing applications.
ASMD050F-2
TE Connectivity's ASMD050F-2 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and max temp of 85°C. It features dual-ended terminals in a rectangular package for temperature sensing applications using surface mounting method.
B72220S3301K101
Epcos Ag
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 300 V; No. of Terminals: 2;
RF1350-000
TE Connectivity's RF1350-000 is a PTC resettable fuse with dual-ended terminals for temperature sensing applications. With an operating voltage of 30V, it has a max temperature of 85°C and min of -40°C. This surface mount thermistor has SMT package style, TR packing method, and wraparound terminal shape.
SMD100F-2018-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; Maximum Circuit DC Voltage: 15 V;
MINISMDC014F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND;
RXEF250K
TE Connectivity's RXEF250K is a PTC thermistor with resistance of 0.05 ohm, rated power dissipation of 2.5W, and URac of 72V. It is used for temperature sensing applications due to its radial terminal placement and disk package shape. Operating temperatures range from -40°C to 85°C making it suitable for various environments.
MICROSMD110F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .07 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Packing Method: TR, EMBOSSED, 7 INCH;
1206L025YR
1206L025YR by Littelfuse is a PTC resettable fuse with 0.55 ohm resistance and 16V operating voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it operates b/w -40 to 85 °C temperature range.
V05P25P
V05P25P by Littelfuse is a VARISTOR with 2.5J energy capacity, 25V RMS voltage, and 31V operating voltage. It has METAL OXIDE FILM tech, RADIAL terminal placement, and THROUGH HOLE mounting type. Ideal for surge protection in electronics due to its high energy absorption and voltage ratings.
V20E25P
V20E25P by Littelfuse is a 1W VARISTOR with 77J energy capacity, suitable for surge protection in various applications. With a max operating temp of 85°C and -40°C min, it offers protection against voltage spikes up to 31V RMS and DC. Its radial package style makes it ideal for through-hole mounting.
MF-SM100-2-99
The Bourns MF-SM100-2-99 is a PTC resettable fuse with a resistance of 0.48 ohm and rated AC voltage of 30V. It is used for overload protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
ERTJ0EV474J
Panasonic
Panasonic ERTJ0EV474J is a NTC thermistor with 470000 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4750 K. With dual-ended terminals and SMT package style, it operates b/w -40 to 125 °C for precise control.
RXEF110-AP
TE Connectivity's RXEF110-AP is a PTC resettable fuse with resistance of 0.15 ohm and rated power dissipation of 1.5W. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape. Operating b/w -40°C to 85°C, it has a rated AC voltage of 72V and through-hole mounting method.
1812L125/16DR
1812L125/16DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, dual-ended terminals, and rectangular SMT package. It is used for overcurrent protection in various applications. Operating temperature ranges from -40 to 85 °C with max DC voltage of 16 V.
11032562-00
TE Connectivity's 11032562-00 is a non-linear resistor with 10000 ohm resistance, suitable for temperature sensing applications. Featuring radial terminal placement and flexible wire shape, it operates b/w -40 to 150 °C with high thermal sensitivity index of 3978 K. Ideal for chassis mounting, this component has two terminals and a lead length of 76 mm.
ERTJ1VG103FA
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
MF-RX300/72-0
Bourns MF-RX300/72-0 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 72V. It is used for overcurrent protection in applications requiring radial terminal placement and through-hole mounting. With a compact rectangular package, it offers reliable circuit protection with temperature range from -40°C to 85°C.
B72220-S300-K101
TDK
The TDK B72220-S300-K101 is a VARISTOR with 26J energy capacity, 30V RMS voltage, and -40 to 85°C operating range. Its RADIAL terminals make it suitable for THROUGH HOLE MOUNT applications requiring surge protection in various electronic circuits.
RXEF185K-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Packing Method: AMMO PACK; Terminal Shape: WIRE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LVR100S-240-2
LVR100S-240-2 by Littelfuse is a PTC resettable fuse used for overcurrent protection. It has a resistance of 0.218 ohm and can operate at temperatures ranging from -40 to 85 °C. Its radial terminal placement and through hole mounting make it easy to install in various applications.
LVR100S-240
TE Connectivity's LVR100S-240 is a PTC resettable fuse resistor with a resistance of 0.218 ohm and max operating temperature of 85°C. It is used for temperature sensing applications, has radial terminal placement, and can handle a max circuit RMS voltage of 240V.
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2;
LVR100S
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 2.9 W; Packing Method: BULK; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: WIRE;
LVR100K-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: CSA; TUV; UL; Terminal Shape: WIRE;
LVR100K-240-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 240 V; Terminal Shape: WIRE;
LVR100K-240-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 240 V; Package Style (Meter): Radial;
LVR100S-240-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .218 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; Operating Voltage: 240 V;
LVR125K-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 240 V; Package Style (Meter): Radial;
LVR125K-240-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 21.2 mm; Minimum Operating Temperature: -40 Cel;
LVR125K-240-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 240 V; Reference Standard: CSA; TUV; UL;
LVR125S
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 3.3 W; Rated AC Voltage (URac): 240 V; Terminal Finish: TIN; Thermistor Application: OVERLOAD PROTECTION;
LVR125S-240
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 21.2 mm; Height (Package): 27.4 mm;
LVR125S-240-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 240 V; Terminal Placement: RADIAL;
LVR125S-240-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .165 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): 27.4 mm; Terminal Placement: RADIAL;
LVR100S-1
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 2.9 W; Terminal Placement: RADIAL; Terminal Finish: TIN; Rated AC Voltage (URac): 240 V;
LVR100S-2
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 2.9 W; JESD-609 Code: e3; Packing Method: TR; Terminal Finish: TIN;
LVR100S-AP
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 2.9 W; Rated AC Voltage (URac): 240 V; Thermistor Application: OVERLOAD PROTECTION; Terminal Shape: WIRE;
LVR125S-AP
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 3.3 W; JESD-609 Code: e3; Additional Features: RESISTANCE VARIES FROM 0.17 TO 0.18; Rated AC Voltage (URac): 240 V;
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 3.3 W; Thermistor Application: OVERLOAD PROTECTION; Rated AC Voltage (URac): 240 V; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved