Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's HSA25R68J is a 25W fixed resistor with 0.68 ohm resistance, suitable for chassis mount applications. Featuring wire wound technology and 5% tolerance, it operates at 500V with a temperature coefficient of 50 ppm/°C. Dimensions are 51mm x 28mm x 15mm in a rectangular package.
Median Price
$5.660
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Master Electronics
1+ parts
$2.871
100+ parts
$2.610
1k+ parts
$2.260
10k+ parts
$1.740
Farnell
$4.750
$1.820
-
TE Connectivity
$4.760
Newark
$5.780
$3.050
$2.490
Mouser Electronics
$6.000
$3.160
$2.320
DigiKey
$7.230
$3.624
$2.850
Element14
$8.340
$4.150
PEI Genesis
Verical
$2.930
Chip1Stop
$3.140
Nova Conductors
$2.109
Vyrian
TME
$2.645
$2.644
Rapid Electronics
IBS Electronics
$2.450
$1.988
Aztec Data Supply Inc.
$0.411
Semicontronic
$2.060
$2.008
$1.998
Aranea Global
$2.067
$1.984
Argo Parts USA
Advanced Electronics
$2.150
Continental Prestige Electronics
$2.340
$1.340
$1.290
Modulus Dynamics
$2.341
$2.318
$2.248
Andel Nordic
$6.474
$6.215
Assy Fe
Ensures stable performance in normal operating conditions.
Provides high precision and reliability in resistance.
Can handle high voltage applications with ease.
Capable of dissipating high power effectively.
Offers precise resistance value for specific applications.
Provides acceptable range of deviation in resistance value.
Compact size allows for easy installation in various equipment.
Fixed Resistors HSA25R68J attributes and parameters. Explore more Fixed Resistors devices from TE Connectivity
Additional Features:
Construction:
Mounting Type:
No. of Terminals:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Dimensions:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
Operating Voltage:
HSA25R68J Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.29.00.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
Weitron Technology
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
Transys Electronics
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
First Components International
CRCW06034K70FKEAC
Vishay Intertechnology
Vishay Intertechnology's CRCW06034K70FKEAC is a fixed resistor with 4700 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55°C to 155°C.
RC0603JR-0756KL
Yageo
Yageo's RC0603JR-0756KL is a fixed resistor with 56000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics due to its SMT package style.
ERJ3EKF1001V
Panasonic
Panasonic's ERJ3EKF1001V is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RP73PF1E1K0BTDF
TE Connectivity's RP73PF1E1K0BTDF is a thin film fixed resistor with 1000 ohm resistance, 0.1% tolerance, and 0.1 W power dissipation. It is used in surface mount applications for temperature-sensitive circuits due to its 70-155 °C operating range and low temperature coefficient of 25 ppm/°C.
CRCW060310K0FKEA
Vishay Intertechnology's CRCW060310K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 75 V.
MCLRP12JTWRR082
Multicomp Pro
MCLRP12JTWRR082 by Multicomp Pro is a SMT fixed resistor with 0.082 ohm resistance, 5% tolerance, and 3W power dissipation. Ideal for surface mount applications in electronics due to its compact size (6.4mm x 3.2mm x 0.7mm) and operating temperature range of -55°C to 170°C.
ACS5SR22J
Arcol Uk
FIXED RESISTOR; Resistance: .22 ohm; Rated Power Dissipation (P): 5 W; Maximum Operating Temperature: 350 Cel; Tolerance: 5 %; Minimum Operating Temperature: -55 Cel;
RK73H1JTTD4532F
Koa Speer Electronics
RK73H1JTTD4532F by Koa Speer Electronics is a fixed resistor with 45300 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
CRG1206F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CRCW060349K9FKEAC
Vishay Intertechnology's CRCW060349K9FKEAC is a fixed resistor with 49900 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
MCS04020C1001FE000
Vishay Intertechnology's MCS04020C1001FE000 is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and operating temperatures ranging from -55 to 125 °C.
AC0402FR-071KL
Yageo's AC0402FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 °C to 155 °C efficiently.
RC0402FR-0722KL
Yageo's RC0402FR-0722KL is a fixed resistor with 22000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55°C to 155°C.
CRG0805F100K
TE Connectivity's CRG0805F100K is a 100000 ohm fixed resistor with 1% tolerance. With a rated power dissipation of 0.125W, it operates b/w -55 to 155 °C. Ideal for surface mount applications in various electronic circuits.
CRCW120610K0FKEAC
Vishay Intertechnology's CRCW120610K0FKEAC is a 1206 size fixed resistor with 10000 ohm resistance and 1% tolerance. It operates b/w -55 to 155 °C, suitable for surface mount applications with a rated power dissipation of 0.25 W. Ideal for temperature-sensitive electronic circuits requiring precise resistance values in compact designs.
CSR1206JTR270
Stackpole Electronics
CSR1206JTR270 by Stackpole Electronics is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 5%. It has a max operating temperature of 155 °C and is suitable for surface mount applications.
5WD22
Nte Electronics
The Nte Electronics 5WD22 is a wirewound fixed resistor with a resistance of 0.22 ohm and power dissipation of 5W. It features a diameter of 0.8mm, operating voltage of 200V, and temperature coefficient of 300 ppm/°C. Ideal for applications requiring precise resistance values in electronic circuits.
PCF0805R-1K2BT1
Tt Electronics Plc
PCF0805R-1K2BT1 by Tt Electronics Plc is a SMT fixed resistor with 1200 ohm resistance, 0.1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics due to its thin film technology and operating voltage of 100V. Temperature coefficient of 25 ppm/°C ensures stable performance from -55 to 125 °C.
ERJ8ENF1000V
ERJ8ENF1000V by Panasonic is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RC0201JR-070RL
Yageo's RC0201JR-070RL is a SMT fixed resistor with 0 ohm resistance, METAL GLAZE/THICK FILM tech, and rated for -55 to 125 °C. Ideal for jumper applications in electronics due to its small 0.6mm length, 0.3mm width, and 0.23mm height package size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSA25180RJ
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 180 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Rated Temperature: 25 Cel;
HSA255K6J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 5600 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Dimensions: 51mm x 28mm x 15mm;
HSA252K2J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Shape (Package): RECTANGULAR PACKAGE;
HSA254K7J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Shape (Package): RECTANGULAR PACKAGE;
HSA25470RJ
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 470 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Technology: WIRE WOUND;
HSA25R10J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .1 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Height (Package): 15 mm;
HSA2568RJ
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 68 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Operating Voltage: 500 V;
HSA25R50J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .5 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Dimensions: 51mm x 28mm x 15mm;
HSA252R2J
TE Connectivity's HSA252R2J is a 2.2 ohm wire wound fixed resistor with 5% tolerance, rated for 25W power dissipation at 500V operating voltage. Its rectangular chassis mount package makes it suitable for various applications requiring high-power resistance in bulk or tray packaging.
HSA25220RJ
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 220 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Terminal Shape: LUG;
HSA256K8J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 6800 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Rated Temperature: 25 Cel;
HSA25R47J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .47 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Temperature Coef (ppm/Cel): 50;
HSA251R2J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 1.2 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Height (Package): 15 mm;
HSA252R0J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 2 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Operating Voltage: 500 V;
HSA251R0J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Rated Temperature: 25 Cel;
HSA25R619F
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .619 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 1 %; Width (Package): 28 mm;
HSA25R62G
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .62 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 2 %; Construction: Rectangular;
HSA25R62J
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .62 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 5 %; Operating Voltage: 550 V;
HSA25R68K
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .68 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 10 %; Temperature Coef (ppm/Cel): 50;
HSA25R698F
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .698 ohm; Rated Power Dissipation (P): 25 W; Tolerance: 1 %; Terminal Shape: LUG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved