Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's HDP24-24-16SN is a circular connector with 16 contacts, rated at 250V and 25A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting option.
Median Price
$19.980
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
TTI
1+ parts
$12.130
100+ parts
$11.490
1k+ parts
$11.370
10k+ parts
-
TE Connectivity
$17.420
$10.800
$8.710
Mouser Electronics
$15.270
$13.590
DigiKey
$14.963
$14.505
Master Electronics
$22.270
$14.370
$13.850
Verical
Digiode
$16.549
VNN
IBS Electronics
$31.234
$20.154
$19.425
Vyrian
Nova Conductors
LJR Electronics
Modulus Dynamics
$7.967
Corphita
$15.678
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Aranea Global
EMSNET (Excess)
Compact size makes it suitable for applications where space is limited.
Provides a good balance between compactness and ease of handling.
Suitable for applications where depth is a critical factor.
Can handle high voltage applications effectively.
Provides good insulation properties for reliable performance.
Can withstand high temperatures without affecting performance.
Ideal for use in extreme cold environments.
Allows for custom configurations and easy assembly.
Provides secure and reliable connections in various applications.
Meets strict safety standards for flammability resistance.
Capable of handling high current signal transmissions.
Complies with industry standards for quality and safety.
Provides ample connectivity options for a range of devices.
Enhances durability and protection for the connector.
Simplified design for easy installation and maintenance.
Suitable for panel installations for easy access and organization.
Suitable for high current mains power applications.
Compatible with male connectors for secure connections.
Designed to receive and secure the corresponding male connector.
Provides a reliable electrical connection between devices.
Helps prevent damage to the cable and ensures long-term reliability.
Standard size for compatibility with various accessories.
Other Function Circular Connectors HDP24-24-16SN attributes and parameters. Explore more Other Function Circular Connectors devices from TE Connectivity
Backshell Type:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Shell Size:
Total No. of Contacts:
UL Flammability Code:
HDP24-24-16SN Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
PCN Design/Specification - Mult Devs - material chg 01/JUL/2021 Tooling Capacity 18/FEB/2021
PCN Assembly/Origin - Molding process chg 13/SEP/2022
PCN Packaging - Multiple Devices Packaging 22/Aug/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1552200253
Molex
WIRE AND CABLE;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
35632
Woodhead Industries
CIRCULAR CONNECTOR; Manufacturer Series: 35632; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
2213858-1
TE Connectivity 2213858-1 is a circular connector with body diameter of 1.437" and insulator made of POLYBUTYLENE TEREPHTHALATE. It has 4 contacts, rated current of 1.5A, and operates b/w -40 to 90°C. Ideal for applications requiring a reliable connector in environments with temperature fluctuations.
M12A-03PFFS-SF8001
Amphenol
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1-1589061-3
TE Connectivity 1-1589061-3 is a SNAP circular connector with 19 contacts, suitable for panel mounting. It has a temperature range of -55 to 200°C and supports wire size up to 30 AWG. Ideal for applications requiring female contact gender and receptacle body style with nickel finish shell material.
UTS78E2P
Souriau-sunbank Connection Technologies
1-2273002-1
TE Connectivity 1-2273002-1 is a circular connector with 4 contacts, rated for 30V. It features plastic insulator, blue color, and polarization key. Operating temperature ranges from -30 to 80 °C. Suitable for applications requiring a polarized circular connector with a max wire size of 22 AWG.
T4112511041-000
TE Connectivity's T4112511041-000 is a threaded circular connector with EMI shielding, rated for 250V and 4A signal current. With a shell size of 20, it has a brass shell finish and female contact gender. Ideal for applications requiring durable connections in environments ranging from -40°C to 85°C.
FFA.2S.304.CLAC82
Lemo Usa
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
T4111411051-000
TE Connectivity's T4111411051-000 is a threaded circular connector with EMI shielding, rated for 60V and 4A signal current. With brass shell material and nickel finish, it has 5 contacts, suitable for applications requiring durability up to 100 cycles in temperatures ranging from -40°C to 85°C.
805-001-16ZNU13-31PA
Glenair
Other Circular Connectors;
HDP24-18-6PN
TE Connectivity's HDP24-18-6PN is a circular connector with 6 contacts, rated at 250V and 100A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized male connector with solid backshell, such as panel mounting in high current environments.
SLPPA25BSB1
Amphenol's SLPPA25BSB1 is a circular connector with SNAP coupling, suitable for temperatures ranging from -40 to 125°C. Featuring a solid backshell and environment-resistant design, it is ideal for cable mounting applications requiring male busbar termination. UL certified, this plug-style connector offers reliable connectivity in various industrial settings.
HR10A-10P-10S(73)
Hirose Electric
HR10A-10P-10S(73) by Hirose Electric is a circular connector with 10 contacts, silver contact finish, and snap coupling type. It is used for cable mounting applications requiring a female plug with solid backshell and nickel-plated zinc alloy/brass shell material.
120091-0007
Molex 120091-0007 is a threaded circular connector with polyamide insulator, 4 female contacts. It is used for cable mounting applications in various industries.
HD36-24-31ST-072
TE Connectivity's HD36-24-31ST-072 circular connector features 31 contacts, rated at 13A and 250V. With a body size of 2.57" x 1.942" x 1.942", it is ideal for applications requiring a polarized, aluminum alloy plug with strain relief mounting for secure cable connections in environments ranging from -55°C to 125°C.
FGS.2M.319.XLMT
788153-2
TE Connectivity 788153-2 is a threaded circular connector with 600V rated voltage. Made of polyamide66, it operates b/w -55 to 105°C. Ideal for immersion-resistant applications, this male plug has 4 contacts and is UL certified.
SLPPB35BSB4EH
The Amphenol SLPPB35BSB4EH circular connector features a body depth of 1.142", SNAP coupling type, and operating temperatures from -40°C to 125°C. Ideal for applications requiring an environment-resistant solid backshell, this UL-certified male plug connector is designed for cable mounting with crimp termination.
PAA.M1.0SL.AC39GZ
HDP24-24-21PE-L015
TE Connectivity's HDP24-24-21PE-L015 is a circular connector with 21 contacts, rated at 250V and 25A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and solid backshell mounting on panels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDP26-24-23SN-L017
TE Connectivity's HDP26-24-23SN-L017 is a circular connector with 23 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized plug with strain relief mounting on cables.
HDP24-24-31PE-L015
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 13 A; EMI Shielded: NO;
HDP24-24-31PE-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.802 inch; Empty Shell: YES;
HDP24-24-31SE-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Minimum Operating Temperature: -55 Cel;
HDP24-24-31PE
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 13 A; Backshell Type: SOLID;
HDP24-24-31PT-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125; Contact Style: RND PIN-SKT;
HDP24-24-31PT
TE Connectivity's HDP24-24-31PT is a circular connector with 31 contacts, rated at 250V and 13A. Featuring a snap coupling type, GLASS FILLED POLYAMIDE insulator material, and UL flammability code of 94V-0, it is ideal for applications requiring a polarized male connector with solid backshell for panel mounting in temperatures ranging from -55 to 125°C.
HDP24-24-31SE
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 1.648 inch; Mixed Contacts: NO;
HDP24-24-31PT-L015
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-2: W/STRAIN RELIEF; Body Depth: 1.875 inch;
HDP26-24-31SE-L017
TE Connectivity's HDP26-24-31SE-L017 circular connector features a 1.675" x 1.95" body with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C temperature range. With UL certification, it has 31 contacts, a 13A signal current rating, and is ideal for cable mounting applications requiring a polarized female plug with strain relief backshell.
HDP24-24-31ST
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; EMI Shielded: NO;
HDP24-24-47PE-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: RND PIN-SKT; Mixed Contacts: NO;
HDP26-24-23SN-L015
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-2: W/STRAIN RELIEF; Reference Standard: UL;
HDP26-24-23SN
TE Connectivity's HDP26-24-23SN is a circular connector with 23 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and strain relief mounting on cables.
HDP24-24-31SE-L015
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 2.31 inch; Empty Shell: YES;
HDP26-24-31PE-L017
TE Connectivity's HDP26-24-31PE-L017 is a circular connector with 31 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male plug with strain relief mounting on cables.
HDP24-24-35PE-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; Filter Feature: NO;
HDP24-24-29PE-L017
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; Contact Style: RND PIN-SKT;
HDP26-24-21SE-L017
TE Connectivity's HDP26-24-21SE-L017 is a circular connector with 21 contacts, rated at 250V and 25A. Made of glass-filled polyamide, it operates b/w -55°C to 125°C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell for cable mounting.
HDP26-18-6SN-C030
TE Connectivity's HDP26-18-6SN-C030 is a circular connector with 6 contacts, rated for 100A signal current at 250V. Its glass-filled polyamide insulator withstands -55 to 125°C temperatures. Ideal for applications requiring a polarized, UL-rated connector with strain relief mounting on cables.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved