Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Function: SPST-NO; Coil or Input Supply Type: DC; Coil Resistance: 40 ohm; Relay Form: 1 FORM X;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Power & Signal Relays EV200H2ANA attributes and parameters. Explore more Power & Signal Relays devices from TE Connectivity
Relay Type:
Relay Function:
Relay Form:
Coil/Input Supply Type:
Contact Maximum AC Current:
Contact Maximum DC Current:
Coil Resistance:
Coil Maximum DC Voltage:
Mounting Type:
Contact End Material:
Termination Type:
EV200H2ANA Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
Changzhou Starsea Electronics
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Semiconductors
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KUP-14A15-120
TE Connectivity's KUP-14A15-120 is a 3PDT power/signal relay with 3 FORM C configuration. With AC coil operate voltage of 102V, it has an operate time of 15ms and electrical life of 10,000 cycles. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
V23134A1052C643
TE Connectivity's V23134A1052C643 is a 1 FORM C SPDT power/signal relay with 12V nominal coil voltage. It features a max AC contact current of 60A@12VDC and coil resistance of 90 ohm. Ideal for panel mounting applications requiring momentary relay action.
CB1A-P-24V
Panasonic
Panasonic's CB1A-P-24V is a SPST power/signal relay with 15ms operate/release time. It has a max contact rating of 1A@24VDC, making it ideal for DC applications. With compact dimensions of 26mm x 22mm x 25mm and solder termination, it is suitable for panel mounting in various electronic devices.
M39016/13-057L
TE Connectivity's M39016/13-057L is a DPDT-CO power/signal relay with 2 FORM C configuration. With operate time of 6ms, it has electrical life of 50k cycles and insulation resistance of 10G ohm. Ideal for applications requiring hermetically sealed, momentary action relays with gold plating on end contacts.
JS-24N-K
Fujitsu Component
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: BSI; CQC; CSA; DEMCO; FIMKO; NEMCO; OVE; SEMKO; SEV; UL; VDE;
6-1393243-8
TE Connectivity's 6-1393243-8 is a DPDT power/signal relay with 2 FORM C configuration. With an operate time of 8ms, it has a max AC contact current of 8A@400VAC and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring momentary relay action in various industries.
TQ2SA-L2-12V
Panasonic TQ2SA-L2-12V is a DPDT latched relay with 4ms operate/release time, suitable for power/signal applications. It has 100000 cycles electrical life, operates at -40 to 70°C, and supports max AC/DC contact current of 2A@125VAC. Ideal for AC/DC supply types with solder termination and surface mount-straight mounting feature.
3-1393236-0
Tyco Electronics Cii
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: UL; VDE;
1937650-5
TE Connectivity 1937650-5 is a SPST relay with 1 FORM A, suitable for AC applications up to 16A@250VAC. With coil resistance of 220 ohm and max DC coil voltage of 12V, it offers reliable performance in power & signal relay applications. Featuring compact dimensions of 29.11mm x 12.7mm x 16mm and weighing only 11g, it is ideal for panel mount installations.
EC2-24NU
Em Devices
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL;
LZ-12H-K-UC
Fujitsu
Fujitsu LZ-12H-K-UC is a 1 FORM C SPDT power/signal relay with 7ms operate time and 100000 cycle electrical life. It has a max contact DC power rating of 120W@150VDC, making it suitable for applications requiring momentary relay action in AC/DC circuits up to 250VAC/150VDC.
1416010-1
TE Connectivity 1416010-1 is a SPST power/signal relay with 25ms operate time and 50000 cycles electrical life. With IP67 sealing, it's ideal for applications requiring momentary relay action in harsh environments. Max AC contact current: 180A@12VAC.
CB1F-P-12V
CB1F-P-12V by Panasonic is a power and signal relay with SPDT function. It has an operate time of 15 ms and an electrical life of 100,000 cycles. This relay is suitable for applications requiring momentary relay action and can handle a max contact DC rating of 1A@12VDC.
LZ-12HMSE
Fujitsu LZ-12HMSE is a SPST power/signal relay with 7ms operate time and 100000 cycles electrical life. It has a max AC contact current of 5A@250VAC, making it suitable for applications requiring momentary relay action in various industries.
T92S11D12-48
Tyco Electronics Elcon
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL; VDE;
G6S-2DC24
Omron
Omron G6S-2DC24 is a DPDT relay with 2 FORM C form, operate time of 4.5ms, and electrical life of 100000 cycles. It has a max contact DC power rating of 60W@220VDC. Ideal for applications requiring momentary relay action in power & signal systems.
ADJ54024
ADJ54024 by Panasonic is a DPDT power/signal relay with 2 FORM C configuration. It has an operate time of 10ms and electrical life of 100,000 cycles. With a sealed body design, it's ideal for applications requiring reliable switching in industrial settings.
TQ2SA-24V
Panasonic TQ2SA-24V is a DPDT relay with 2 FORM C configuration. It operates at 24V, has 10 terminals, and offers a max contact DC power rating of 60W@220VDC. With a compact size of 14mm x 9mm x 5.4mm, it is ideal for power and signal relay applications requiring high electrical life and low coil power consumption.
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
T9AS1D12-12
TE Connectivity's T9AS1D12-12 is a SPST-NO power/signal relay with 15ms operate time and 100000 cycle electrical life. With 30A max AC contact current, it's ideal for applications requiring momentary relay action in sealed environments. Operating b/w 70°C to 85°C, this relay offers high insulation resistance of 1Gohm and dielectric strength up to 2500Vrms.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved