Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; Panel Mount: NO; Polarization Key: POLARIZED;
Median Price
$43.248
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$20.567
-
Digiode
$30.590
Vyrian
$32.200
VNN
Netroflash
$20.156
Corphita
$28.980
Rack & Panel Connectors BACC65BVMN attributes and parameters. Explore more Rack & Panel Connectors devices from TE Connectivity
Body or Shell Style:
Connector Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization:
Polarization Key:
Rated Voltage:
Shell Material:
Total No. of Contacts:
BACC65BVMN Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDLL4148
National Semiconductor
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Itt Semiconductor
1651450000
Weidmueller & Kg
1651450000 by Weidmueller & Kg is a Rack & Panel Connector with GOLD contact finish, GLASS FILLED POLYCARBONATE insulator, and 16 contacts. It is a RACK AND PANEL CONNECTOR for cable/panel mounting with UL 94V-0 flammability rating. Ideal for applications requiring reliable male crimp connectors in electronic systems.
GAP26MDS600000
Positronic Industries
RACK AND PANEL CONNECTOR; Manufacturer Series: GAP;
1679524
Phoenix Contact
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; IEC Conformity: NO; MIL Conformity: NO;
SMS2P-1
Souriau
RACK AND PANEL CONNECTOR; Contact Gender: MALE; UL Flammability Code: 94V-2; Insulator Material: POLYAMIDE; Filter Feature: NO; Mounting Type: CABLE;
SMS9P-1
RACK AND PANEL CONNECTOR; Contact Gender: MALE; Empty Shell: NO; UL Flammability Code: 94V-2; Additional Features: TRIM TRIO, POLARIZED; MIL Conformity: NO;
516-120-520-351
Edac
The Edac 516-120-520-351 is a multiway rack and panel connector with 120 contacts, gold over nickel termination finish, and hermaphroditic contact gender. It has a body length of 2.75", width of 1.525", and depth of 0.798". Ideal for board and panel mounting applications with an operating temperature range from -40°C to 125°C.
202800-2
TE Connectivity
TE Connectivity's 202800-2 Rack & Panel Connector has dimensions of 1.115" x 1.826" x 2.75". With a rated voltage of 250V and insulator material GLASS FILLED PHENOLIC, it operates b/w -55°C to 150°C. This connector features UL Flammability Code 94V-0 and is ideal for applications requiring a female crimp termination with a total of 160 contacts.
SMS3R-1
Esterline Technologies
RACK AND PANEL CONNECTOR; Contact Gender: FEMALE; Empty Shell: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE;
207153-1
Tyco Electronics Amp
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
5810118011
Cinch Connectivity Solutions
RACK AND PANEL CONNECTOR;
HC-D40-EBUC-R
DRC13-40PA
TE Connectivity's DRC13-40PA is a 4-row rack & panel connector with 1.39" length and 3.742" width, rated for 250V and 13A signal current. It features nickel termination finish, operates b/w -55°C to 125°C, UL certified with flammability rating of 94V-0. Ideal for applications requiring polarized male connectors in right-angle mounting on panels.
00175530502
Amphenol
Amphenol 00175530502 is a Rack & Panel Connector with 10 contacts. Features gold over nickel finish, polyethylene insulator, and copper alloy contact material. Ideal for cable and panel mounting applications requiring crimp termination.
HC-D25-ESTC-R
0611017
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Total No. of Contacts: 80; MIL Conformity: NO;
DMC-MD8001
TE Connectivity's DMC-MD8001 Rack & Panel Connector features EMI shielding, rated voltage of 125V, and operating temperatures from -65 to 175°C. With aluminum alloy shell and crimp termination, it is ideal for applications requiring polarization keying in EN/MIL standards.
MS26RM58S1
DMC-MD8901
TE Connectivity's DMC-MD8901 Rack & Panel Connector features a body size of 3.465" x 0.594" x 1.106", MIL conformity, and operating temperatures from -55°C to 175°C. Ideal for applications requiring EN/MIL standards compliance, aluminum alloy shell material, crimp termination, and plug-style body for cable and panel mounting with nickel finish.
110900-0008
Itt Cannon
110900-0008 by ITT Cannon is a Rack & Panel Connector with 60 contacts, Glass Filled Polyethylene insulator, and Crimp termination. It is used for cable mounting applications and mating with 086-0032-000 connectors.
DLM3-60P
DLM3-60P by ITT Cannon is a Rack & Panel Connector with 60 gold contacts. It features a GLASS FILLED POLYETHYLENE insulator and metal shell, suitable for panel mounting applications. With UL Flammability Code 94V-0, this male plug connector offers high reliability and durability in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BACC65BUMB
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; Rated Voltage: 125 V; Maximum Operating Temperature (Cel): 175;
BACC65BUME
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED;
BACC65CAMF
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 175; No. of Ports: 1; Mounting Option-2: LATCHING;
BACC65BUMF
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; IEC Conformity: NO; EMI Shielded: YES;
BACC65BVME
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; EMI Shielded: YES; No. of Ports: 1;
BACC65BVMF
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Option-2: LATCHING; Minimum Operating Temperature: -65 Cel; Polarization Key: POLARIZED;
BACC65BUMA
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Material: COMPOSITE; Empty Shell: YES; Polarization Key: POLARIZED;
BACC65BUMC
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; EMI Shielded: YES; Maximum Operating Temperature (Cel): 175;
BACC65BUMN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; DIN Conformance: NO; Minimum Operating Temperature: -65 Cel; Mixed Contacts: NO;
BACC65BVMB
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Operating Temperature: -65 Cel; Shell Material: COMPOSITE; Polarization Key: POLARIZED;
BACC65BVMC
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE; Mixed Contacts: NO; Rated Voltage: 125 V;
BACC65CP1PB
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.54; Total No. of Contacts: 3;
BACC65CP2PA
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mains Connector Rating: 5A; Termination Type: CRIMP;
BACC65CP2PD
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: CABLE; Polarization: D;
BACC65CP3PB
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO; IEC Conformity: NO;
BACC65CR1SB
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Polarization: B; Contact Design: PREASSEM CONN;
BACC65CR1SN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO; Polarization Key: POLARIZED;
BACC65CR2PA
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Sizes: 22; Mounting Type: CABLE;
BACC65CR2SN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Sizes: 22; Mounting Style: STRAIGHT;
BACC65CR3PN
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Rated Voltage: 500 V; Body or Shell Style: RECEPTACLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved