Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity ADF02S04 is a SPST slide DIP switch with 2 positions. It has a max DC contact current of 0.1A@24VDC and electrical life of 1000 cycles. Ideal for panel mount applications requiring a compact, latched switch with solder termination.
Median Price
$0.750
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Element14
1+ parts
$1.080
100+ parts
$0.796
1k+ parts
$0.745
10k+ parts
-
Mouser Electronics
$1.140
$0.837
$0.721
Chip1Stop
$0.942
$0.681
Farnell
$0.467
$0.371
$0.313
Arrow
$0.557
$0.519
Verical
Rapid Electronics
$0.988
ComSIT Distribution GmbH
ComSIT USA
Electro Sonic
$0.709
$0.564
$0.486
VNN
IBS Electronics
$1.175
$0.860
$0.805
TME
$0.538
Nova Conductors
EMSNET
Avant Electronics Limited
Assy Fe
Argo Parts USA
Continental Prestige Electronics
Metaverse IC Inc.
Netroflash
Perfect Parts
The white actuator color provides a clean and easy-to-read indicator for the switch position.
Polyphenylene sulphide offers high temperature resistance and excellent mechanical properties, making the switch durable and reliable.
Copper alloy terminals ensure good conductivity and long-term reliability of the switch.
With a high electrical life of 1000 cycles, this switch is long-lasting and suitable for frequent use.
The high insulation resistance of 100000000 ohms ensures proper isolation of electrical circuits for safe operation.
The compact and standard body width of 7.06 inches makes this switch suitable for various applications and installations.
Having 2 switch sections allows for independent control or setting options, adding versatility to the switch.
The single-pole, single-throw (SPST) switch function is commonly used and provides a simple on/off control.
Nickel plating on the end contacts offers corrosion resistance and ensures reliable electrical connections.
Polyphenylene sulphide insulator material provides excellent dielectric properties and thermal stability for safe operation.
The low profile body height of 3.5 mm makes this switch suitable for compact electronic devices and PCB mounting.
With a high maximum operating temperature of 85°C, this switch is suitable for use in various environmental conditions.
The maximum AC contact current rating of 1A allows for handling moderate electrical loads safely.
The low minimum operating temperature of -30°C ensures reliable operation even in cold conditions.
Copper alloy end contacts provide good conductivity and durability for reliable electrical connections.
Having 2 positions allows for binary control or selection options, adding flexibility to the switch.
The flush type actuator design provides a sleek and seamless appearance, ideal for modern electronic devices.
The maximum DC contact voltage of 24V allows for safe operation with various DC power sources.
The slide DIP switch design offers easy manual control and quick setting changes, ideal for user-friendly operations.
Gold plating on the center contacts offers high conductivity, corrosion resistance, and signal integrity for reliable performance.
The black body color provides a professional and aesthetic appearance for the switch, suitable for various applications.
With a dielectric withstand voltage of 300VAC, this switch can safely handle electrical insulation requirements.
The off-on contact function provides a simple and binary control option, suitable for basic switching applications.
The tube packing method ensures easy storage, handling, and installation of these switches in bulk quantities.
The compact body length/diameter of 7.06 mm allows for space-saving installations and compatibility with standard mounting options.
The maximum contact DC rating of 0.1A at 24VDC ensures safe and reliable operation with low DC power loads.
Copper alloy center contacts offer good conductivity and mechanical strength for reliable electrical connections.
The maximum DC contact current rating of 0.1A allows for safe operation with low DC power loads.
The latched switch action ensures that the selected position stays in place until manually changed, providing stability and control.
The solder termination type offers secure and durable connections for easy integration into electronic circuits.
With a low contact resistance of 100 mOhm, this switch ensures minimal power loss and reliable signal transmission.
The panel mounting feature allows for secure and stable installation of the switch on various panel surfaces.
Polyamide6T actuator material offers good mechanical properties, durability, and chemical resistance for reliable operation.
DIP & SIP Switches ADF02S04 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Insulation Resistance:
Contact Resistance:
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum AC Current:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
Additional Features:
ADF02S04 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
219-3MSTR
Cts
219-3MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 3 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a compact slide dip switch with high insulation resistance and wave solderability.
IKD0403000
Apem Components
The Apem Components IKD0403000 is a 4-section SPST slide DIP switch with gold-plated contacts. It has a reflow solderable polyethylene housing, 2000 cycles electrical life, and 100M ohm insulation resistance. Ideal for applications requiring OFF-ON contact function at temperatures ranging from -20 to 85°C.
BPA03SBR
C & K Components
BPA03SBR by C & K Components is a SPST slide DIP switch with 3 positions, gold over nickel plating, and brass terminals. It has an electrical life of 1000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a latched switch action in temperatures ranging from -20 to 85°C.
418121270804
Wuerth Elektronik & Kg
Wurth Elektronik 418121270804 is a slide DIP switch with SPST function, 4 positions, and raised actuator type. It has gold-plated contacts, polyamide housing, and copper alloy terminals. Ideal for applications requiring ON-OFF contact function in electronic devices operating b/w -40 to 85°C.
A6T-4104
Omron
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Electrical Life: 1000 Cycle(s); null: ON-OFF; Maximum Operating Temperature: 70 Cel; Insulation Resistance: 100000000 ohm;
A6TR-2104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 2; Minimum Operating Temperature: -20 Cel; Maximum DC Contact Voltage: 24 V; null: DPST;
BD02
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Body Height: 6.73 mm; Insulation Resistance: 1000000000 ohm; null: 2; End Contact Plating: GOLD OVER NICKEL;
5-1825059-3
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Electrical Life: 1000 Cycle(s); End Contact Plating: GOLD; null: LATCHED; Body Length/Diameter: 27.36 mm;
4-1571999-5
TE Connectivity
TE Connectivity's 4-1571999-5 is a PIANO DIP SWITCH with SPST function. It has 4 switch sections, GOLD OVER NICKEL plating, and POLYPHENYLENE SULPHIDE housing material. Ideal for PANEL MOUNT applications with max DC contact current of 1A at 5VDC.
1-1571999-6
TE Connectivity 1-1571999-6 is a SPST Piano DIP switch with 6 sections, 1000 cycles electrical life, and 100M ohm insulation resistance. It features white actuator color, polyphenylene sulphide housing material, and copper alloy terminals. Ideal for applications requiring reliable switching in temperatures ranging from -30 to 85°C.
76PSB05ST
Grayhill
Grayhill's 76PSB05ST is a PIANO DIP SWITCH with 5 sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring momentary switch action, it has a max DC contact voltage of 30V and operates b/w -40°C to 85°C.
219-2MSTJ
219-2MSTJ by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life, operates b/w -55 to 85 °C, and withstands up to 500VAC. Ideal for ON-OFF applications in electronics requiring a latched SLIDE DIP SWITCH design with SOLDER termination.
219-2LPSTJF
The Cts 219-2LPSTJF is a DIP & SIP switch with SPST function, gold plating, and polyethylene housing. It has an electrical life of 2000 cycles, insulation resistance of 1G ohm, and operates b/w -55 to 85°C. Ideal for applications requiring a latched slide dip switch with solder termination in surface mount configurations.
A6FR-4101
DIP Switches; null: PIANO DIP SWITCH;
CHS-04TB
Nidec Copal Electronics
CHS-04TB by Nidec Copal Electronics is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It has a max DC contact voltage of 6V, electrical life of 2000 cycles, and operates b/w -40°C to 85°C. Ideal for applications requiring reliable switching in harsh environments.
A6D-3100
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 0 inch; null: MAKE-BEFORE-BREAK; null: POLYPHENYLENE TEREPHTHALATE; Maximum DC Contact Current: .03 A;
MCNDS-04-V
Multicomp Pro
MCNDS-04-V by Multicomp Pro is a 4-section SPST slide DIP switch with gold plating, 2000 cycles electrical life, and 100M ohm insulation resistance. Ideal for ON-OFF applications in electronics, it operates b/w -40 to 85°C with a max DC rating of 0.025A@24VDC.
204-124STR
204-124STR by Cts is a SLIDE DIP SWITCH with 4 sections, SPDT function, and LATCHED action. It has a body size of 22.5x10.41x9.12 mm and operates b/w -40 to 85 °C. Ideal for applications requiring SOLDER termination, it offers 0.1A@50VDC max DC contact rating in TAPE AND REEL packing method.
78J01ST
Grayhill's 78J01ST is a SPDT slide DIP switch with 2000 cycles electrical life. It has a body width of 7.1" and sealing with top tape. With a max DC contact voltage of 30V, it is ideal for applications requiring latched switch action in temperatures ranging from -40°C to 85°C.
A6E-4104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; PCB Hole Count: 8; null: MAKE-BEFORE-BREAK; Sealing: BOTTOM SEALED; JESD-609 Code: e4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADF04STTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; null: GOLD; null: BLACK; null: POLYPHENYLENE SULPHIDE;
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TAPE SEALED; null: LATCHED; null: SPST; Packing Method: TAPE AND REEL;
ADF04ST
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; null: SLIDE DIP SWITCH; Sealing: TAPE SEALED; null: 4;
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: BLACK; null: REFLOW; Maximum Contact DC Rating (R Load): 0.1A@24VDC; Packing Method: TUBE;
ADF06ST04
DIP Switches; Mounting Feature: PANEL MOUNT; Packing Method: TR; Body Height: 3.5 mm; Maximum AC Contact Current: 1 A; Insulation Resistance: 100000000 ohm;
ADF02SB
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3.5 mm; Terminal Finish: TIN-LEAD; Insulation Resistance: 100000000 ohm; End Contact Plating: GOLD;
ADF02SBT
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; End Contact Material: COPPER ALLOY; Termination Type: SOLDER; Additional Features: APPROVAL: UL; null: FLUSH TYPE;
ADF02SATTR04
DIP Switches; Mounting Feature: PANEL MOUNT; null: WHITE; null: SPST; End Contact Material: COPPER ALLOY; null: GOLD;
ADF02SA04
DIP Switches; Mounting Feature: PANEL MOUNT; null: POLYPHENYLENE SULPHIDE; Body Length/Diameter: 7.06 mm; Contact Resistance: 100 mohm; Minimum Operating Temperature: -30 Cel;
ADF02T04
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Minimum Operating Temperature: -30 Cel; Sealing: TAPE SEALED; Termination Type: WIRE; null: GOLD OVER NICKEL;
ADF02SAT04
DIP Switches; Mounting Feature: PANEL MOUNT; null: OFF-ON; null: SPST; null: COPPER ALLOY; Packing Method: TR;
ADF02ST04
DIP Switches; Mounting Feature: PANEL MOUNT; null: 2; End Contact Material: COPPER ALLOY; null: WHITE; null: GOLD;
ADF02SATTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3.5 mm; null: LATCHED; null: SPST; Additional Features: APPROVAL: UL;
ADF02SAT
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Additional Features: APPROVAL: UL; Body Length/Diameter: 7.5 mm; Maximum Contact DC Rating (R Load): 0.1A@24VDC; Minimum Operating Temperature: -30 Cel;
ADF02SA
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Contact Resistance: 100 mohm; Packing Method: TUBE; Termination Type: SOLDER; null: COPPER ALLOY;
ADF02STTR
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Contact Resistance: 100 mohm; null: FLUSH TYPE; null: 300VAC; Body Height: 3.5 mm;
ADF02ST
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: POLYAMIDE6T; Minimum Operating Temperature: -30 Cel; Packing Method: TUBE; null: LATCHED;
ADF02S
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: BLACK; null: COPPER ALLOY; Termination Type: SOLDER; null: GOLD;
ADF02
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: OFF-ON; Maximum DC Contact Voltage: 24 V; Insulation Resistance: 100000000 ohm; PCB Hole Count: 4;
ADF02STTR04
DIP Switches; Mounting Feature: PANEL MOUNT; Packing Method: TR; null: FLUSH TYPE; Body Length/Diameter: 7.06 mm; Maximum DC Contact Current: .1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved