Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 6116201-1 is a Telecom & Datacom Connector with 0.63"x.61"x.65" dimensions, POLYETHYLENE insulator, and COMPLIANT BOARDLOCK mounting. It has 8 contacts, rated at 1.5A for signal current, UL94V-0 flammability code, and operates b/w -40°C to 85°C. Ideal for telecom and datacom applications requiring durable connectors with press-fit termination and polarized housing.
Median Price
$3.557
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Master Electronics
1+ parts
$2.332
100+ parts
$2.120
1k+ parts
$1.990
10k+ parts
$1.630
Element14
-
$2.445
$2.158
Mouser Electronics
$3.700
$3.110
$2.800
$2.430
Arrow
$3.711
$2.715
$2.418
$2.104
TE Connectivity
$3.840
$3.400
$3.100
DigiKey
$4.450
$3.292
$2.856
$2.557
Verical
Chip1Stop
$2.490
$1.970
$1.820
Powell Electronics
$3.290
$2.670
Digiode
$2.432
Electro Sonic
$2.640
$2.400
$2.290
$2.060
Vyrian
Component Sense
Rapid Electronics
$1.909
TME
Connect4Technologies Inc.
VNN
Semi Source
Nova Conductors
Bristol Electronics
IBS Electronics
$4.047
$3.046
$2.820
Semicontronic
$1.921
$1.911
Corphita
$2.304
Aztec Data Supply Inc.
$2.882
Continental Prestige Electronics
$3.440
$2.590
Bastille Electronics
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Compact size makes it suitable for space-constrained applications.
Provides good electrical insulation and resistance to heat.
Can withstand high temperatures, ensuring reliability in various environments.
Specifically designed for telecom and datacom applications, ensuring compatibility and performance.
Can withstand repeated connections and disconnections, increasing product lifespan.
Easy and secure method for terminating wires, simplifying installation.
Allows for straightforward installation on boards or panels.
Designed for telecom applications, ensuring signal integrity and reliability.
Optimal length for secure wire connections.
Meets commercial standards for reliability and performance.
Telecom & Datacom Connectors 6116201-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
6116201-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Meritek Electronics
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
LM358N
NXP Semiconductors
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
General Semiconductor
67068-8001
Molex
Molex 67068-8001 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications with 1000000000 ohm insulation resistance, 750VAC dielectric voltage, and 1500 cycle durability. Operating temperature range from 0 to 50 °C.
10168-6000EC
3m Electronic Products Division
10168-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features GOLD OVER NICKEL Termination Contact Finish and GLASS FILLED POLYESTER Insulator Material.
12401610E4#2A
Amphenol
The Amphenol 12401610E4#2A is a telecom & datacom connector with dimensions of 0.361" x 0.129" x 0.413". It features 24 contacts, rated for 5A signal current, UL94V-0 flammability. This female USB connector has a right-angle mounting style and surface mount termination, suitable for board applications.
43743-8101
Molex 43743-8101 is a Telecom & Datacom Connector with 0.6"x.462"x.724" dimensions, 500000000 ohm Insulation Resistance, and 1000VAC Dielectric Withstanding Voltage. Ideal for board mounting with solder holding posts, this female jack connector has 8 contacts, operates b/w -40 to 80°C, and offers durability of up to 500 cycles in commercial applications.
USB4110-GF-A
Global Connector Technology
USB4110-GF-A by Global Connector Technology is a USB connector with 16 contacts, matte tin finish, and polyethylene insulator. It has a dielectric voltage of 100VAC and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination type.
54819-1572
54819-1572 by Molex is a USB connector with 5 contacts, 0.39" body length, and 0.156" body width. It features liquid crystal polymer insulation material and tin termination finish. Ideal for telecom/datacom applications, it offers 5000 cycle durability and operates b/w 0-50°C temperature range.
3-216444-1
TE Connectivity 3-216444-1 is a Telecom & Datacom Connector with POLYAMIDE insulator. It has 4 contacts, rated at 1.5A for signal current. Operating temperature range from -40 to 70°C makes it suitable for various applications in telecom and datacom industries.
HDRA-E68LFDT-SLC
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Mounting Style: RIGHT ANGLE;
09451511560XL
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
USB4105-GF-A-120
USB4105-GF-A-120 by Global Connector Technology is a USB connector with 24 contacts, rated at 5A signal current. It features liquid crystal polymer insulation material, matte tin over nickel finish, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring durable connectors with right-angle mounting options.
RJHSE-5384-02
Amphenol RJHSE-5384-02, a Telecom & Datacom Connector with 8 contacts, features Matte Tin finish, Polyethylene insulator, and Phosphor Bronze contact material. It offers high insulation resistance of 500M ohm and withstands up to 1000VAC. Ideal for board and panel mounting in telecom applications with durability of 750 cycles.
692121430000
Wuerth Elektronik & Kg
692121430000 by Wurth Elektronik is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, rated for 100VAC. Featuring Tin (Sn) termination finish, it has 9 contacts and operates b/w -20 to 85°C. Ideal for board mounting applications in telecom and datacom systems, offering durability of 5000 cycles.
292303-7
TE Connectivity's 292303-7 is a telecom and datacom connector with a max operating temperature of 85°C and a min operating temperature of -55°C. It has a shell material made of copper alloy, with a tin finish and solderable retention clips for board mounting. This connector is commonly used in telecommunications and data communication applications.
5555153-1
TE Connectivity 5555153-1 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and 500M ohm insulation resistance. Ideal for board mounting with split board lock option, it operates b/w -40 to 85°C and has UL 94V-0 flammability rating.
1734100-4
TE Connectivity's 1734100-4 is a Telecom & Datacom Connector with 40 contacts, 1A signal rating, and 600 cycle durability. Featuring a mating contact pitch of 0.05", it uses Matte Tin finish contacts for applications requiring high insulation resistance and UL94V-0 flammability compliance.
10136-6000EC
10136-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
J3011G21DNLT
Pulse Electronics
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2171800001
TELECOM AND DATACOM CONNECTOR;
5555167-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
ZX80-B-5SA(30)
Hirose Electric
ZX80-B-5SA(30) by Hirose Electric is a USB connector with 5 contacts, gold termination finish, and liquid crystal polymer insulator. It is used in telecom/datacom applications for board mounting, featuring a stainless steel shell and surface mount termination. The connector has UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6116075-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Ports: 1; Mounting Option-1: LOCKING; IEC Conformity: NO;
TE Connectivity 6116075-1 is a telecom & datacom connector with EMI shielding, UL94V-0 flammability rating, and 8 contacts. It has a right-angle mounting style, solder termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring durable connectors with polarized housing and locking mounting option.
6116526-1
TE Connectivity 6116526-1 is a Telecom & Datacom Connector with 0.625" body length, EMI shielding, and 500M ohm insulation resistance. Ideal for board mounting with POLYAMIDE insulator material, it operates b/w -40 to 85°C.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Board Mounting Option: PEG; IEC Conformity: NO;
6116522-1
TE Connectivity 6116522-1 is a Telecom & Datacom Connector with EMI shielding, 8 contacts, and insulation resistance of 500M ohm. It has a body length of 1.31", suitable for panel mounting applications in telecom and datacom equipment. The connector features a right-angle mounting style and solder termination, ensuring durability with 750 cycles lifespan.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: PHOSPHOR BRONZE; Total No. of Contacts: 16; Insulator Material: POLYETHYLENE;
6116202-1
Adam Tech
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 900VAC; Mating Contact Finish: AU ON NI; Minimum Operating Temperature: -40 Cel;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Material: COPPER-ZINC ALLOY;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Terminal Pitch (mm): 2.54; Termination Contact Finish: MATTE TIN OVER NICKEL;
6116418-1
6116173-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .68 inch; Shell Material: COPPER-ZINC ALLOY; DIN Conformance: NO;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Durability: 750 Cycles;
6116173-1
TE Connectivity 6116173-1 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, rated at 1.5A for signal current. The connector features a right-angle mounting style and solder termination, suitable for telecom and datacom applications.
6116317-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
6116075-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 8;
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Termination Contact Finish: TIN LEAD OVER NICKEL; Body or Shell Style: JACK;
6116353-1
TE Connectivity 6116353-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, insulation resistance of 500MΩ, and operates b/w -40 to 85°C. Ideal for telecom applications due to its durability, right-angle mounting style, and solder termination.
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Shell Material: COPPER-ZINC ALLOY; DIN Conformance: NO;
6116202-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -40 Cel; Body Depth: .655 inch;
6116202-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Plating Thickness (inch): 50u; Termination Type: PRESS FIT; Terminal Pitch (mm): 1.02;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved