Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 11.35mm x 9.5mm x 7.05mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 6-1879325-6 attributes and parameters. Explore more Variable Resistors devices from TE Connectivity
Orientation (Actuator):
Dimensions:
Resistor Type:
6-1879325-6 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
FDLL4148
Fairchild Semiconductor
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
RK27112A00AK
Alps Alpine
Alps Alpine RK27112A00AK is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It has a shaft actuator, through-hole mounting, and PCB package style. Ideal for applications requiring precise voltage or current control in electronic circuits.
PT6KV-473A2020
Amphenol
Amphenol's PT6KV-473A2020 is a 47000 ohm linear trimmer resistor with 3 terminals. It has a rated power dissipation of 0.1 W and operates at temperatures from -25 to 70 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Y0056500R000K0L
Vishay Intertechnology
Vishay Intertechnology's Y0056500R000K0L is a rectangular package variable resistor with a resistance of 500 ohm. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This potentiometer is commonly used in PCB mount applications for precise resistance adjustment.
D25K400E
Ohmite Manufacturing
The Ohmite D25K400E is a 400 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 25W and can operate at temperatures up to 350°C. Ideal for chassis mount applications requiring precise voltage control in high-temperature environments.
PVZ3A104A01R00
Murata Manufacturing
Murata Manufacturing's PVZ3A104A01R00 is a linear trimmer resistor with 100k ohm resistance, 30% tolerance, and 0.1W power dissipation. It features a vertical actuator orientation, rectangular package shape, and gold terminal finish. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments.
P0915N-FC15AR50K
Tt Electronics Plc P0915N-FC15AR50K is a 50000 ohm potentiometer with conductive plastic technology. It has a rectangular package, 3 terminals, and operates b/w -10 to 70 °C. Ideal for audio applications, this PCB mount resistor features a shaft actuator and 20% tolerance for precise control in panel mounting setups.
3296Y-1-202LF
Bourns
Bourns 3296Y-1-202LF is a multi-turn cermet trimmer resistor with 2000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
RV4LAYSA102A
Precision Electronics
POTENTIOMETER; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Reference Standard: MIL-R-94;
RS45111A900F
Alps Alpine RS45111A900F is a linear potentiometer with 10000 ohm resistance, 3 terminals, and 20% tolerance. It has a slide adjust construction, operates at 10V voltage, and dissipates 0.25W power. Ideal for PCB mounting applications in temperature range of -25 to 70 °C.
89PHR50KLF
89PHR50KLF by Tt Electronics Plc is a TRIMMER variable resistor with a resistance of 50000 ohm and rated power dissipation of 0.75 W. It has a linear law of resistance, operates b/w -55 to 125 °C, and is suitable for PCB mount applications requiring precise resistance adjustments.
3856H282103A
Bourns 3856H282103A is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 2 W power dissipation. Ideal for chassis mount applications, it offers a wide temperature range from -65 to 125 °C and a rotation angle of 250°.
3306K-1-503
Bourns 3306K-1-503 is a CERMET trimmer resistor with 50k ohm resistance, 25% tolerance, and 0.2W power dissipation. It operates b/w -25°C to 100°C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The linear law of resistance and screw actuator make it ideal for fine-tuning circuits with a wide operating voltage range up to 100V.
3362P-1-501LF
Bourns 3362P-1-501LF is a CERMET variable resistor with 500 ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a max operating temperature of 125°C and min of -55°C. Its screw actuator allows for a rotation angle of 240° in through-hole mounting setups.
3299P-1-101LF
Bourns 3299P-1-101LF is a CERMET trimmer pot with 100 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in electronic circuits.
RK16312101A2
Alps Alpine RK16312101A2 is a linear rotary potentiometer with 10000 ohm resistance, 6 terminals, and 300° rotation angle. It is used in PCB mount applications for voltage control with a rated power dissipation of 0.1 W.
T93XA502KT20
Vishay Intertechnology's T93XA502KT20 is a 5000 ohm linear trimmer resistor with 21 turns, rated for temperatures b/w -55 to 125 °C. It features a CERMET technology in a rectangular package suitable for PCB mounting applications. With an operating voltage of 50 V and power dissipation of 0.5 W, it offers precise resistance adjustment in various electronic circuits.
3862C-206-103AL
Bourns 3862C-206-103AL is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for applications requiring precise resistance adjustment in electronic circuits.
3310C-001-104L
Bourns 3310C-001-104L is a linear potentiometer with resistance of 100k ohm, rated power of 0.25W, and temperature coefficient of 1000 ppm/°C. It is used in PCB mount applications for precise control in devices requiring a 270° rotation angle.
3296W-1-202LF
The Bourns 3296W-1-202LF is a multi-turn variable resistor with a resistance of 2000 ohm and a tolerance of 10%. It is commonly used in applications requiring precise voltage control, such as audio equipment and industrial automation systems.
PS60-10MC1BR5K
PS60-10MC1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. It is designed for PCB mounting applications requiring a vertical slide actuator in through-hole mount construction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TE Connectivity
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved