Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 5748678-2 BACKSHELL features Shell Size 2, ABS material, and supports up to 0 AWG wire. Ideal for applications requiring #4-40 or screw mounting options in Assembly Products category.
Median Price
$9.170
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
RS Americas
1+ parts
$2.700
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$4.281
$3.602
$3.387
Arrow
$6.501
$5.371
Verical
$7.040
$6.770
$5.010
Newark
$8.510
$6.960
TE Connectivity
$9.870
$8.740
$7.980
Element14
$10.970
Farnell
$13.630
$9.040
Powell Electronics
$24.582
$10.589
$9.265
PEI Genesis
Chip1Stop
$7.600
$5.260
DigiKey
$19.810
$19.030
Component Electronics Inc.
$7.690
$5.770
$5.000
Vyrian
VNN
Nova Conductors
Rapid Electronics
TME
IBS Electronics
$6.775
$6.525
Electro Sonic
$7.440
$4.100
$3.590
American Connector Supply Corp
Van Brakel Electronic
Semi Source
Semicontronic
$2.290
$2.233
$2.221
Aztec Data Supply Inc.
$7.071
Continental Prestige Electronics
$8.470
$6.480
Argo Parts USA
Glotronic Ltd.
Perfect Parts
Bastille Electronics
Assy Fe
Having two shell sizes allows for flexibility in connecting different wire sizes or configurations, making this product versatile for various applications.
The backshell design provides added protection and strain relief for the wires or cables, ensuring a secure and reliable connection.
Supporting up to 0 AWG wire size indicates that this product can handle high power applications or larger wire gauges with ease.
ABS material offers excellent durability and resistance to impact, making the product suitable for demanding environments or conditions.
The screw mounting option provides a secure and stable attachment method, ensuring the backshell stays in place during use.
Compatibility with #4-40 screws allows for easy installation and removal, making maintenance or modifications hassle-free.
Assembly Products 5748678-2 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Shell Sizes:
Shielding:
Wire Gauge (AWG):
Maximum Wire Size:
PCN Obsolescence/ EOL - Mult Devs - Parts are active 17/DEC/2021
PCN Assembly/Origin - Mult Devs - Mfg Location Chg 23/APR/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
1554216004
Molex
WIRE AND CABLE;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BXH-001T-P0.6
J S T Mfg
BXH-001T-P0.6 by J S T Mfg is a CRIMP terminal with approvals from TUV and UL, rated for 250V AC/DC and 3A current. It has a max operating temperature of 85°C and min of -25°C, suitable for applications requiring FEMALE contacts with 22 AWG wire size in STRAIGHT mounting style with LOCKING option.
1766245-1
TE Connectivity's 1766245-1 is a male power contact with solder terminal type, rated for 35A current. Made of brass, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting with wire sizes up to 0 AWG.
SPH-004T-P0.5S
SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.
TXR40SJ00-1810AI
TE Connectivity's TXR40SJ00-1810AI is an Assembly Product with 0.313" min cable entry, 0.5" max cable entry, and 0 AWG max wire size. It operates b/w -65°C to 260°C, making it ideal for high temperature applications in various industries.
AWP-4S
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: WEDGE LOCK; Usage: ATP06; DIN Conformity: NO; Material: POLYETHYLENE;
3030161
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
5-66506-9
Tyco Electronics Amp
5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.
3030527
CONNECTOR ACCESSORY;
ZE05-2022SCF
Hirose Electric
1729532201
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
D38999/33Z19R
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: METAL; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -65 Cel; Shell Sizes: 19;
030-1953-000
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Rated Current: 5 A; Rated AC Voltage: 1000 V; Approvals (V): UL; Minimum Wire Size: 24 AWG; Design: SIGNAL;
1-66101-9
TE Connectivity's 1-66101-9 is a crimp terminal contact designed for CPC/G Series/M Series connectors. With a finish thickness of 100, it can handle wire gauges ranging from 16 AWG to 18 AWG and has a rated current of 13 A. This connector accessory is made of brass and is suitable for power and signal applications.
56134-9100
Molex 56134-9100 CONTACT features CRIMP terminal type, 0.0354" min cable entry, and COPPER ALLOY material. Ideal for 51242, 51382, 51353 SERIES applications requiring FEMALE contact gender and SQUARE PIN-SOCKET style. Supports wire sizes from 28 AWG to 22 AWG with 0.067" max cable entry.
SZE-002T-P0.3
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
35053-9002
Molex 35053-9002 contact features crimp terminal type, straight contact design, and brass material. It is used for signal applications with wire sizes ranging from 28 AWG to 22 AWG. The male contact has a rated current of 3 A and contact resistance of 20 mohm.
DF13-2630SCFA(05)
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5748676-1
TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.
5748676-2
TE Connectivity 5748676-2 is a backshell with 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max temp of 105°C. Features zinc alloy material, #4-40 screw mounting options, and supports up to 0 AWG wire size.
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
5748677-1
CONNECTOR ACCESSORY; Shielding: YES; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Cable Entry: .32 inch; Mounting Option-1: #4-40;
5748676-4
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Material: ZINC ALLOY; Minimum Cable Entry: .255 inch; Additional Features: ROHS COMPLIANT, SHIELDED;
5748676-5
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; Maximum Cable Entry: .47 inch; Additional Features: ROHS COMPLIANT, SHIELDED; Material: ZINC ALLOY;
5748678-1
CONNECTOR ACCESSORY; Shielding: NO; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Material: ACRYLONITRILE BUTADIENE STYRENE;
5748678-3
CONNECTOR ACCESSORY; Shielding: NO; DIN Conformity: NO; Mounting Option-1: #4-40; Maximum Wire Size: 0 AWG; Additional Features: UNSHIELDED;
5748677-5
CONNECTOR ACCESSORY; Shielding: YES; Maximum Cable Entry: .47 inch; IEC Conformity: NO; Maximum Wire Size: 0 AWG; Mounting Option-2: SCREW;
5748271-3
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-FEMALE SCREWLOCK; DIN Conformity: NO; Wire Gauge (AWG): 0;
5748678-5
CONNECTOR ACCESSORY; Shielding: NO; Wire Gauge (AWG): 0; Shell Sizes: 5; Assembly Item Name: BACKSHELL; Maximum Wire Size: 0 AWG;
5748677-4
CONNECTOR ACCESSORY; Shielding: YES; Minimum Cable Entry: .255 inch; Mounting Option-2: SCREW; DIN Conformity: NO; Material: POLYETHYLENE;
5748677-2
TE Connectivity's 5748677-2 backshell features 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max operating temp of 85°C. Supports up to 0 AWG wire size and mounts via #4-40 screws.
5748677-3
CONNECTOR ACCESSORY; Shielding: YES; MIL Conformity: NO; Maximum Operating Temperature: 85 Cel; DIN Conformity: NO; Shell Sizes: 3;
5748270-2
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: METAL SHELL OR ALL PLASTIC CONNECTORS; IEC Conformity: NO; Material: STEEL; Wire Gauge (AWG): 0;
5748558-3
CONNECTOR ACCESSORY; Material: STEEL; Assembly Item Name: SCREW ITEM; Maximum Wire Size: 0 AWG; DIN Conformity: NO; IEC Conformity: NO;
5748558-4
CONNECTOR ACCESSORY; Assembly Item Name: HARDWARE-FEMALE SCREWLOCK; Additional Features: BULK; Mounting Option-2: SCREW; IEC Conformity: NO; Material: STEEL;
5748678-4
CONNECTOR ACCESSORY; Shielding: NO; Assembly Item Name: BACKSHELL; Shell Sizes: 4; Additional Features: UNSHIELDED; Maximum Wire Size: 0 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved