Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 5-146257-6 is a 2-row board connector with matte tin finish, suitable for applications requiring a rated current of 3A. With polyethylene insulator and UL94V-0 flammability rating, it has 12 contacts spaced at 0.1" for easy mounting on boards. Operating b/w -65 to +105°C, it meets CSA, LR, U standards.
Median Price
$2.525
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.350
100+ parts
$1.185
1k+ parts
$1.070
10k+ parts
-
Verical
$1.820
$1.720
Element14
$2.291
$1.836
TE Connectivity
$2.510
$2.310
$2.160
$2.060
Farnell
$2.540
$2.070
$1.680
$1.560
Arrow
$2.630
$1.558
$1.530
Mouser Electronics
$3.020
$2.050
$1.890
$1.770
Newark
$3.110
$2.120
$1.920
$1.870
DigiKey
$3.560
$2.239
$1.952
Master Electronics
$4.580
$4.560
$1.620
TTI
$1.450
Powell Electronics
$1.810
Digiode
$1.121
Nova Conductors
$1.360
VNN
Rapid Electronics
$1.807
IBS Electronics
$1.788
$1.700
TME
$2.220
$1.900
Vyrian
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
Corphita
$1.062
Continental Prestige Electronics
$2.750
$2.200
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Netroflash
$1.333
$1.292
$1.265
Provides excellent conductivity and corrosion resistance for reliable connections.
Offers good insulation properties and durability for long-lasting performance.
Allows for multiple connections in a compact space.
Ensures stable performance even under high temperature conditions.
Can withstand low temperatures, making it suitable for a wide range of environments.
Provides a thick plating for enhanced durability and longevity.
Designed for easy connection to circuit boards.
Meets strict safety standards for fire resistance.
Supports high current signals for optimal performance.
Provides a sleek and professional appearance.
Complies with industry standards for quality and performance.
Allows for multiple connections in a single connector.
Simplifies installation and reduces clutter in the system.
Facilitates easy and precise connections.
Provides a secure attachment to the circuit board.
Standard pitch size for compatibility with various devices.
Suitable for powering devices with moderate current requirements.
Ensures a reliable and secure connection.
Compatible with female connectors for easy mating.
Simplifies installation and alignment.
Provides a good balance between compact size and ease of handling.
Headers & Edge Type Connectors 5-146257-6 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
5-146257-6 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taiwan Semiconductor
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Tesla Elektronicke Soucastky
Plessey Semiconductors Discrete Components Div
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Semicoa
51021-0600
Molex
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
5056
Aries Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Mounting Type: BOARD;
1410186-1
TE Connectivity 1410186-1 is a BOARD CONNECTOR with 72 contacts, 9 rows, and 0.071" contact pitch. It has LIQUID CRYSTAL POLYMER insulator for -55 to 105 °C operation. Ideal for applications requiring FEMALE connectors with SOLDER termination in a STRAIGHT mounting style.
DF1E-6S-2.5C
Hirose Electric
The Hirose Electric DF1E-6S-2.5C is a 6-contact board connector with a mating contact pitch of 0.098". Featuring a dielectric voltage of 650VAC, it has an insulation resistance of 1Gohm and operates b/w -35°C to 85°C. Ideal for commercial applications, this socket-style connector offers crimp termination and is rated for signal currents up to 3A.
10124017-1022121LF
Amphenol Communications Solutions
Amphenol's 10124017-1022121LF is a board stacking connector with 21 contacts, gold flash termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.039", dielectric voltage withstand of 707VAC, and rated signal current of 1A. Ideal for applications requiring durable male connectors with staggered PCB mounting pattern.
1025
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
B5P-VH(LF)(SN)
J S T Mfg
B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.
14-45-0222
Molex 14-45-0222 is a 22-contact board connector with 0.1" pitch, TIN over nickel finish, and glass-filled polyester insulator. It operates b/w -40 to 105°C, rated for 3A signal current, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable male connectors with IDC termination in black color.
DM1AA-SF-PEJ(72)
The Hirose Electric DM1AA-SF-PEJ(72) is a PCMCIA connector with 9 contacts, featuring a mating contact pitch of 0.098". It utilizes liquid crystal polymer insulator material and offers surface mount termination. Ideal for board mounting applications requiring a right angle mounting style.
DF11-16DS-2C(20)
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
746-018-520-606
Edac
Edac 746-018-520-606 is a 2-row card edge connector with 18 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and can handle up to 3A signal current. Ideal for PCB applications requiring high reliability in temperatures ranging from -40°C to 105°C.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
307-074-422-212
Edac 307-074-422-212 is a CARD EDGE CONNECTOR with 74 contacts, 5A signal current rating, and 2545VAC dielectric voltage. It has a 0.156" pitch for PCB mating and operates b/w -40 to 105°C. Ideal for board and panel mounting applications requiring high insulation resistance.
502774-0891
Molex 502774-0891 is a PCB connector with 8 contacts, 0.043" pitch, and surface mount termination. Its compact dimensions of 0.563" x 0.071" x 0.63" make it ideal for right-angle mounting applications in electronics.
22-28-4023
The Molex 22-28-4023 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm, it offers reliable signal transmission at up to 4A current. With a durable design rated for 25 cycles, this male connector has a solder termination type and matte tin finish over nickel for optimal performance.
ZHR-8
ZHR-8 by J S T Mfg is a board connector with 8 contacts, 0.059" pitch, and 500VAC dielectric voltage. It is ideal for applications requiring a polarized housing, such as cable mounting with crimp termination. With a temperature range of -25 to 85°C, it offers reliable performance in various environments.
65823-220LF
Amphenol's 65823-220LF is a 20-contact board connector with nickel palladium gold finish. Featuring 2 rows, it has a terminal pitch of 2.54mm and UL94V-0 flammability rating. Ideal for applications requiring right-angle mounting in headers & edge type connectors.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
22-01-3037
The Molex 22-01-3037 is a board connector with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a durable design with removable contact blocks and polarization key for easy assembly. With an insulation resistance of 1Gohm and operating temperature range from -40 to 105°C, it is ideal for commercial applications requiring reliable connections.
B2P-VH-BK(LF)(SN)
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5-146280-2
TE Connectivity 5-146280-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105°C. Ideal for use in electronics requiring a reliable male receptacle connection with solder termination.
5-146281-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
5-146280-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
5-146285-3
TE Connectivity's 5-146285-3 is a board connector with a mating contact pitch of 0.1 inch. It has a body length of 0.284 inch and insulation resistance of 5000000000 ohm. This male receptacle connector is commonly used in commercial applications, offering a rated current of 3A and a max operating temperature of 105°C.
5-146285-2
TE Connectivity 5-146285-2 is a board connector with mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and operating temperature range from -65 to 105 °C. It is used in applications requiring a rated current of 3A, male contact gender, and solder termination type.
5-146277-2
TE Connectivity 5-146277-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has UL 94V-0 flammability rating and can handle up to 3A signal current. Ideal for commercial applications requiring reliable connections on PCBs.
5-146281-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Ports: 1;
5-146256-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
5-146256-5
TE Connectivity 5-146256-5 is a board connector with 10 contacts, rated at 3A. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and matte tin finish. Ideal for applications requiring reliable signal connections in commercial settings with operating temperatures ranging from -65 to 105 °C.
5-146280-3
TE Connectivity 5-146280-3 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin finish, it has a rated current of 3A and operates b/w -65 to 105°C. Ideal for use in headers & edge type connectors on PCBs.
5146733-1
TE Connectivity's 5146733-1 is a PCMCIA connector with LIQUID CRYSTAL POLYMER insulator, 2 loaded rows, and 68 contacts. It features PREASSEM CONN contact design, 30u plating thickness, and UL 94V-0 flammability code. Ideal for board mounting applications requiring a male contact gender and surface mount termination.
5-146468-6
TE Connectivity 5-146468-6 is a board stacking connector with 6 contacts, rated at 3A for signal current. Insulation resistance of 5000000000 ohm and operating temperature range from -65 to 125 °C make it suitable for various applications in electronics. The connector features polyethylene insulator material, UL flammability code of 94V-0, and solder termination type.
5-146257-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
5-146130-3
TE Connectivity 5-146130-3 is a male plug board connector with 8 contacts, rated at 3A. It features a mating contact pitch of 0.1", matte tin finish, and polyethylene insulation material. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -65 to 125°C.
5-146861-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: CSA, LR, U; Terminal Length: .115 inch;
5146023-1
PCMCIA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 4; DIN Conformance: NO;
5146025-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Reference Standard: UL;
5-146468-8
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Filter Feature: NO;
5146888-1
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
5-146250-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.54;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved