Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIRE AND CABLE;
Median Price
$3.602
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$3.459
Vyrian
VNN
Nova Conductors
Advanced Electronics
$7.122
$6.766
Semicontronic
$7.500
$7.312
$7.275
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Electrical Wires & Cables 44A0111-16-98-L030 attributes and parameters. Explore more Electrical Wires & Cables devices from TE Connectivity
Connector Accessory Type:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Devices
3051/1YL001
Alpha Wire
3801/09
3m Electronic Products Division
3m Electronic Products Division's 3801/09 wire is a UL and CUL approved stranded cable with tin finish, PVC insulation, and copper conductor. Ideal for high power applications, it has a rated voltage of 300V, operating temperature range from -20 to 105°C, and consists of 9 conductors in a flat cable design.
2153300210
Molex
CABLE ASSEMBLY;
18642
Helukabel
WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Conductor Material: BARE COPPER; Jacket Material: POLYURETHANE; Additional Features: STANDARDS: DIN VDE 0285-525-2-21; DIN EN 50525-2-21;
M22759/11-22-0
Allied Wire & Cable
WIRE AND CABLE; Shielding: NO; Stranding: 19X34; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL; SAE; Additional Features: STANDARD: MIL-W-22759/11;
151670321
Molex 151670321 flat cable with 16 conductors, rated for 60V and 0.5A. Constructed with tin-finished copper alloy conductors and polyester insulator. UL approved, suitable for applications requiring -40 to 105 °C operating temperature range.
1233160005
Weidmueller & Kg
Weidmueller & Kg's 1233160005 is a stranded communication cable with shielding, PE insulator, and copper alloy conductor. It has approvals from ANSI, CUL, EN, IEC, UL for applications requiring RJ45 connectors and operating temperatures b/w -20 to 60°C.
3051/1GR005
Alpha Wire's 3051/1GR005 is a CSA and UL approved electrical wire with solid construction, PVC insulation, and tinned copper conductor. Rated for 300V, it operates b/w -40 to 105°C. Ideal for flexible cord and fixture wiring applications.
P006-010
Tripp Lite
Tripp Lite P006-010 is an 18 AWG power cable with NEMA5-15P and IEC-320-C13 connectors. It has a rated voltage of 125V and can handle a max current of 10A. This cable is suitable for use with PCs, monitors, and servers in temperatures ranging from -20°C to 60°C.
A-MCSP-80010/B-R
Assmann Wsw Components
A-MCSP-80010/B-R by Assmann Wsw Components is an electrical cable with PVC jacket, shielding, 26 AWG wire gauge, and 5.2mm diameter. It features RJ45 connectors on both sides with 8 conductors. Ideal for high-speed data transmission in networking applications.
RJF22G03100BTX
Amphenol RJF22G03100BTX is an IEC-approved communication cable with 8 conductors, RJ45 connector, and 0.3mm length. Ideal for robotics and industrial process control applications, it operates b/w -40°C to 85°C temperature range.
12504
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; DIN Conformity: NO; Wire & Cable Name: CONTROL CABLE;
SATAPOWADAP
Startech.com
SATAPOWADAP by Startech.com is a 15-conductor power cable with LP4 MALE and SATA POWER connectors. It is designed for SERIAL PERIPHERAL DEVICES, with a temperature range of 20-80°C. The cable features POLYVINYLCHLORIDE jacket material and CE approvals.
6547FE8771000
Belden
M22759/34-20-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; No. of Conductors: 1; Maximum Operating Temperature: 150 Cel;
151661034
Molex 151661034 flat cable with UL approval, rated for 60V and -40 to 105°C. Features tin finish copper alloy conductor, polyester insulator, and 33 conductors of AWG 37. Ideal for electrical wiring applications requiring a max current of 0.35A in limited space environments.
M22759/11-22-9125
Carlisle Interconnect Technologies
Carlisle Interconnect Technologies' M22759/11-22-9125 wire is MIL-approved, stranded with silver finish, and PTFE-insulated. It operates b/w -55 to 200 °C, with a resistance of 0.0495 ohm. Ideal for smoke emission, overload stability, and flammability applications.
5010/15CSL002
Wires and Cables;
115101-30-18.00
UR050-003
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
44A0111-22-9
TE Connectivity
TE Connectivity's 44A0111-22-9 cable is a stranded wire with 600V rating, TIN finish, and 22 AWG size. Ideal for general purpose applications, it has a temperature range of -65 to 150°C. This flexible cord and fixture wire features copper alloy conductor material in a lightweight construction.
44A0111-20-0
TE Connectivity's 44A0111-20-0 is a STRANDED wire with TIN finish, rated at 600V. With a conductor made of COPPER ALLOY, it has a diameter of 1.4mm and operates b/w -65 to 150 °C. Ideal for GENERAL PURPOSE applications, this FLEXIBLE CORD AND FIXTURE WIRE is lightweight and features a cross section area of 0.62 mm2.
44A0111-20-9
TE Connectivity's 44A0111-20-9 cable features stranded construction, rated for 600V with TIN finish. Ideal for general purpose applications, it has a temperature range of -65 to 150°C and a conductor material of copper alloy. With a wire gauge of 20 AWG and diameter of 1.4mm, it is suitable for flexible cord and fixture wire needs.
44A0111-20-0-MX
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Wire Size: 20 AWG; Wire Gauge (AWG): 20; No. of Conductors: 1; Minimum Operating Temperature: -65 Cel;
44A0111-22-95
TE Connectivity's 44A0111-22-95 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 22 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. Suitable for SPEC 44 cable types, this wire is commonly used in flexible cord and fixture wire applications.
44A0111-22-91
TE Connectivity's 44A0111-22-91 is a 600V rated wire with TIN finish, suitable for applications requiring flexibility. With a conductor made of copper alloy and operating temperatures ranging from -65°C to 150°C, it is ideal for use in fixtures and cords. The wire has a diameter of 1.19mm, stranding of 19X34, and is categorized under SPEC 44 cables.
44A0111-24-9
TE Connectivity 44A0111-24-9 is a STRANDED wire with TIN finish, rated at 600V. It has a conductor made of COPPER ALLOY, 24 AWG size, and 19X36 stranding. Ideal for GENERAL PURPOSE applications due to its lightweight design, it operates b/w -65°C to 150°C temperatures.
44A0111-28-9
TE Connectivity's 44A0111-28-9 is a stranded electrical wire with a rated voltage of 600V. It features a tin conductor finish and PVDF insulator material, making it suitable for use in flexible cord and fixture applications. With a max operating temperature of 150°C and min operating temperature of -65°C, this wire is designed to withstand extreme conditions.
44A0111-22-9-L038
44A0111-28-0
TE Connectivity's 44A0111-28-0 wire is stranded with a tin finish, rated for 600V. With a conductor made of copper alloy, it operates b/w -65 to 150°C. Ideal for general purpose and lightweight applications, this flexible cord has a diameter of 0.76mm and stranding of 7X36.
44A0111-22-911
TE Connectivity's 44A0111-22-911 wire is MIL-W-81044 approved with a 600V rating. Featuring stranded construction, radiation-crosslinked PVF jacket, and tin finish copper alloy conductor, it operates b/w -65 to 135 °C. Ideal for applications requiring flexible cord and fixture wire up to 0 AWG size.
44A0111-22-92-US
44A0111-22-90-MX
TE Connectivity's 44A0111-22-90-MX is a 600V rated wire with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring 22 AWG copper alloy conductor, it is ideal for flexible cord and fixture wire applications due to its 19X34 stranding and compatibility with SPEC 44 cable types.
44A0111-24-9-MX
WIRE AND CABLE; Rated Voltage: 600 V; Maximum Wire Size: 24 AWG; Stranding: 19X36; Minimum Operating Temperature: -65 Cel; Cable Types: SPEC 44;
44A0111-22-900
TE Connectivity's 44A0111-22-900 is a MIL-W-81044 approved wire with 600V rating, suitable for applications requiring flexible cord and fixture wire. Featuring radiation-crosslinked PVF jacket, tin finish conductor, and copper alloy material, it operates b/w -65 to 135 °C with resistance of 0.053 ohm.
44A0111-24-93
TE Connectivity's 44A0111-24-93 cable is a flexible cord with 24 AWG copper alloy conductor, rated for 600V. With PVDF insulation and TIN finish, it operates b/w -65 to 150°C. Ideal for electrical applications requiring durable wires in harsh environments.
44A0111-16-9
TE Connectivity 44A0111-16-9 is a stranded electrical wire with 600V rating, tin finish, and 16 AWG gauge. Ideal for general purpose and lightweight applications, it has a temperature range of -65 to 150°C. Featuring copper alloy conductor material, it is suitable for flexible cord and fixture wire types.
44A0111-22-0
TE Connectivity's 44A0111-22-0 wire is stranded with tin finish, rated for 600V. With a conductor made of copper alloy, it has a diameter of 1.19mm and can operate b/w -65 to 150°C. Ideal for general purpose applications, this flexible cord and fixture wire is lightweight and designed for use in various electrical setups.
44A0111-16-9-MX
TE Connectivity's 44A0111-16-9-MX is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 16 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. With a diameter of 1.83mm and stranding of 19X29, it is suitable for FLEXIBLE CORD AND FIXTURE WIRE installations.
44A0111-16-96
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Conductor Material: COPPER ALLOY; Insulator Material: PVDF; Minimum Operating Temperature: -65 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved