Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 292336-2 USB connector features Matte Tin termination, POLYETHYLENE insulator, and COPPER ALLOY contacts. With a rated current of 1A, it is ideal for telecom & datacom applications requiring durable board mounting with right angle shell style.
Median Price
$3.520
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$2.800
100+ parts
$2.390
1k+ parts
$1.800
10k+ parts
-
DigiKey
$2.620
$2.269
$2.027
Mouser Electronics
$2.260
$2.100
Newark
$3.960
$2.850
$2.660
$2.430
Element14
$4.360
$2.830
TE Connectivity
$5.060
$4.480
$4.090
Chip1Stop
$2.210
$1.430
$1.420
Arrow
$1.250
Verical
$2.290
Nova Conductors
$1.980
Digiode
$2.356
Vyrian
VNN
TME
$2.440
Electro Sonic
$2.670
$1.530
IBS Electronics
$6.279
$6.006
$2.197
PC Components Company LLC
Bristol Electronics
ComSIT Distribution GmbH
Argo Parts USA
Continental Prestige Electronics
$1.940
Netroflash
Corphita
$2.232
Kepictronics
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
The compact body size of the connector allows for easy installation in tight spaces, making it versatile for different applications.
High insulation resistance ensures reliable signal transmission and minimizes the risk of electrical interference or short circuits.
The matte tin finish with a nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term durability and performance.
With a high maximum operating temperature, this connector can withstand heat and maintain functionality in various environmental conditions.
The right-angle mounting style allows for easy and secure attachment to circuit boards, optimizing space and providing a clean layout for efficient connectivity.
Telecom & Datacom Connectors 292336-2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
292336-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Drawings Document Clarification 19/Jul/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Daco Semiconductor
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
RJHSE-3381
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD AND PANEL;
PCR-E96LMD
Honda Tsushin Kogyo
PCR-E96LMD by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with glass-filled polybutylene terephthalate insulator, copper/nickel shell finish, and zinc alloy shell material. It features solder termination, right-angle mounting style for board/panel use, and UL flammability rating of 94V-0.
555153-1
TE Connectivity's 555153-1 is a Telecom & Datacom Connector with 0.7" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYESTER insulator material, SPLIT BOARD LOCK mounting option, and operates b/w -40 to 85°C.
57-30500
Amphenol
Amphenol 57-30500 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 2 rows. It has a dielectric voltage of 700VDC, gold termination finish, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission in telecom and datacom systems.
RJHSE-5080-A1
TELECOM AND DATACOM CONNECTOR;
17-101604
Conec
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: 17-1;
43202-4101
Molex
The Molex 43202-4101 is a telecom & datacom connector with 0.44" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecommunications equipment due to its durable brass shell, right-angle mounting style, and female contact gender.
1543
Aptiv
1543 by Aptiv is a Telecom & Datacom Connector with insulator material GLASS FILLED POLYAMIDE, shell finish NICKEL/TIN, and connector type TELECOM AND DATACOM CONNECTOR. It features mounting type BOARD, shell material BRASS/STEEL, and termination type SOLDER/SURFACE MOUNT. Ideal for male contact gender applications in telecommunications and data communication systems.
74320-9014
Molex 74320-9014 is a Telecom & Datacom Connector with 29 contacts, rated at 3A. It features a glass-filled polymer insulator, tin-plated finish, and operates b/w -20°C to 85°C. Ideal for board and panel mounting in commercial applications.
UJ2-BH-1-TH
Cui
UJ2-BH-1-TH by Cui is a USB connector with 4 contacts, rated at 1A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1000000000 ohm, suitable for telecom & datacom applications. With a durable design lasting up to 1500 cycles, it offers right-angle mounting with solder termination for reliable performance in various electronic devices.
6-2301994-0
TE Connectivity 6-2301994-0 is a EMI shielded connector with Liquid Crystal Polymer insulator. It has 8 contacts, board mounting option, and solder termination type. Ideal for telecom & datacom applications due to its right angle mounting style and UL flammability rating of 94V-0.
48404-0003
Molex 48404-0003 USB connector with gold termination, 9 contacts, and blue insulator. Ideal for telecom/datacom applications with right-angle mounting and solder termination. Features staggered PCB contact pattern and durable stainless steel shell.
5557969-1
TE Connectivity 5557969-1 is a Telecom & Datacom Connector with EMI shielding. It features 0.715" body length, 0.66" width, and 0.658" depth. Ideal for telecom applications due to its UL-rated durability and polarization key for polarized housing.
5556416-1
TE Connectivity's 5556416-1 is a Telecom & Datacom Connector with 0.625" body length, 0.655" width, and 0.65" depth. Featuring Matte Tin finish, it has 500000000 ohm insulation resistance. Ideal for telecom applications, this connector offers a rated current of 1.5A and operates b/w -40 to 85°C temperatures.
67643-3911
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
2171830001
SS60000-009G
Bel Fuse
Bel Fuse SS60000-009G is a Telecom & Datacom Connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and 8 FEMALE contacts. It features SPLIT BOARD LOCK mounting option for 2 PCB rows spaced at 2.03mm. Ideal for applications requiring TELCOM, MODULAR connectors in RIGHT ANGLE mounting style with POLARIZED HOUSING and COPPER ALLOY shell material.
5178647-4
TE Connectivity 5178647-4 is a Telecom & Datacom Connector with Dielectric Voltage of 500VAC, Insulator Material GLASS FILLED POLYAMIDE66, and Operating Temperature range -55 to 85 °C. It has 36 contacts for signal current up to 1A, suitable for board mounting in telecom and datacom applications.
5-554739-3
Commscope
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Filter Feature: NO;
RJHSE-5381-A1
Amphenol RJHSE-5381-A1 is a telecom & datacom connector with 8 contacts, POLYETHYLENE insulator, and TIN shell finish. It operates b/w -55°C to 85°C, suitable for board mounting in telecommunications applications. Featuring a right-angle mounting style and staggered PCB contact pattern, it offers secure solder termination for female connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
292304-1
TE Connectivity's 292304-1 USB connector features POLYETHYLENE insulator, 1000000000 ohm insulation resistance, and 29.92u TIN plating. Ideal for telecom & datacom applications with a rated current of 1A, right angle mounting style, and durability of 1500 cycles.
292303-1
TE Connectivity's 292303-1 USB connector has a body length of 0.576", insulation resistance of 1000000000 ohm, and operates b/w -55 to 85 °C. Ideal for telecom/datacom applications, it features solderable retention clips for board mounting and a shell made of copper alloy.
292303-4
TE Connectivity's 292303-4 is a Telecom & Datacom Connector with 0.575" body length, POLYETHYLENE insulator, and 1000000000 ohm insulation resistance. Ideal for board mounting with solderable retention clips, it operates b/w -55 to 85 °C and has a durability of 1500 cycles.
292304-2
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
292336-1
TE Connectivity's 292336-1 USB connector features matte tin finish, polyethylene insulator, and copper alloy contacts. With a rated current of 1A, it is ideal for telecom & datacom applications requiring high durability and reliability in temperatures ranging from -55 to 85°C.
292303-7
TE Connectivity's 292303-7 is a telecom and datacom connector with a max operating temperature of 85°C and a min operating temperature of -55°C. It has a shell material made of copper alloy, with a tin finish and solderable retention clips for board mounting. This connector is commonly used in telecommunications and data communication applications.
292303-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: DETENT;
292304-5
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e4;
292303-5
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulation Resistance: 1000000000 ohm;
292304-3
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
Tyco Electronics Amp
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Rated Current - Signal: 1 A; Body Depth: .619 inch; Body Length: .474 inch;
292303-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Insertion Force (N): .278;
292304-4
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Length: .119 inch;
292323-1
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Plating Thickness (inch): 29.92u;
292323-5
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Contact Pattern: RECTANGULAR;
292323-6
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 1+1; Insulator Color: BLACK;
292303-2
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 2;
292303-6
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 4; Terminal Length: .09 inch;
292303-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved